MONKEY LOOP ML-DT1 Distortion Effect Pedal for Guitar User Manual

MONKEY LOOP ML-DT1 Distortion Effect Pedal for Guitar

Product Information

Specifications:

• Product Name: Monkey Loop ML-DT1
• AC/DC Adapter Jack : Use only specified AC adapter, and connect it to an AC outlet of the correct voltage.
• Level Knob : Adjusts the level of the effect sounds.
• Tone Knob : Controls the tone. Rotating counterclockwise makes the sound milder, while clockwise makes it sharper.
• Input Jack : Accepts signals from a guitar or other effect pedals.
• Gain Knob : Adjusts the amount of distortion. Clockwise increases the effect, counterclockwise reduces it.
• Output Jack : Connect to your amp or another effect pedal’s input.
• Pedal Switch : Turns the effect ON/OFF.
• Indicator: Shows whether the effect is ON or OFF.

Product Usage Instructions

1. Power Connection:
   Use the specified AC adapter to connect to the AC/DC Adapter Jack and plug it into a suitable power outlet.

2. Setting Controls:

   • Adjust the Level Knob to set the desired volume of the effect sounds.
   • Use the Tone Knob to control the tone. Rotate it to make the sound either milder or sharper.
   • Turn the Gain Knob to adjust the amount of distortion, increasing it by rotating clockwise and reducing it by rotating counterclockwise.

3. Connecting to Equipment

   • Plug your guitar or other effect pedals into the Input Jack.
   • Connect the Output Jack to your amplifier or another effect pedal’s input.

4. Activating and Deactivating:

   • Use the Pedal Switch to turn the effect ON or OFF.
   • The Indicator will show whether the effect is currently active or not.

FAQ (Frequently Asked Questions)

• Q: Can I use any AC adapter with Monkey Loop ML-DT1?
  A: No, only use the specified AC adapter to ensure proper functioning and avoid damage to the product.

• Q: How do I know if the effect is activated?
  A: The Indicator will show whether the effect is ON (activated) or OFF (deactivated).

USER’S MANUAL

SPECIFICATIONS

• Input Impedance : 500 kohm
• Output Impedance : 150 ohm
• Recommended Load Impedance : 10 kohm
• Equival Input Noise: -90 dBu or less
• Current Draw : 5.5 mA (DC 9V)
• Dimension : 94mm×42mm×48mm
• Weight : 133g
• Accessory: Owner’s Manual, Velcro tape1 pair

OVERVEIW

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>