Whitehall Manufacturing P-10-MU Whitehall Series Podiatry Whirlpool, Mobile, Gallon Instruction Manual

Podiatry Whirlpools

P Series
10 Gallon
Mobile Whirlpool
P-10-M, P-10-MH, P-10-MU

Division of
Acorn Engineering Company®

A MEMBER OF

P-10-MU Whitehall Series Podiatry Whirlpool, Mobile, Gallon

Whitehall P-10-M Mobile Whirlpools are recommended for treatment of the foot and ankle area, and when provided with a raised undercarriage, may also be used in treatment of the upper extremities.
Tank Capacity is 10 gallons.
P-10-MH is a Mobile Whirlpool with Handle of heavy duty construction with the hand grip section approximately 36” above ground level for ease in maneuvering the whirlpool from one location to another.
P-10-MU is a Mobile Whirlpool with Undercarriage of heavy duty construction and fixed height which raises the tank for use in treatment of the upper extremities.
Whirlpool Tank is 22”L x 13”W x 12”D and is seam less welded construction, fabricated from heavy gauge, type 304 stainless steel, polished to a satin finish. Tank rim is reinforced with a concealed stainless steel rod. Tank bottom is a seamless, coved (rounded) design for effective cleaning to minimize bacteria buildup.
Heavy Duty Swivel Casters support all mobile models. Rear pair of casters are lockable for stabilizing whirlpool during treatment.
Turbine Raising and Lowering Device permits adjustment of desired height and direction of water agitation towards the area of the body to be treated. It is spring balanced and provided with a locking device.
Turbine Assembly functions both as agitator and emptying device. It is equipped with Underwriters Laboratory listed 1/2 HP jet pump motor protected with an ABS plastic shell, automatic thermal overload protector, and lifetime- sealed bearings. All parts contacting the water are stainless steel, chrome- plated brass or bronze.
Drain option -SDP has a bottom drain, leading to a separate, concealed water evacuation pump. A hose is attached to the side of the unit to facilitate the evacuation.
Thermometer is provided with a dual scale, adjustable calibration, and a stem inserts into a retainer to prevent rattle during whirlpool agitation.

GUIDE SPECIFICATIONS

Provide Whitehall Mobile Whirlpool (specify model number and options) with a 10-gallon capacity, 22″L x 13″W x 12″D. Whirlpool shall be fabricated from heavy gauge, type 304 stainless steel. Construction shall be seamless welded and exposed surfaces shall be polished to satin finish. Bottom of tank shall be a seamless, rounded coved design to minimize bacteria build up. Whirlpool shall have heavy-duty swivel casters with locking device on rear pair of casters. Provide a turbine assembly with raising and lowering device which functions both as agitator and emptying device, permits adjustment of desired height, direction of water agitation, and can be locked into place. Turbine assembly shall be UL listed 1/2 HP jet pump motor with automatic thermal overload protector and lifetime-sealed bearings. Provide a thermometer with a stem retainer to prevent rattling when the whirlpool is in operation.

MODEL NUMBER AND OPTION SELECTIONS

Series
P Podiatry Series

Capacity
10 Gallons

Type

 -M
 -M-MH
 -M-MU| Mobile Whirlpool
Mobile Whirlpool with Handle
Mobile Whirlpool with Undercarriage
---|---

Turbine Electrical Requirements

115VAC / 50Hz
230VAC / 50Hz| 115VAC / 60HZ
230VAC / 60HZ
---|---

Suffix Options (See Whirlpool Options Section for Details)

-ADH Auxiliary Drain Hose Assembly
-AHC2 Adjustable High Chair with Rubber Tips
-ALC Adjustable Low Chair
-ALS Adjustable Low Stool
-ARS Arm Rest Support
-EG Enviro Glaze Color Powder Coating

Specify Color:____
(Special Finishes Consult Factory)

-GFI Ground Fault Interrupter
-HL Hydro Lift (Refer To Page HL)
-PCS Pump Strainer Cover
-SDP Separate Drain Pump

Country of Use _____
For Mixing Valve:
Refer to supplemental MXT15 sheet for details.

ELECTRIC REQUIREMENTS:
Amps: 6.9/6.2
Volts: 115
Hertz: 50/60
GFI Receptacle| ELECTRIC REQUIREMENTS:
Amps: 3.5/3.1
Volts: 230
Hertz: 50/60
GFI Receptacle| Certified per US & Canadian
Medical Standards; UL 60601-1 & CSA C22.2 No. 601.1| Certified per
European Standards;
IEC 60601-1
---|---|---|---

NOTES:

1. 1/2 hp Jet Pump Motor
2. Variable Pressure Control
3. Thermometer
4. Stainless Steel Tank| 5. Auxiliary Drain Valve
6. Turbine Raising & Lowering Device
7. Optional -MU Undercarriage
---|---

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

SELECTION SUMMARY & APPROVAL FOR MANUFACTURING

Model Number & Options____Quantity_
Company___Date
Contact____Title
Approval for Manufacturing/Signature__

References

• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>