Acoustech AU610 In Ceiling Speaker Owner’s Manual

Acoustech AU610 In-Ceiling Speaker

Specifications

Acoustech AuraPro series In-Ceiling Speaker

• Advanced acoustic technology
• Durable construction
• Easy to install
• Years of musical enjoyment

Product Usage Instructions

A. What You Need to Do the Job

• Before starting the installation, ensure you have the following.
• Speaker parts inventory as shown in Drawing 1
• Tools for installation
• Speaker wire
• Amplifier considerations

B. Where to Put Your Speaker(s)

• Determine the placement of your speaker(s) based on various uses such as background music, surround sound, and other acoustic considerations. Consider the wall & ceiling surfaces and plan speaker wire paths accordingly.

C. Painting the Speaker(s) and Grille(s)

• If desired, you can paint the speaker(s) and grille(s) to match your ceiling or wall color. Use paint suitable for the material of the speaker for best results.

D. Cutting Holes for the Speaker(s)

• Follow the provided guidelines to accurately cut holes for the speaker(s) in your ceiling or wall. Take necessary precautions to avoid damage to surrounding structures.

E. Running Connecting Wire(s)

• Run the connecting wire(s) from the amplifier location to each speaker location, ensuring proper cable management, and avoiding interference with other electrical components.

F. Hooking Up Your Speaker(s)

• Connect the wires at both the speaker end and the amplifier end according to the provided instructions. Ensure a secure connection for optimal sound performance.

G. Final Assembly

• Complete the final assembly of the speaker(s) in the designated locations, ensuring they are securely mounted and aligned properly for optimal sound dispersion.

H. A Short Test Drive

• After installation, perform a short test to ensure the speakers are functioning correctly. Adjust settings as needed for the best audio experience.

FAQ

Q: What should I do if any parts are missing from my speaker system?

• A: If any parts are missing after a thorough search of the box and packing materials, contact the dealer where you bought your speaker for assistance.

Q: Can I paint the speakers to match my room decor?

• A: Yes, you can paint the speakers and grilles using paint suitable for the material of the speaker to blend with your ceiling or wall color.

CONGRATULATIONS

• Thank you for selecting this Acoustech Ceiling Speaker. Like all Acoustech speakers, the AuraPro series combines advanced acoustic technology with durability and will provide years of musical enjoyment.
• This manual is designed to make your ceiling speaker as easy to install as it is to listen to. If you’ve had any home “do-it-yourself” experience, you should find installation of your new speaker a simple job.
• However, we suggest you read through this manual before starting out. If you then decide that installing your Acoustech Ceiling Speaker is beyond your skills, we recommend the use of a professional installer.

WHAT YOU NEED TO DO THE JOB

SPEAKER SYSTEM PARTS INVENTORY

• Before you get involved in the actual installation process, it’s a good idea to check for possible shipping damage and identify parts and hardware.
• You should have the parts shown in Drawing 1:
• One (1) Acoustech loudspeaker with one metal grille White cardboard template: one cutout template
• If anything is missing after a thorough search of the box and packing materials, contact the dealer where you bought your speaker.
• Although Acoustech Speakers are extremely well packed to withstand the rigors of shipping, you should still inspect them closely, especially if there is any damage to the outside carton.
• If you find anything wrong, contact your dealer or the shipper who delivered the speaker.

TOOLS FOR INSTALLATION IN EXISTING WALLS

• It doesn’t take a whole workshop to install your new speaker, just a few simple tools:
• A pencil
• A drill with a 1-inch flat bit
• A retractable utility knife or keyhole saw
• A length of stiff wire about 3 feet long (a straightened wire coat hanger works fine)
• A Phillips-head screw driver
• A pair of diagonal pliers or wire strippers Some of the following may also be needed, depending on the application.
• A stud finder
• Drill bit just slightly larger than the diameter of one speaker wire
• Plumb bob or small weight on a string
• Insulated staples for securing speaker wire
• Masking tape or foam “double-stick” tape
• Paint and applicator for changing grille finish

SPEAKER WIRE

• The amount of wire you’re going to need will vary with speaker placement (which we cover next). But we’re covering the subject of wire now because it’s something you may have to go out and obtain along with whatever tools you don’t already have.

