kwikboost KB93800 Multi Device Charging Locker Cable Replacement Instruction Manual

June 1, 2024
kwikboost

kwikboost KB93800 Multi Device Charging Locker Cable Replacement

kwikboost-KB93800-Multi-Device-Charging-Locker-Cable-Replacement-
FIG-1

Product Information

Specifications:

  • Product Model: 8-Bay/10-Bay Multi-Device Charging Locker
  • Replacement Cable Bundle: KwikBoost Standard Replacement Cable Bundle
  • Number of Lockers: 8-Bay Quantity 2, 10-Bay Quantity 2

Product Usage Instructions

Accessing the Electronics:

  1. Unplug the Charging Locker from the wall outlet.
  2. Access the electronics by unlocking and opening the door located on the back of the locker.
  3. Before proceeding further, take photos of the cable routing and zip tie placement for future reference.

Cable Replacement:

  1. Unplug the charging cables from the charging modules.
  2. Use wire cutters to remove the zip ties securing the old cables.
  3. Remove the old cables by sliding them out of the cable holes.
  4. Plug the replacement cables into the charging modules.
  5. Secure the cables with zip ties.
  6. Route the cables through the cable holes into the charging lockers.

Cable Routing and Selection:

  • An 8-bay locker will feature three charging modules and 16 cables. A 10-bay locker will feature four charging modules and 20 cables.
  • Lockers ship from the factory with two cables routed into each locker bay unless specified otherwise by the customer. You can customize the mix of cables and/or the number of cables routed to each locker bay based on your device charging needs.

Frequently Asked Questions (FAQ)

  • How do I access the charging modules for cable replacement?
    You can access the electronics by unlocking and opening the door located on the back of the locker. Remember to unplug the Charging Locker from the wall outlet before proceeding.

  • Can I customize the number and type of cables routed to each locker bay?
    Yes, you can customize the mix of cables and/or the number of cables routed to each locker bay based on your unique device charging needs.

Included Hardware

  • 8- Bay Locker
    QTY 2 KwikBoost Standard Replacement Cable Bundle:

    • 6 USB Type-C cables
    • 4 Micro-USB cables
    • 6 Apple Lightning cables
    • 4 Zip ties
  • 10- Bay Locker
    QTY 2 KwikBoost Standard Replacement Cable Bundle:

    • 6 USB Type-C cables
    • 4 Micro-USB cables
    • 6 Apple Lightning cables
    • 4 Zip ties
  • Plus the following cables, individually sold

    • 2 Apple Lighting cables
    • 1 USB Type-C cable
    • 1 Micro-USB cable
    • 2 Zip ties (not included)

Required Tools

kwikboost-KB93800-Multi-Device-Charging-Locker-Cable-Replacement-
FIG-2

Assembly

  1. Unplug the Charging Locker from the wall outlet.

kwikboost-KB93800-Multi-Device-Charging-Locker-Cable-Replacement-
FIG-3

  1. Access the electronics by unlocking and opening the door located on the back of the locker.
    TIP: Before proceeding to Step 3, take photos of the cable routing and zip tie placement for future reference.

kwikboost-KB93800-Multi-Device-Charging-Locker-Cable-Replacement-
FIG-4

  1. Unplug the charging cables from the charging modules.
    NOTE: Your charging module may differ slightly in appearance from the example shown in the photo.

kwikboost-KB93800-Multi-Device-Charging-Locker-Cable-Replacement-
FIG-5

  1. Use the wire cutter to remove the zip ties securing the old cables. Then, remove the old cables by sliding them out of the cable holes.

kwikboost-KB93800-Multi-Device-Charging-Locker-Cable-Replacement-
FIG-6

  1. Plug the replacement cables into the charging modules, secure the cables with zip ties, and then route the cables through the cable holes into the charging lockers.

kwikboost-KB93800-Multi-Device-Charging-Locker-Cable-Replacement-
FIG-7

Cable Routing and Selection

  • An 8-bay locker will feature three charging modules and 16 cables.
  • A 10-bay locker will feature four charging modules and 20 cables.
  • Unless otherwise specified by the customer, lockers ship from the factory with two cables routed into each locker bay and will feature the mix of cable types outlined below.
  • This is strictly a guideline. Depending on your unique device charging needs, you may want to customize the mix of cables and/or the number of cables routed to each locker bay.
  • 8-Bay
    • Bay 1: Lighting, USB Type-C
    • Bay 2: Lighting, Micro-USB
    • Bay 3: Lighting, USB Type-C
    • Bay 4: Micro-USB, USB Type-C
    • Bay 5: Lighting, USB Type-C
    • Bay 6: Lighting, Micro-USB
    • Bay 7: Lighting, USB Type-C
    • Bay 8: Micro-USB, USB Type-C
  • 10-Bay
    • Bay 9: Lighting, USB Type-C
    • Bay 10: Lighting, Micro-USB

Need more info?

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals