VEZEK 3 Ft Wrought Iron Handrail Stair Railing Grab Bar Kit Installation Guide
- June 1, 2024
- VEZEK
Table of Contents
VEZEK 3 Ft Wrought Iron Handrail Stair Railing Grab Bar Kit Installation Guide
Thanks for purchase from Vezek® handrail, this wrought iron handrail designed for wall mounted depending on your need. In order to finish the installation, you need to prepare a hammer drill with 5/16 inch concrete drill and a hand electric drill .
Installation steps:
- As the photo, connect the bracket to the handrail with the black stainless self tapping screw. Brackets location is adjustable, it can match the studs perfectly.
- Put the rail exactly where you want it and take a sharpie and mark the holes for the bracket.
- Drill the holes with the hammer drill using bits made especially for drilling concrete(2″ depth), then knock the anchor into the wall with a rubber hammer, if you want to install it on other materials, you need to prepare the corresponding fasteners and drill.
- Align the handrail bracket hole with the anchor, insert the screws and tighten it.
If there are any unusual occur,please feel free to contact with us,we will do our best to help you solve it.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>