GRANDJOY W-25(YF) Balance Shower Set Installation Guide
- June 1, 2024
- GRANDJOY
Table of Contents
BALANCE SHOWER
SET INSTALLATION GUIPE
Warranty Duration
Ail parts of this faucet system are warranted to the original purchaser to be
free from defects in material and workmanship for a lifetime.
Repair and Replacement
If the product has defects in material and workmanship within the warranty
period,we will repair or replace the product free of charge.However,you may be
required to provide the invoice when requesting repairs or replacement from
us.
Exclusions
We shall not be responsible for the following cases:
- Damage to the product caused by improper installation,misuse,unauthorized repair or replacement,or abuse(including damage during shipment).
- Damage to the product caused by improper dismantlement after installation.
- Damage resulting from abnormal water pressure and impurities in water pipes is not covered under this warranty.
- Rust on the product due to insufficient care and maintenance is not covered under this warranty.
- Damage caused by natural disasters such as fire,flood,earthquake,electric storms, etc. ,is not covered under this warranty.
I hope this helps! If you have any further questions or concerns,please let me know.
Having Trouble?Contact us.
Email:info@faucetsupport.com
****Toll Free: 1-888-969-6880
Installation Condition
- Check the accessories list to verify that all parts are complete in this package.
- Do not disassemble the main body by yourself.
- Connect inlet pipes to supply valves.
- Make sure inlet pipes and supply valveshave benn installed and cleaned,with noimpurities in the piprline.
- After installation,check all joints for leakages.
- Do not leave the rain shower system exposed to a severely corroseive environment.
YOU MAY NEED:
Two-function Rain Shower System
Model:A
Accessories List
| No. | Part name | Qty | No. | Part name | Qty |
|---|---|---|---|---|---|
| 1 | Shower head | 1 | 9 | Bathtub spout body | 1 |
| 2 | Shower arm | 1 | 10 | Bathtub spout cover | 1 |
| 3 | Shower arm cup | 1 | 11 | Bathtub spout copper | 1 |
| 4 | Main body | 1 | 12 | Bathtub spout screw | 1 |
| 5 | Deck plate | 1 | 13 | Main body spare parts | 4 |
| 6 | Handle | 1 | 14 | Instruction manual | 1 |
| 7 | Handle screw | 1 | 15 | Gloves | 2 |
| 8 | Handle cap | 1 | 16 | Handle wrench | 1 |
Essential dimensions & water pipe line
The installation depth of shower holder and body jet
The thickness of the tile must be calculated for installation.
Connector size of male thread: USA: 1/2″-14NPT, Canada: 1/2″-14NPT, Europe:
G1/2″.
Install The Tub Spout
Step1: Connect the copper connector to the bathtub spout and wrap it with
waterproof tape.
Step2: Install the round decorative cover.
Step3: Rotate the bathtub spout to connect with the internal thread on the
wall.
Installation of the Hand Shower Holder
- Connect shower arm with the cover before screwing arm into riser connection to prevent damage.
- Fix shower head onto shower arm and apply tape to pipe threads on both ends.
- Do not overtighten shower head. It is 360° swivel connection.
Two-function Rain Shower System Model:B
Accessories List
Essential dimensions & water pipe line
♦ The installation depth of shower holder and body jet
The thickness of the tile must be calculated for installation.
Connector size of male thread: USA: 1/2″-14NPT, Canada: 1/2″-14NPT, Europe:
G1/2″.
♦ Installation of the Hand Shower Holder
- Connect shower arm with the cover before screwing arm into riser connection to prevent damage.
- Fix shower head onto shower arm and apply tape to pipe threads on both ends.
- Do not overtighten shower head. It is 360° swivel connection.
♦ Installation The Hand Show Holder
Step1 .Screw the thread into the water pipe inside the wall
Step2.Screw the main body into the thread.
Step3.Rotate and fix the body with the special-shaped wrench
Step4.Connect hand shower and the hose.
♦ Three-function Rain Shower System
Model:C
Accessories List
| No. | Part name | Qty | No. | Part name | Qty |
|---|---|---|---|---|---|
| 1 | Shower head | 1 | 11 | Handle cap | 1 |
| 2 | Hand shower holder | 1 | 12 | Bathtub spout body | 1 |
| 3 | Shower arm | 1 | 13 | Bathtub spout cover | 1 |
| 4 | Shower arm cup | 1 | 14 | Bathtub spout copper | 1 |
| 5 | Showe hand | 1 | 15 | Bathtub spout screw | 1 |
| 6 | Shower hose | 1 | 16 | Main body spare parts | 4 |
| 7 | Main body | 1 | 17 | Instruction manual | 1 |
| 8 | Deck plate | 1 | 18 | Gloves | 2 |
| 9 | Handle | 1 | 19 | Handle wrench | 1 |
| 10 | Handle screw | 1 |
♦ Essential dimensions & water pipe line
♦ The installation depth of shower holder and body jet
♦ Installation Depth Of Main Body(Model : A&B&C)
Notice:
- The installation depth of the main body should be no less than 1 25/32″ (45mm) and no more than 2 31 /32″ (75mm), including the thickness of the tile. Otherwise, the deck plate cannot be installed.
- The opening size of ceramic tile shall be smaller than the deck plate size.
♦ Piping Instructions Before Tiling(Model : A &B&C)
- As shown in the figure, the inlet and outlet pipes are pre-buried. Please pay attention to the correct direction when installing the pre-buried main body.
- Before tiling, turn on the water to test whether the left and right inlet pipes are tightly connected without leakage.
Then, adjust the flow switch to the “on” position to check for leaks in the mixed outlet pipes.
♦ Main Body Valve lnstallation(Model : A &B&C)
- Make marks according to the size of the main body valve, and then drill anchors into the wall (concrete wall).
- Lock the main body to wood directly with screws (wood wall).
- When installing the main body, please mark the UP side up and do not install it upside down.
Please note that the level meter should be parallel to the wall; otherwise, the deck plate cannot be installed.
- Use Main body spare parts and to fixed Main body on the wall and then install deck plate.
- Please fix the main body to the wall install deck plate ,water diverter screw and water diverter cap step by step.
- Install the handle with the screw and handle cap.
Install The Tub Spout
Step1: Connect the copper connector to the bathtub spout and wrap it with
waterproof tape.
Step2: Install the round decorative cover.
Step3: Rotate the bathtub spout to connect with the internal thread on the
wall.
Installation of the Hand Shower Holder
- Connect shower arm with the cover before screwing arm into riser connection to prevent damage.
- Fix shower head onto shower arm and apply tape to pipe threads on both ends.
- Do not overtighten shower head. It is 360° swivel connection.
Do’s
- ln order to keep the mixer surface bright, please clean the mixer regularly.
- Rinse the faucet with clean water and wipe it with a soft cotton cloth.
- Use one of the following cleaners to remove dirt from the surface:
a.Mild liquid cleaner.
b.Colorless glass cleaner and powder cleaner that do not cause abrasion and can be dissolved completely.
c.Polish liquid that does not cause abrasion.
Don’ts
a. Avoid using cleaning powder, harsh cleaning chemicals, brushes and coarse
cloth to prevent scratching and friction.
b. Do not use acid cleaners to clean the faucet as they may cause surface
corrosion of the faucet. If the faucet is exposed to harmful acid substances,
please rinse it immediately with water.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>