What kind to use

• We recommend using inexpensive, multi stranded “zip-cord” for amplifier-to-speaker connections. Also called lamp cord, it’s sold in pre-packed rolls and in bulk displays at hardware, lighting and home improvement stores. Zip-cord’s outside covering (insulation) can be transparent, black, brown, white, etc. Color doesn’t matter. Wire-thickness does. For in-wall and in-ceiling, a good quality wire should be used so the outside plastic covering won’t crack and break down over time.

Selecting the proper gauge

• Wire is measured in “gauges”. For no particularly good reason, the bigger the number, the smaller the wire. For example, 18-gauge is thinner than 14-gauge.
• The gauge of wire you need is determined by the distance between your amplifier/receiver and the speakers.

Use the following chart as a guide:

• Length Minimum Gauge
• Less than 10 ft. 18
• 10 to 50 ft. 16.
• Over 50 ft. 14
• If in doubt, be safe and get a smaller gauge (i.e. thicker wire). Using too thin a gauge over a long distance can compromise sound quality. And besides, there isn’t a vast cost difference between gauges.

How much to buy

• Basically, more than you think you need. As we noted earlier, a discussion of lengths is sort of premature until you’ve decided on exact placement, so you may want to skip to Section B on “Where to put your speakers.” But if you have a rough idea of the distance from your amplifier to the speakers, here are a few tips:
• Because of the complicated paths which are often required to route wires, you’ll definitely need more than the amount derived from simple measurements.
• Even if one speaker is a lot closer to the amp than the other speaker, you should use the same length of wire for both paths. This insures that both speakers will play at equal volume.
• Professional installers often use the following rule of thumb: “As the crow flies” amp to speaker distance TIMES FIVE.
• That allows enough for both speaker paths plus a very healthy margin for unplanned detours. Remember the electrician’s favorite adage:
• You can always cut off extra wire, but you cannot make wire longer once it is cut.

DRAWING 2

• Acoustech ceiling speakers may be used for surround and rear sound channels by placing them (1) behind or (2) in the ceiling, just behind the viewer.

Amplifier considerations

• Virtually any receiver, power amplifier or integrated amplifier can be used with your Acoustech Ceiling Speaker. Although Acoustech speakers are rated for high power, it’s OK to use an even more powerful amplifier if you take some simple precautions, which we cover on page 9 (“Taking care of your new in-ceiling speakers”).
• A more serious consideration is whether or not you intend to power more than one set of speakers with the same amplifier or receiver.
• If you intend to hook speakers to both “A” and “B” receiver outputs and then play both sets of speakers at the same time, you should read the section starting on page 9 of this manual (“More on amplifiers and impedances”), to avoid potential problems.

WHERE TO PUT YOUR SPEAKER

• Since these are primarily used in ceiling applications, we highly recommend installing in an open attic space.
• If you need to go into the ceiling of a first floor room (in a two story house), we recommend the use of a professional installer.
• Placement can make all the difference in how your Acoustech speaker systems sound – and how easy they are to install.
• There are at least three WHERE’S” and a “HOW” to factor into your layout:
• HOW you intend to use your speakers
• WHERE they’ll sound best (acoustic considerations)
• WHERE it’s possible to install them (ceiling surfaces)
• WHERE they can be installed that makes it easy to get wire to them without remodeling your entire house.

VARIOUS USES

• Acoustech Ceiling Speakers can be used for background music, as a primary listening system, or as built-in surround and rear speakers in an audio/video home theater.

Background music

• If you just want low-volume background music to float through a room, placement for best acoustics is not particularly critical. You can pretty well ignore all our diagrams and tips on imaging and other acoustical matters. Just put your speaker where it’s convenient and non-intrusive to room decor. You can even place the speaker in an adjoin- ing room, such as a living room that flows into a formal dining room, or in a kitchen and breakfast nook.

Surround sound

• Acoustech Ceiling Speakers make excellent surround sound speakers. They can be mounted in any of the positions shown in Drawings 2 and 3, especially from the ceiling.

