GZYOFO MY-123 Mesh Nebulizer Instruction Manual

GZYOFO MY-123 Mesh Nebulizer Instruction Manual

Mesh nebulizer system

The main unit and the following parts are non sterile and can be reused:

Instructions

for use Please read these instructions carefully before first use. If you do not understand any portion of these instructions, contact your healthcare provider

Intended usefIndications for use: The Ultrasonic Mesh Nebulizer designed to aerosolized liquid medications for inhalation by patient, the device may be used with pediatric (>4 years of age), defined by the prescribed medication, and adult patients in the home, hospital and sub-acute care settings Itis not

intended for use with Pentamidine.

A\ Keep these Instructions for future reference Retain carton and packing materials for storing the unit or for product
returns. A\Cautions – Nebulizer is intended for SINGLE PATIENT USE, to deliver multiple doses. «Itis not to be used by patients that are unconscious or not breathing spontaneously. « The patient or the patient’s care giver is the intended operator of the device. – Only use this nebulizer with medications prescribed by your physician. – Do ot place or store the product where it can fall into water. – Do not submerge the main unit in water or other liquid cleaning agents. +If the main unit is accidentally dropped into a liquid, immediately disconnect the AC adapter from the wall outlet, prior to removing the main unit from the liquid. + Any liquid spilled on the main unit should be allowed to dry before
operating + Do not position the product where it is difficult to disconnect the plug. + Adult supervision is necessary when this product is used by, on, or near children or physically challenged individuals or individuals with learning difficulties.
Use this product only for its intended use as described in this manual Failure to do so may compromise performance. Only use accessories provided with the nebulizer and recommended by the manufacturer. Store in a clean place out of the reach of children. « Do not disassemble or modify the nebulizer in anyway. There are no serviceable parts. “The battery is non-replaceable. « The shelf life of the battery is 300cycles from the date of use « Never charge o operate this product f it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. + Do not connect to other equipment not described in these instructions. + Do not charge your device on an aircraft, « Keep the power cord away from heated surfaces. « The nebulizer must be operated using the specified power sources. « Always check the inside of the mouthpiece assembly or mask for any debris before use. « Do not use while operating a vehicle. « Never use when lying down.
Do not use in an anesthetic o ventilator breathing system. « Nebulizer and all its parts (including battery) must be disposed of properly and according to the local regulations in force (for example the WEEE directive). – Small parts can be inhaled or swallowed. In addition, the cable, due to its length,may resultin provoking strangulation or asphyxiation. Do not leave the device alone with a small child or physically challenged individual or individual with learing difficulties.
Never poke the mesh, or clean it with any sharp objects. This could damage the mesh and prevent your device from operating properly.
Do not autoclave the device.
Report unexpected operation or events to your seller “Precautions are to be taken in the event of changes in the performance of the device, please refer to the troubleshooting section.

Charging the battery

1. power supply This nebulizer is powered with lithium batteries. The battery can be charged with USB connect to 5Vd.c. 1.0A min. power supply with the USB cable . 1) Connect the power adapter to the socket on the side of the nebulizer 2) Plug the other end of the power adapter into the wall outlet 3) The LED

will PULSE BLUE

4. Charge the battery until the LED turns SOLID GREEN indicating it is fully charged.

Assembly Nebulizer

Please clean and disinfect nebulizer before first using and after each using, then dry it, (See details on page 16 )Use One hand to hold the Main Unit, the another hand to hold the Atomizing bottle. Push the cup along the slot, until the cup and the unit fitlevel. (Picture 3 )

NOTE!

1. If the Atomizing bottle isn’t assembled in the right place, the device may not be able to operate normally

Add medicine liquid

1.  One hand to hold the Main Unit, another to open Atomizing bottle buckle:
2. Add medical liquid into the Atomizing bottle and Please note: Maxmedicine liquid is 8 ml;
3. Tighten the Atomizing bottle cover.

Open the cover, add medicine liquid then close the cover, Fasten the cup cover Picture 4 Add Liquid Medicine NOTE! 1) After putting medicine liquid in, prevent nebulizer shaking or inverted
which may cause the leakage of medicine liquid. 2) When the Charger is used, remove the power plug from the electrical outlet before using the device.
4.How to use your nebulizer Nebulizer Accessories are categorized as mouthpiece, adult mask and child mask. Please choose appropriate accessories as your needs. 1) Connect mouthpiece or connect mask as Picture 5; (il 4 =

Picture

5 Mask Assembly and Mouthpiece Assembly 2) Press the switch with 3s to tum on the machine, the blue light is keeps on,

Hold the Main Unit by one hand, Hold the Atomizing bottle by the other
hand, remove the Atomizing bottle along the slot in picture 8; 3) Open the lid, pour all the residual liquid Atomizing bottle, and promptly clean and disinfect the device, allow the parts to air dry and store the device in a clean environment. See pages 14 and 16 for more
information.

Maintenance of the Nebulizer o After each use, first discard all residual medicine, and remove The attachment from the Main Unit to clean and disinfect. Dry the parts immediately after washing. « Be sure to turn off the device. « Do not store when Main Unit, Atomizing bottle and accessories (mouthpiece and masks)have any remaining liquid or moisture. 1.Cleaning 1. Atomizing bottle . Masks and Mouthpiece 1.1.0pen the atomizing bottle. masks and mouthpiece, and discard any residual medicine; 1.2. Pour a small amount of hot pure water (Suggest temperature is above 85 C/185°F) into the Atomizing bottle and close the Cap.
1.3. Press the ON/OFF for 3s, Tum on the device to nebulize the pure water for 2-3 minutes to remove residual medicine from the mesh holes. 1.4. Brush the atomizing bottle, masks and mouthpiece under running water for at least 3 minutes with a clean brush. Then rinse those components at least 3L pure water. 1.5.Gently wipe off excess water with gauze and allow the parts to air dry in a clean environment.

Expected service life:

(1) The device is advised used in 3 years ; For the battery, the device can be used for approximately 5 days after charging if operating for 30 minutes a day and the battery cycle life is 300 cycles.

CAUTION:

(1) Continued use of a device that exceeds its use life may result in reduced effectiveness, malfunction, or increased risk of infection from damaged device materials. (2) If corrosion, discoloration, rupture or poor sealing of equipment or parts are found by visual inspection, they are not allowed to be used

LED Indication:

Troubleshooting

Product Specifications

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>