Fisher and Paykel BGRV2-3030H 30 Inch Range Backguard for Combustible Situation Owner’s Manual
- June 1, 2024
- FISHER and PAYKEL
Table of Contents
Fisher and Paykel BGRV2-3030H 30-Inch Range Backguard for Combustible
Situation
Product Information
The BGRV2-3030H is a 30″ Range Backguard designed for combustible situations. It is made of stainless steel and features a utensil rail and 2 plate racks, intended for use with freestanding ranges. This backguard is suitable for installation where a non-combustible surface is required. It is compatible with 30 V2 Professional Dual Fuel, Induction & Gas Ranges.
Usage Instructions
- Ensure the installation area meets the requirements for a non-combustible surface.
- Position the backguard behind the freestanding range, ensuring it is securely attached.
- Utilize the utensil rail and plate racks for convenient storage of kitchen tools and cookware.
- Regularly clean the stainless steel surface with a mild detergent and soft cloth to maintain its appearance.
INSTRUCTION
Stainless steel backguard with utensil rail and 2 plate racks for use with freestanding ranges. This backguard is suitable for installation where a non- combustible surface is required. Compatible with 30″ V2 Professional Dual Fuel, Induction & Gas Ranges
DIMENSIONS
- Height 26 1/2″
- Width 29 7/8″
- Depth 1 5/16″
- Total net volume inches
SPECIFICATIONS
- Product dimensions
- Depth 1 5/16″
- Height 26 1/2″
- Width 29 7/8″
- SKU 71271
The product dimensions and specifications in this page apply to the specific product and model. Under our policy of continuous improvement, these dimensions and specifications may change at any time. You should therefore check with Fisher & Paykel’s Customer Care Centre to ensure this page correctly describes the model currently available. ? Fisher & Paykel Appliances Ltd 2020
A PEACE OF MIND SALE
- 24 Hours 7 Days a Week Customer Support
- T 1.888.936.7872 W www.fisherpaykel.com
FAQ
- Q: Is the backguard compatible with all types of freestanding ranges?
- A: The backguard is compatible with 30 V2 Professional Dual Fuel, Induction & Gas Ranges from Fisher & Paykel.
- Q: How do I clean the stainless steel surface of the backguard?
- A: Use a mild detergent and a soft cloth to wipe down the stainless steel surface regularly.
- Q: Can the backguard be installed by the consumer or does it require professional installation?
- A: It is recommended to have the backguard installed by a professional to ensure proper installation and safety.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>