amazon basics B0C455XT4T Smart 3 Outlet Surge Protector Power Strip with 2 USB Ports Instruction Manual

: June 1, 2024
: amazon basics

Table of Contents

amazon basics B0C455XT4T Smart 3 Outlet Surge Protector Power Strip with
Product Information
Product Usage Instructions
Parts Overview
Package Contents
Set Up with Alexa
Change Settings with Alexa
Use the Power Strip
Troubleshooting
Safety Instructions
FCC
Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

amazon basics B0C455XT4T Smart 3 Outlet Surge Protector Power Strip with

2 USB Ports

amazon-basics-B0C455XT4T-Smart-3-Outlet-Surge-Protector-Power-Strip-with-2
-USB-Ports-PRO

Product Information

Specifications

Model: B0C455XT4T
Features: 3 AC outlets, 2 USB ports (1 USB C)
Compatibility: Works with Alexa
Safety: Should not be mounted on a desk or similar surfaces

Product Usage Instructions

Parts Overview and Understanding the LEDs
The power strip includes various components:

A – Overload protection button
C – Barcode for Alexa setup
D – Power cord
F – AC outlets
G – Power button
I – USB-A port
J – USB-C port

Set Up with Alexa

Download the latest version of the Alexa app from the app store and log in.
Plug in the power strip.
In the Alexa app, tap More from the bottom menu, then tap Add a Device.
Follow the on-screen instructions to complete the setup. Scan the QR code on the back of the device when prompted.

Change Settings with Alexa
Use the Alexa app to customize plug names, create groups/rooms, or set up automation routines.

Using the Power Strip

Connect up to three devices to the AC outlets.
Utilize the USB-A and USB-C ports for charging mobile devices. These ports are always active.
To control via Alexa, access the Devices section in the app and select Plugs to manage each outlet.

Reset to Factory Defaults
To reset the power strip to factory settings, press and hold the power button (G) for approximately 10 seconds until the RESET LED (H) blinks red and green alternately.

Troubleshooting

If the device does not turn on, reset it by pressing the button.
If the Alexa app cannot locate or connect to the device, refer to additional FAQs at www.amazon.com/B0C455XT4T.

FAQ

Device does not turn on
If your device does not power on, press the reset button to resolve the issue.
Alexa app cannot find or connect to the device
If you encounter difficulties connecting your device via the Alexa app, ensure you are following proper setup procedures and refer to FAQs at www.amazon.com/B0C455XT4T.

Parts Overview

amazon-basics-B0C455XT4T-Smart-3-Outlet-Surge-Protector-Power-Strip-with-2
-USB-Ports-1

Parts Overview and Understanding the LEDs

A	Overload protection button
B	Outlet on/off buttons with LEDS

On: Outlet is turned on

Off: Outlet is turned off

C| Barcode for Alexa setup
D| Power cord
E| Protected LED

On: Devices are protected from power surges

Off: Devices can still be powered, but they are not protected. You should replace your power strip to protect your devices from power surges.

F| AC outlets
G| Power button
H| Reset LED

Blinks green: Ready for setup (times out after 15 minutes)

Solid red for one minute, then off: Device not registered with Alexa

Solid green: Device connected

Blinks red: Device disconnected

Alternately blinks red and green: Factory reset initiated

I| USB-A port
J| USB-C port

Package Contents

Smart Power Strip
User Manual

Set Up with Alexa

Download the latest version of the Alexa app from the app store, then log in.
Plug in the power strip.
In the Alexa app, tap More from the bottom menu, then tap Add a Device.
Tap Plug, Amazon Basics, then select your device.
Follow the steps in the Alexa app to complete the setup. When prompted, scan the QR code on the back of the device.

Change Settings with Alexa

Use the Alexa app to rename a plug, add plugs to a group/room, or set up routines that automatically turn a plug on or off.

