Vestland 160 x 80 CM Ergonomic Desk Instruction Manual
- June 1, 2024
- Vestland
Table of Contents
Vestland 160 x 80 CM Ergonomic Desk
Technical Specifications
- Height Range: 71cm(28″) – 118cm(46″)
- Travel Speed: 30mm(1.2″) per second
- Weight Capacity: 80KG (176lbs)
- Duty Cycle: 10%, Max. 2 mins on, 18 mins off
- Memory Presets: 3
- Soft Start/Stop
- Adjustable Leveling
Product Usage Instructions
Advanced Setting
Press the S button for 5 seconds until the LED flashes. The menu
contains 7 items as listed below. Press the S button to select the item
you’d like to set, then use the / buttons to adjust the value.
Programming Instructions
Memory Settings
- Use the UP or DOWN button to move the desk to the desired height.
- Press the S button.
- Press the 1, 2, or 3 button to assign the current height to a number on the handset.
- To bring the desk back to any of those assigned heights, press the numbered button.
Handset Lock
The handset can be locked to prevent accidental activation or movement of
the desk. To lock, press and hold the UP and DOWN buttons simultaneously for 5
seconds until the LED reads “Loc.” To unlock, press and hold the UP and DOWN
buttons simultaneously for 5 seconds until the LED switches from “Loc” to the
height display.
Minimum/Maximum/Starting Height Settings
- Minimum Height: Click S Key Once – 108CM / 43″ or 69CM / 27″
- Maximum Height: Click S Key Twice – 116CM / 46″ or 81CM / 32″
- Starting Height: Click S Key Three Times – 0-30CM / 0-11.8″ (PC0 shut down, PC1)
Frequently Asked Questions (FAQ)
Q: What should I do if my desk does not respond to height adjustments?
A: If your desk does not respond when trying to raise or lower it, or
if error messages are displayed on the handset, check to ensure all cables are
securely connected (legs to cables, cables to control box). If the issue
persists, follow thereset procedure below.
Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.
CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Mounts must be attached as specified in assembly instructions. Improper installation may result in damage or serious personal injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, telephone your local distributor for a replacement.
MAINTENANCE
Check that the bracket is secure and safe to use at regular intervals (at least every three months).
Checklist and Installation
Screw List
Installation video
Scan QR-code for installation video
TECHNICAL SPECIFICATIONS
| Height Range | 71cm(28”) – 118cm(46”) |
|---|---|
| Travel Speed | 30mm(1.2”)per second |
| Weight Capacity | 80KG (176lbs) |
| Duty Cycle | 10%, Max. 2 mins on, 18 mins off |
| 3 | Memory y presets Sotf Start/Stop Adjustable leveling |
ADVANCED SETTING
Press the “ S ” button for 5 seconds until the LED °ashes. The menu
contains 7 items as the table belo. Short w press the “ S ” button to select
the item you’d like to set, then use the “ ” buttons to adjust the value. Long
press the “ S ” button to save the setting and a progress bar will appear.
“SUS” will be displayed if it is saved successfully, and “FAL” will be
displayed if it fails. The menu will return to the display height
automatically if no operation within 10 seconds.
PROGRAMMING INSTRUCTIONS
MEMORY SETTINGS
Save up to four commonly used desk heights and recall them quickly.
- Use the UP or DOWN button to move the desk to the desired height.
- Press the “S”button.
- Press the “1, 2, or 3”button to assign the current height to a number on the handset.
- To bring the desk back to any of those assigned heights, press the numbered button.
HANDSET LOCK
The handset can be locked to prevent accidental activation or movement of the
desk and to prevent desk settings from being accidentally changed by children
or coworkers
TO LOC K: Press and hold the “ ” ” ” buttons simultaneously for 5 seconds
until the LED reads “Loc”. TO UNLOCK: Press and hold the “UP”and”Down”buttons
simultaneously for 5 seconds until the LED switches from “Loc”to the height
display.
TROUBLESHOOTING
If your desk does not respond when you try to raise it or lower it, or if the handset displays error messages, check to make sure all the cables are secure(Legs to cables, cables to Control box). If the problem persists, perform the reset procedure below.
RESET PROCEDURE
- Unplug the power cord and hold the “ S ” button on the Handset for 30 seconds.
- Plug the power cord back in.
- Hold the “ “ button until the desk reaches its lowest height, then release. Hold the “ ”button again for about 10 seconds until the desk lowers a bit more, then slightly rises and stops then release.
- The handset will then display the current height, and you should be able to operate the desk.
- You may also need to do this if the desktop is ever unplugged or loses power.
If the error message persists after performing the Reset procedure, contact us or local distributors to get support.
| DESCRIPTION CO | DE | TROUBLESHOOTING SOLUTION |
|---|---|---|
| Abnormal Standby Current | SC0 | Power on again. If the code persists, replace |
the Control Box
Abnormal Power Supply Board| SC1| Power on again. If the code persists,
replace the Control Box
Abnormal Memory| SC2| Power on again. If the code persists, replace the
Control Box
Abnormal Sensor| SC3| Power on again. If the code persists, replace the
Control Box
Collision Protection by Sensor| R-2| The desktop will stop and retract 5cm(2”)
Overheated| HOT| Let the desk rest for 18 minutes
CommunicationaFilure| R-5| Check the connection between Handset and Control
Box or replace Ha
Abnormal Voltage| R-6| Power on again. If the code persists, replace the
Control Box
Mechanical a Filure| R-8| Perform Reset procedure. If the code persists,
replace the Leg
Rest not completed| RST| Perform Reset procedure
Short Circuit| EX0| Power on again. If the code persists, replace the Control
Box
Overload| EX1 Re| duce the load on desk
Motor Open Phase| EX2| Perform Reset procedure. If the code persists, replace
the Leg
Wrong Running Direction| EX3| Perform Reset procedure. If the code persists,
replace the Leg
Collision Protection| EX4| The desktop will stop and retract 5cm (2”)
Motor Stalling| EX5| Perform Reset procedure. If the code persists, replace
the Leg
Disconnections of Motor Cabl| e EX6| Check the connection between leg
and control box
Remarks : X means 1(the First leg), 2(the second leg), 3(the third leg)
In the event of a power outage or if the power cord is unplugged, a manual
reset may be necessary (see Reset Instructions above)
This product is designed with a duty cycle of 10% (2 min. On, 18 min. off)
Keep Children away from electric height-adjustable desks, control units and
handsets. There is a risk of injur y and electric shock
Do not open any of components: lifting columns, control box, or handset.
There is a danger of electric shock
Keep all electrical components away from liquids
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>