amazon basics B0BQQ1QD3R Pull Down Kitchen Faucet Instruction Manual

amazon basics B0BQQ1QD3R Pull Down Kitchen Faucet Instruction Manual

Important Safeguards

Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.
When using the product, basic safety precautions should always be followed to reduce the risk of injury including the following:

DANGER Risk of electric shock! Leaking water can lead to fatal injury from electric shock. Check all connections for leaks. Make sure all supply cords from electric appliances are correctly and safely connected.

• For domestic use only.
• This product should be installed and maintained only by an experienced adult. If in doubt, consult a professional.
• Attempting to incorrectly disassemble or repair the faucet can cause damage to the product or personal property and create additional safety risks such as leaks or flooding.
• Keep children and pets away while assembling the product.
• Do not let children play with the product.
• Do not use this product if any parts are missing, damaged, or worn. Do not over-tighten the fasteners.
• Regularly examine the product for wear and tear. Stop using the product at first sign of damage or if parts become detached.
• The spout can swivel to different positions. Make sure the spout is always positioned within the sink area to avoid flooding and water damage.

Before First Use

DANGER Risk of suffocation!
Keep any packaging materials away from children and pets – these materials are a potential source of danger, e.g. suffocation.

• Remove all the packing materials.
• Remove and review all components before assembly.
• Check the product for transport damages.
• Use the correct tools as needed and follow all instructions to avoid injury.
• Make sure all seals are correctly seated to prevent water leaks.

Tools Needed

Product Description

1. Spout
2. Spray head
3. Handle
4. Outlet hose
5. Quick connector
6. Cold water inlet hose (blue)
7. Hot water inlet hose (red)
8. Pullout hose
9. Faucet body
10. Nut
11. Hose weight
12. Spray booster button
13. Mode change switch

Installation Tips

• For new installations, drill a mounting hole of approx. 1.3-1.5″ (3.3-3.8 cm) in diameter.
• For replacing existing faucets, make sure the mounting hole is the correct diameter.
• Before installing the product, locate the water supply inlets and shut off the water supply valves. These are usually found under the sink or near the water meter.
• Place a bucket under the existing faucet’s water lines to collect leftover water when disconnecting the faucet.
• After shutting the water off, turn the existing faucet on to make sure the water has been completely shut off and relieve water pressure.
• If replacing an existing faucet, remove the old faucet from the sink. Clean any grime or plumber’s putty from the mounting surface.
• Flush all water lines until water is clear before and after installation.

Installation

1. Insert the faucet body (9) into the sink’s mounting hole (Fig. 1).
   

2. Unscrew the quick connector (5) from the outlet hose (4) (Fig. 2).
   
   

3. Slide the nut (10) over all hoses. Press the buttons on each side of the nut (10) then release to secure it to the faucet’s base (Fig.. 3).
   
   

4. Refit the quick connector (5) to the outlet hose (4).

5. Unscrew the cap of the hose weight (11) **(Fig. 4).

**

6. Slide the hose weight’s cap and the hose weight (11) through the pullout hose (8) until the hose weight (11) covers the weight marker (Fig. 5).
   
   

7. Once the hose weight’s cap and hose weight (11) are on the pullout hose (8), refit the cap onto the hose weight (11) (Fig. 5).

8. Attach the pullout hose (8) to the quick connector (5) (Fig. 6).
   
   

9. Attach the hot water inlet hose (7) with red markings and cold water inlet hose (6) with blue markings to the hot and cold water supply lines under the sink (Fig. 7).
   
   

Checking for leaks

1. Make sure the handle (3) is in the off position.
2. Slowly turn the water supply on for each valve. If there are no leaks, open the valve all the way.
3. Pull the handle (3) to make sure there is hot and cold water coming out of the spray head (2).

Flushing the water line

1. Make sure the hot and cold water supply lines are on.
2. Unscrew the spray head (2) from the pullout hose (8) **(Fig. 8).

**

3. Hold the pullout hose (8) down into the sink. Turn the faucet on.
4. Let the water run for 1 minute or until water is clear.
5. Refit the spray head (2).

Operation

Controlling water flow

• Push the handle (3) forward to turn the water on **(Fig. 9).

**

• Push the handle (3) backward to turn the water off (Fig. 9).

Adjusting water temperature
CAUTION Risk of burns!
Hot water can cause burns or scalding on skin. Avoid direct contact with hot water and adjust the temperature carefully. Keep children away from the faucet and never leave them unattended near the sink.

• Turn the handle (3) left for hot water (Fig. 10).
  

• Turn the handle (3) right for cold water ( Fig. 10).

Using the spray head

• Press the spray boost button (12) to intensify the water spray.
• Press the mode change switch (13) to switch between aerator mode and spray mode

Cleaning and Maintenance

Cleaning

• To clean the product, wipe with a soft, slightly damp cloth.
• ► Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.

Cleaning the spray head

1. Unscrew the spray head (2) from the pullout hose (8) (Fig. 8).

2. To remove mineral buildup from the spray head (2), gently scrub the spray head (2) with a medium bristled brush and mild cleaning detergent under running water (Fig. 11).
   

3. Rinse thoroughly with clean water

Maintenance
Check the components regularly to make sure all screws and bolts are tightened.

Frequently Asked Questions

service person for repair.
The product delivers water in an uncontrolled manner| The product or a valve is defective. Call an authorized service person for repair.
The product delivers water in a slow flow or dribble.|

• Fully open the water valve.
• A valve is defective. Call an authorized service person for repair

Water temperature is not consistent.|

• Make sure the hot and cold water supply lines are fully opened.
• A valve or cartridge might be damaged. Call an authorized service person for repair.

The spout (1) does not turn freely.| Clean any mineral buildup from the spout’s turning point
The handle (3) is loose.| Tighten the screw under the handle (3).

Disposal

Dispose of the product according to local regulations. If in doubt, consult your local authorities.

Feedback and Help

We would love to hear your feedback. To ensure we are providing the best customer experience possible, please consider writing a customer review.
Scan QR Code below with your phone camera or QR reader:

If you need help with your Amazon Basics product, please use the website or number below.
amazon.com/gp/help/customer/contact-us

+1877-485-0385

Documents / Resources

| amazon basics B0BQQ1QD3R Pull Down Kitchen Faucet [pdf] Instruction Manual
B0BQQ1QD3R Pull Down Kitchen Faucet, B0BQQ1QD3R, Pull Down Kitchen Faucet, Down Kitchen Faucet, Kitchen Faucet, Faucet
---|---

References

• Amazon Basics
• Amazon Sign In
• Amazon Iniciar sesión
• Amazon Iniciar sesión
• Amazon Sign-In

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>