OTHER ACOUSTIC CONSIDERATIONS

For best fidelity, there are several other factors to keep in mind before you start the actual installation.

Vertical Placement

Treble frequencies are quite directional. While the dome tweeters in Acoustech AuraPro series speakers are designed to disperse high frequencies over a wide area, they will give you the best sound when positioned so that they cover the listening area in a cone of coverage as shown in Drawing 4. Of course, if the speakers are being installed in an area where listeners usually stand up (such as a kitchen or hallway), they are best suited for ceiling mount (see Drawing 3).

Corners and reflections

• When a speaker is placed close to the corner of a room, bass frequencies are emphasized.
• Treble is emphasized when it reflects back from reflective surfaces such as large windows.
• Conversely, highs tend to be muffled by soft surfaces such as drapes, rugs, upholstered furniture, carpeted steps and even textured fabric wall paper.
• Now that we’ve covered where you should put your speakers, let’s consider where you CAN put them.
• The installation depth requirements for the AuraPro series speakers, please refer to the specifications table on page 10. (measured from the outside surface of the wall). This means that they can be installed in any space wide and deep enough for them, including most ceilings.Ceiling plasterboard (or lath and plaster in older homes) acts as a superb speaker baffle.
• Because the depth of AuraPro series ceiling speakers is deeper than typical 2̋ x 4̋ wall studs, AuraPro series speakers cannot be installed in most walls.

Avoid:

• Ceilings covered only with thin veneer paneling – the surface isn’t rigid enough and can cause annoying vibrations and buzzing.
• T-bar “drop ceilings” with very thin fiberboard panels which can buzz and vibrate. If you suspect this will happen, reinforce the drop-in panel with wood or particle board.
• Any wall which can’t provide proper depth (clearance) for the back of the AuraPro series speakers to protrude. This includes brick or concrete walls where the wallboard or paneling is attached to thin furring strips.
• Ceilings where you know that there are pipes, heating ducts and ESPECIALLY AC wiring in the general vicinity.

SPEAKER WIRE PATHS

• The last consideration is the obstacle course that lies between the speakers’ hoped-for mounting positions and your stereo system.
• Wire can be run through crawl spaces that lie above your ceiling or below the floor, through basements of second stories, or simply along the perimeter of your listening room.
• We cover each of these options in detail in the “Running connecting wires” section of this manual.

In general, you should pay particular attention to the following areas:

• Avoid running speaker wires close to house electrical wiring for any distance. If you have to run them parallel, make sure to space the speaker wires at least two feet from the AC line.
• It is, however, OK for speaker wires to cross paths with AC line or go through the same hole together with house wiring if they separate before and after.
• Make sure that the entire path between speakers and amplifier is clear and not obstructed by a major floor or ceiling joist or masonry wall which you won’t be able to drill through.
• Remember that the other end of the wires has to come out somewhere to connect with the amplifier. Confirm ahead of time that you can drill an outlet hole easily and in an unobtrusive spot.

PAINTING THE SPEAKER(S) AND GRILLE(S)

• Both the speaker frames and the grilles can be painted, if desired. We recommend doing this before installation. Always paint the grilles separately from the speaker itself.
• First, remove the white scrim cloth from behind the grille. The grilles should only be spray painted very lightly to avoid clogging the fine mesh of the grille and restricting the sound.
• Once the grille is dry, replace the scrim cloth by gently placing it behind the grille. No adhesive is necessary gravity will keep it in place (see Drawing 5).
• Only install the speakers and grilles once the paint has dried thoroughly.

CUTTING HOLES

FOR THE SPEAKER(S)

• Wallboard is an easy surface in which to make a relatively neat hole. Actually, the hole doesn’t even have to be that neat, since the speaker’s outer frame will cover it. Just make sure you don’t make it any bigger than the template. In the following steps, you’re going to locate a section of ceiling between the wood framing or in the wall between two studs, mark the outer boundaries of the hole, drill a small hole in the center to confirm
  your location and then cut the main hole.

