ARTISTE TECHNOLOGY TN100 Wireless Earbuds User Guide

ARTISTE TECHNOLOGY TN100 Wireless Earbuds

1. Product name: TN100
2. Bluetooth version: 5.3
3. Horn size: 10 mm
4. Horn impedance: 320 ÷ 15%
5. Sensitivity: 110.6 ‡ 3dB at 1KHz/-10dBFS
6. Nominal power of Horn: 3mw
7. Talk Time: 4.5H
8. playing time: 5H
9. standby time: 200H
10. Earphone size: 30.921.923.2mm Weight (Each)3.2g
11. Dimensions of charging box: 64.024.249.5mm Weight 48.5g

Dimensions of charging box

1. Left and right earphones x1
2. Charging Bay: (Box) x1
3. Type-c Charging wire x 1
4. Instruction manual x1

Boot / shutdown / pairing operation steps

1. Power on: open the charging compartment cover and take out the headset, it will automatically power on and the white light of the headset will flash quickly.
2. Put the left and right headphones back into the charging warehouse (box) cover, then the left and right headphones automatically turn off and charge, can not connect to the device (mobile phone, etc.).
3. If you are using the headset for the first time, please open the charging compartment (case) without pressing any buttons, the headset will pair automatically. Turn on the Bluetooth function of your device and search for “TN100”.
4. When the headset is used again, it automatically connects back to the last device you paired it with.
5. Power on/off/pairing operation: open the charging compartment (case), the headset is automatically paired, the headset is put back into the charging compartment, and the cover is closed to automatically turn off the power.
6. If you want to connect to another device [mobile phone, etc.],the last time you want to connect to another device [mobile phone, etc.] When the connected device is closer to another device, please disconnect the matched device Bluetooth. Please take the left and right headphones out of the charging compartment (box). You do not need to press any keystrokes. The headphones will be automatically matched. Then turn on the Bluetooth feature of your device and search for “TN100”.

• Play/Stop: Click the left and right headphone function keys
• Previous : Double-click on the left headphone function key
• Next song: double-click the right headphone function key
• Volume up: triple-click the right headphone function key
• Volume down: triple-click the left headphone function key
• Transparency, Noise Cancellation On, Noise Cancellation Off: Long press the right headphone function key 3S
• Voice assistant : Long press the left headphone function button 3S

Enjoy your music

Make and receive calls

• Answer and hang up : click the left and right headset function keys
• Decline call: Long press the left and right headset function keys 3S

Headphone Charging

• When the headset is charging: the white light is always on, when it is full, the white light is off.
• Headset low battery prompt: headset white light flashes, when the battery power to 3.1V, headset shutdown
• Charging compartment (box) charging: charging box digital flashing, fully charged has been showing 100 power
• Charging low battery alert: charging box digital display

FCC Warning

changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Model (model): TN100
Rating (rated voltage and current): headset-3.7 V ≤ 35mAh; charging box-3.7V250mAh
Battery (battery): headset-polymer lithium battery; charging box lithium-ion battery

Disposal of waste equipment in private housing by users in EU countries/ regionsThis sign is included on the product or package to indicate that the product shall not be disposed of as general domestic waste. And you have the responsibility to send the abandoned equipment to the designated recycling point of waste power electronic equipment, through the classification collection and recovery of this waste equipment, it is helpful to save natural resources and benefit human health. For more information about the recycling of waste equipment, please contact the local municipal authorities, home waste disposal stations or stores that purchase this product.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>