Estelaqua WF316997AAB Flip Top Vanity Desk with Drawers Instruction Manual
- June 1, 2024
- Estelaqua
Table of Contents
Estelaqua WF316997AAB Flip Top Vanity Desk with Drawers
Assembly Instructions
ITEM NO. WF316977 WALL MOUNTED MAKEUP VANITY
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts, which may have come loose inside the carton during shipment. Identify and count all items and compare with the PARTS LIST and/or HARDWARE LIST shown below.
Caution: Please read the instructions thoroughly before assembly.
- We recommend that you assemble this product with the assistance of another person; this will make the assembly easier and will help eliminate damage to the product or injury to persons during assembly.
- Please do not over-tighten screws or bolts until the assembly is completed.
- Please put all parts on a non-abrasive floor before assembly, and follow the assembly steps to assemble your newly purchased product correctly and efficently.
PARTS LIST
HARDWARE LIST
ASSEMBLY TOOLS REQUIRED ( NOT INCLUDED) PLEASE BE CAREFUL DO NOT TO DAMAGE THE HOLE POSITION WHEN YOU USE POWER TOOLS!
INSTALLATION INSTRUCTION
Choose your desired Makeup Vanity location on your wall. Using the wall anchor
spacing dimensions graphic below, begin to line up and mark where you will
need to drill holes for the Wall Anchors ( 2) Using a 2⁄5” drill bit, drill
holes on the marks you made on on your wall, then push the Wall Anchors ( 2)
for the proper wall type, into the holes. 
Product Specifications
- Item No.: WF316977
- Product : Wall Mounted Makeup Vanity
- Origin : Made in Vietnam
Frequently Asked Questions (FAQ)
Q: Do I need any special tools for assembly?
A: You will need a power drill with a 2/5 inch drill bit, and a screwdriver
for assembly. Ensure not to damage the hole positions when using power tools.
Q: Can I assemble the product alone?
A: It is recommended to assemble the product with the assistance of another
person to ensure easier assembly and prevent damage or injuries.
Q: What should I do if I find missing parts?
A: If any parts are missing, please contact customer support for assistance
in obtaining the required components.