1. First you must determine the location of your ceiling supports so that the speaker can be approximately centered between them.
   • There are several ways to go about this:
   • Tap on the surface and listen to the result- ing “THUMP”. When it’s deeper, you’re between studs. When it’s sharper and more flat-sounding, you’re close to a stud.
   • Use a stud-finder, a simple little device which works by locating the studs behind a wall.
   • Identify wall studs by the position of electrical outlets or switches. There will be a stud either directly to the left or right of an electrical fixture.
   • This gives you a point of measurement, since studs are either 18 or 16 inches apart in newer houses, 12 inches apart on pre-WW2 homes.
2. When you’re reasonably sure of where the ceiling joist (studs or framing) are (and are TOTALLY sure that there isn’t an electrical cable, water pipe or heating duct in that vicinity of your proposed cutout) position one of the cardboard mounting templates and draw around the inside outline with a pencil.
3. Drill a 1-inch hole in the center of the pencil outline which you have just drawn.
4. Obtain a length of stiff wire such as an un- wound, totally un-bent coat hanger. Bend it so that the last 12 inches is at a right angle to the rest.
5. Insert the angled part into the 1-inch hole you just drilled and probe to left and right to con- firm that a stud is not close on either side.
6. If there is a close stud on one side, just re-position the cardboard template a few inches in the opposite direction and re-draw your pencil outline, keeping the 1-inch hole within the pencil outline’s inner boundaries.
   • If there are no obstructions, cut the hole along the pencil outline. If the surface is wallboard, simply cut it increasingly deeper with a utility knife until it gives way and then pull it out by grasping the cut-out through the 1-inch hole.
   • If you’re dealing with lath and plaster or thick paneling, you need to use a different technique. Drill 1-inch holes at opposite sides of the pencil outline.
   • Then use a keyhole saw or a hacksaw blade with VERY slow strokes to saw through and remove the inner surface.
7. Temporarily place the Acoustech speaker into the cut-out to insure that it fits properly. It’s OK if the hole is slightly large, since it will be covered by the speaker’s outside frame. Actual installation will happen later, after you’ve routed the speaker wires.
8. Repeat if installing more than one speaker.
9. Now it’s time to drill the hole on the OTHER end – at the point where the wires from the speakers will exit to the amplifier/receiver.
   • Use the same 1-inch drill bit as before.
   • If you want a totally finished job, install an outlet box against a stud and cover it with a TV cable or single outlet plate which has one hole in the middle for the wires to exit from.

RUNNING CONNECTING WIRE(S)

• Now you know where the wires have to run. It’s time to actually route them.
• If you have an attic or overhead crawl space, your two steps are:

1. Route wire(s) up from the amplifier to the crawl space;
2. Route wire(s) across the crawl space to the speaker(s).

ROUTING WIRE UP TO SPEAKER (ATTIC CRAWL SPACE) – DRAWING 7

1. You’re about to ascend into your attic. Grab the following:
   • Tape measure
   • Cordless drill with a 1-INCH BIT (or non-cordless model with long extension cord)
   • A VERY long roll of speaker wire
   • Wire cutters – either diagonal pliers or wire strippers which include a cutting surface.
   • Plumb bob or string with a small weight (such as a metal nut) on the end
   • Tape – any kind will do
2. Crawl up into the attic with all the afore- mentioned stuff and proceed to a spot that’s directly over a speaker cut-out hole.
3. Time to use that roll of cable. Push a cable through the speaker cut-out.
4. Making sure the end doesn’t get pulled back up through the hole, reel out cable while moving across the attic/crawl space until you reach the location above your amplifier.
5. Extend at least 10 (TEN) more feet of cable for the roll and cut it.
6. You now have a cable running from the speaker. Repeat steps above if installing more than one speaker. Time to get them down the wall to where the amplifier will be.
7. Drill a 1-inch hole through the horizontal 2 x 4 directly above the amplifier wall outlet.
8. Now you’re going to guide cables down to where they’ll emerge from the wall. Since this hole isn’t too big, just stuffing them down and grabbing them won’t work.Instead, it’s time for the plumb bob or string-with-weight (or wire if there’s insulation to contend with). Tape the two cable ends (which come from the speaker) to the plumb bob string just above the weight and lower the whole thing down through the 1-inch hole above the amplifier. You’ll likely have to “feed out” the attached cable to get the weight to descend.
9. Continue “feeding out” both cables until they and the weight hit bottom. Tie the free end of the plumb bob string to something so that it doesn’t fall down the hole.
10. Exit the attic crawl space.
11. Go over to the 1-inch amplifier wire hole and look for the extended string/plumb bob and attached cables. If they’re not visible, fish around for them with your stiff wire/unbent coat hanger and pull them through the hole.Then rescue the plumb bob from the attic.
12. At the speaker hole, things are much easier. You can just reach through and grab the cables. Pull their whole free length out the cut speaker hole. You’ve done it!

