MONKEY LOOP MLA-10AC Antennas User Manual
- June 16, 2024
- MONKEY LOOP
Table of Contents
MLA-10AC
USER’S MANUAL
PRECAUTIONS
Location
Using the unit in the following locations can result in a malfunction.
- In direct sunlight
- Locations of extreme temperature or humidity
- Excessively dusty or dirty locations
- Locations of excessive vibration
- Close to magnetic fields
Power supply
Be sure to turn the power OFF when the unit is not in use. Remove the battery
in order to prevent it from leaking when the unit is not in use for extended
periods. If using a power adapter, please connect the designated AC adapter to
an AC outlet of the correct voltage.
Do not connectit to an AC outlet of voltage other than that for which your
unit is intended. Interference with other electrical devices Radios and
televisions placed nearby may experience reception interference. Operate this
unit at a suitable distance from radios and televisions.
Handling
To avoid breakage, do not apply excessive force to the switches or controls.
Care
If the exterior becomes dirty, wipe it with a clean, dry cloth. Do not use
liquid cleaners such as benzene or thinner, or cleaning compounds of flammable
polishes.
Keep this manual
After reading this manual, please keep it for later reference.
Keeping foreign matter out of your equipment
Never set any container with liquid in it near this equipment. If liquid gets
into the equipment, it could cause a breakdown, fire, or electrical shock. Be
careful not to let metal objects get into the equipment.
CONTROLS AND FUNCTIONS
- GUITAR Input: Link to an acoustic guitar by guitar cable
- GUITAR VOLUME: Use this knob to control guitar volume
- MIC Input: Link to a microphone
- MIC-VOLUME: Use this knob to control microphone volume
- AUX In: Link to MP3 player or smart phone by 3. 5mm gauge audio cable
- Music Volume: Adjust music volume
- MASTER Volume: Adjust master volume
- Power Switch: Switch On/Off power. When power is On, the indicator is lit.
- Power Adapter In: Link DC 12V (DC min = 5V) adapter
- Battery Compartment: Load 6 AA batteries.
Remind: When AC 12V adapter is connected, the batteries power is cut off.
When the adapter link off, the batteries power is connected automatically
again.
BATTERY LOAD
Please load batteries by steps as below when needed:
- Press the buckle and pull out to open the battery compartment lid as shown by diagram ①②.
- Insert two batteries according to the polarity direction marked as shown by diagram ③ And then press the joint area as shown by diagram 4 to load batteries successfully.
- Load all the other four batteries following step 2 and cover the battery compartment lid.
SPECIFICATIONS
Max. output :10W
Speaker spec: 5 inch, 4Ω
Power : 6 AA batteries, or enclosed AC adapter
Dimension : 238x179X224mm
Net weight : 2.83kg
Accessories : AC adapter ( DC12V/1A ), manual, 3.5mm gauge audio cable,
shoulder strap, hand strap.
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if notinstalled and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which there ceiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2)this device must accept any interference received,
including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body