Use the Power Strip

Plug in up to three devices into the AC outlets.
Plug in mobile phones, tablets, and other USB devices with the USB-A and USB-C ports. Both ports are always on.
To control with the Alexa app, tap Devices, the tap Plugs to control each outlet.
Note: Use the voice control on your Amazon Alexa. (For example, “Alexa, turn on the first plug.”)

Reset to Factory Defaults
Press and hold the power button (G) for about 10 seconds until the RESET LED (H) alternates blinking red and green.

Troubleshooting

NOTICE
For more FAQ and more information, go to www.amazon.com/B0C455XT4T

Device does not turn on

Make sure the power strip is connected to a working power outlet.
Make sure the outlet that your device is plugged into is turned on.
Make sure the overload protection button is not popped up. If it is, press the button to reset it.

Alexa app cannot find or connect to the device

Make sure that your phone/tablet and the Alexa app are using the latest software version.
Make sure your phone/tablet is within 98 ft. (30 m) of the power strip.
Make sure you scan the barcode in this User Manual or on the back of the power strip. Do not scan the barcode on packaging for setup.
Unplug the power strip and plug it back in.
Make sure that your phone/tablet and power strip are connected to the same 2.4GHz network. The power strip is not compatible with 5GHz networks.
If you have a dual Wi-Fi router and both network signals have the same name, rename one and try reconnecting to the 2.4GHz network.
Do a factory reset. See “Reset to Factory Defaults.”

WARNING
Do not plug the power strip into an extension cord, surge protector, or power strip.

Safety Instructions

This surge protector should not be mounted on a desk or similar surfaces.

For optimum performance, use the surge protector according to this User Manual.
Plug the surge protector into a 125VAC outlet.
Do not plug more than a total of 1,250 W into this surge protector.
Unplug the surge protector after use.
Do not use the surge protector with electronics that do not conform to its specifications.
If the surge protector stops working because of over-current, overtemperature, or short-circuit protection, unplug the surge protector and electronics (push the overload protection button back if it popped up) to reset it. Make sure that the connected devices are compatible with the surge protector before you continue to use it.
Do not place the surge protector close to fire or heat sources, such as a stove or candle.
Do not let the surge protector fall into liquid, such as a swimming pool or bathtub.
Do not wash the surge protector with corrosive cleaners.
If the surge protector does not work properly, contact the store or distributor in your area.

FCC

FCC – Supplier’s Declaration of Conformity

Unique Identifier| B0C455XT4T – Smart 3-Outlet Surge Protector Power Strip with 2 USB ports (1 USB C). Works with Alexa
---|---
Responsible Party| Amazon.com Services LLC.
U.S. Contact Information| 410 Terry Ave N. Seattle, WA 98109 USA
Telephone Number| 206-266-1000

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Compliance Statement

FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.

RF Warning Statement:
The device has been evaluated to meet general RF exposure requirements. This device should be installed and operated with a minimum distance of 8” (20 cm) between the radiator and your body.

Canada IC Notice

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.

This Class B digital apparatus complies with Canadian CAN ICES-003(B) / NMB-003(B) standard.

Specifications

Input	125V AC, 60Hz
Input Plug	3-prong US plug
AC Socket Total Output	10A
Power	1,250W max.
Cable Length	3.5 ft. (1 M)
USB Output	USB-A: 12W MAX (5V/2.4A)

USB-C: 20W MAX (5V/3A or 9V/2.22A or 12V/1.67A)

Total: 15.5W MAX (5 V/3.1A)

Surge Protection| 800 joules
Wi-Fi| 2.4GHz
Surge Protection| 3-line protection (1,200V L-N, 1,200V L-G, 1,200V N-G)

Feedback and Help
We would love to hear your feedback. To ensure we are providing the best customer experience possible, please consider writing a consumer review.
If you need help with your Amazon Basics product, please use the website or number below.
amazon.com/gp/help/customer/contact‑us
+1 877‑485‑0385

amazon.com/AmazonBasics