GHWMYD AP14 Smart Ball Pump User Manual
- June 1, 2024
- GHWMYD
Table of Contents
GHWMYD AP14 Smart Ball Pump User Manual
packing list
| Ball pump | 1 | hose | 1 |
|---|---|---|---|
| instructions | 1 | ball needle | 2 |
| Box | 1 |
Product parameters
Working temperature: 0-45 ° C
Working noise: 1m < 10dB
Input: DC 5V/1.0A Maximum output pressure: 18PSI
Product size : 42x42x166mm
Product weight: 145 g
Product Introduction
3 AA batteries need to be installed
- Air pressure (a)
- Power display
- ATMOS
- Increase pressure (can be long pressed)
- Turn on/off (long press) Inflation (click)
- Reduce pressure (can be long pressed)
- LED lighting (short press)
- SOS flash (short press twice
Operating instructions
- Install 3 AA batteries
- Connect the hose to the needle and then connect it to the hose interface of the ball pump
- Start : Long press and hold the power button
- Inflation: Short press the power button” to start inflation,
- Pressure preset: Set an appropriate pressure value through” or ” to increase orReduction, for preset values, please refer to the surface of the filling ball or reference table
- Stop: Automatically stops when the actual measured pressure value reaches the preset pressure value; Manual stop: Short press the” o button
- Measuring air pressure: Connect the ball needle, and the product displays the air pressure value of the measuring ball through the display (a)
Ball reference pressure value
- Children’s toy ball
- Basketball 7-9PSI
- Football 10-12PSI
- Volleyball 4-6PSI
- Rugby 3-6PSI 10-18PSI
The recommended inflation pressure is for reference only. please refer to the instructions for the inflated product.
Precautions:
- Do not leave during inflation
- Keep away from flammable and explosive materials.
- Avoid moisture, sediment intrusion, or dripping.
- Do not store the product in a place that is too hot or too cold
Mini and Convenient
Preset air pressure
LED Flashlight
Automatic Accurate
Low Noise
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>