Schr der Midi Albany Gen2 Installation Guide
- June 1, 2024
- Schr der
Table of Contents
Schr der Midi Albany Gen2
Features
Tools
All the tightening torques values are given for assemblies without the addition of a grease decreasing friction.
Dimensions
Windage area (Post-top)
| Front 0°| Side
Cd. S| 0.184 m²| 0.104 m²
Cs. S| 0.019 m²| 0.035 m²
Cl. S| 0.076 m²| 0.036 m²
| Suspended| Post Top
---|---|---
Deep Protector| Flat Glass| Deep Protector/
Flat Glass
A (mm)| 263
B (mm)| 555| N/A| 906
C (mm)| 555 Ø
D (mm)| 629| 337| N/A
Mass (kg)| 8.8 +/- 0.5| 11.8 +/- 0.5
Torque control
Visual control
Assembly operation
A1. Packaging – Suspended
B1. Mechanical Installation – Suspended
C1. Opening – Suspended
D1. Electrical Installation – Suspended
No main cable
E1. Tilting Angle Suspended
A2. Packaging – post top
Deep Protector
OR
Flat glass
B2. Mechanical Installation – post top
F. Closing
G. Connection – No main cable supply
Line and neutral MUST be respected !
SAFETY INSTRUCTIONS
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person. Always switch off the power prior to installation, maintenance or repair activities.
RISK GROUP 2
CAUTION! Hazardous optical radiation may be emitted from this product. Do not stare at the luminaire when operating as it may be harmful to the eyes. The luminaire should be positioned so that prolonged staring at the luminaire at a distance of less than 0.94m is not expected.
ENERGY EFFICIENCY
This product contains a light source of an energy efficiency class G or higher or see table on first page.
PVC INSULATION AND Y CONNECTION
In case of PVC insulated mains cable, the installer MUST ensure that the WHOLE cable is protected against climatic conditions, especially UV rays and rain, by making sure that the cable is contained inside the luminaire and pole. Y-connection: In case of damage to the wire, it has to be replaced only by the manufacturer, distributor or by an expert, to avoid risks.
Customer Support