HOOKING UP YOUR SPEAKER(S)

• The main thing to remember when hooking up a speaker is that two conductors in the speaker wire are not interchangeable. One will be used as a POSITIVE (+) conductor and the other as a NEGATIVE (–) conductor.

• These correspond to the RED (+) and BLACK (–) connectors on your Acoustech Ceiling Speaker and also to the speaker terminals on your amplifier or receiver.
  IDENTIFYING “+” and “–”

• You need to be able to discriminate between the two conductors in the zip cord.

• If your wire has transparent insulation, this is easy: One conductor will be copper-colored and the other silver-colored.

• Generally, professionals denote the copper one as POSITIVE (+) and the silver one as NEGATIVE (–). If you’ve used wire which has an opaque insulation, there are still differentiating markings.

Examine the wire closely and look for:

• A series of ribs or grooves on one conductor
• A painted stripe
• A single strand of yarn intertwined with the multi-stranded wire in one conductor.
• Denote any of these as the POSITIVE (+) conductor for similar connections on both ends.

AT THE SPEAKER END

1. Cut off excess wire, leaving about 2 feet extending through the speaker cut-out hole.
2. Pull the conductors apart so they’re separated for the first two inches from their ends.
3. Using wire strippers, diagonal pliers or a knife, remove 1⁄2 inch of insulation from each conductor.
4. Twist the tiny strands in each conductor into tight spirals, as shown in Drawing 8.
5. IMPORTANT: Route the speaker wire THROUGH the hole in the ceiling (Drawing 9).
6. Attach the speaker wires to the red and black speaker terminals. Press down on the protruding levers while inserting the wire into the hole (Drawing 9).
   • Connect the POSITIVE (+) conductor to the RED terminal and the NEGATIVE (–) conductor to the BLACK speaker terminal.
   • Make sure that no stray strands of wire have gotten detached and are touching the other main wire.

AT THE AMPLIFIER END

1. Cut off excess wire, leaving enough to comfortably reach from the hole in the wall to your stereo system. If there’s a possibility that you’re going to move the amplifier to another part of the room, consider leaving some excess wire coiled up. If you’ve used sufficiently thick wire, this extra length will not affect speaker performance and
   could make things easier if the room is rearranged later.

2. Pull the conductors on speaker wire(s) apart so they’re separated for the first two inches.

3. Using wire strippers, diagonal pliers or a knife, remove 1⁄2 inch of insulation from each conductor.

4. Twist the tiny strands in each conductor into tight spirals.

5. Attach the speaker wires to the red and black speaker terminals on the amplifier or receiver.

   • Connect the POSITIVE (+) conductor to the RED terminal and the NEGATIVE (–) conductor to the BLACK speaker terminal.
   • Connect the POSITIVE (+) conductor to the RED terminal and the NEGATIVE (–) conductor to the BLACK speaker terminal.

FINAL ASSEMBLY

1. If you haven’t done so already during paint- ing, remove the perforated grilles from your Acoustech Ceiling Speaker. To remove the grille, just use the mounting screw (dog leg) on the rear to push the grille off.
2. See Drawing 10. Make sure all the clamping brackets (dog legs) are turned inward as shown in the picture before going up on the ladder to install the unit in the ceiling.
3. Find the wire you ran previously (hopefully hanging down through the hole you cut). Strip the ends if you haven’t already done so and connect as described in Section F.
4. Insert the speaker into the cutout hole and be certain the wire is not hanging down on the woofer cone.
5. Using a Phillips screwdriver (or powered screwdriver, recommended), start tightening the six screws. As you start the tightening each of the mounting brackets (dog legs) will swing around and follow the screw down to the back of the ceiling and clamp the speak- er into place. Avoid excessive force when tightening the screws to prevent deforming the drywall or breaking the plastic clamp of the speaker. Be sure to go around all six screws and check for even tightness in the clamping pressure.
6. Now is the time to aim the tweeter toward your primary listening area. Gently tilt and rotate the tweeter rim so the centers are aiming toward the area you want (See Drawing 11).
7. To attach the speaker grille, position the grille over the speaker frame. Powerful magnets embedded in the frame will draw the grille towards the frame. Be sure the grille is centered properly over the frame and that it snugs down to the correct centered position.

A SHORT TEST DRIVE

At this point, it’s a good idea to test every- thing out.

Home Theater System

If you have connected your new Acoustech Ceiling Speakers to the rear “surround” output of your receiver, you will need to put your receiver in the “Pro-Logic” or “Digital” mode and use a source such as a DVD player or suitably recorded movie to test your receiver surround operation.

Stereo Music System

1. Turn on your stereo system. Make sure that the VOLUME control is turned down and that the BALANCE control is set to center.
2. Activate a musical source such as FM or a CD player.
3. Gently turn up the volume. You should hear music coming out of your new Acoustech Ceiling Speakers! (If you don’t, refer to the troubleshooting guide on the next page. We suggest you read the section on page 9 titled “Taking care of your new in-ceiling speaker” (for further operating tips).

Front Panel Controls

High-Frequency Level Control

This control adjusts the relative level of high-frequency output to compensate for varying room acoustics or placement behind a screen.

• +3dB” is for absorptive, acoustically “dead” rooms (or when the speaker is behind a movie screen). Use this position to increase the High-Frequency level and restore the proper sparkle and liveliness to the sound.
• “HF” is for rooms of average absorptive characteristics.
• “-3dB” should be used in rooms that are highly reflective, with hard floors and exposed windows.
• The setting of the HF control is mostly a matter of personal taste, so try it in all three positions and see which one is preferred (see drawings 12 & 13).

Midrange Frequency Level Control (AU820 only)

• This control adjusts the relative level of the midrange frequency output to compensate for placement behind a screen.
• “MID” delivers the flattest output for placement behind a perforated screen.
• “+3dB” increases the midrange frequency output slightly.
• “-3dB” reduces the midrange frequency output slightly.
• This control can also be used to adjust for different room acoustics (see drawing 13).
• Dipole/Bipole Operation of AU620 and AU820 Speaker
• In Dipole mode the AU620/AU820 produces ambience with minimal localization (best for most movies and video soundtracks).
• In Bipole mode they produce more localizable sound (preferred for some music recordings).
• Switching between Dipole and Bipole mode is easily accomplished using a slide switch located on the front of the speaker.
• Please note that the vast majority of the time in movies and TV broadcasts the surround speakers are called upon to reproduce the environmental sounds that are used as cues to help get you immersed in the scene on the screen.
• Once the surround speakers are properly positioned in the listening area, we recommend that you begin with the dipole mode, as this usually delivers the most involving and believable surround performance in most situations (see drawing 14).

Home Theater (5.1channel) layout

Home Theater (7.1channel) layout

Using the AU620 or AU820 as a “Single Point Stereo” Speaker

• Your AU620/AU820 comes from the factory ready for conventional (mono) use. This means a single speaker will handle a single channel of information, such as what is required for surround channel use.
• If you are going to use your AU620/AU820 speaker for surround channel duties, leave the jumpers in the configuration (see drawing 16). The AU620 and AU820 speakers feature two sets of push-to-connect terminals. You may connect the speaker wires to either set of terminals but the correct polarity of the connections to your amplifier must be maintained.
• If you want to use the AU620 and AU820 as a single-point stereo speaker (where the left and right channels are handled by the single unit), then move the jumpers to the position shown left. Set the Bipole/Dipole switch to the Bipole position so the tweeter is in phase with the woofer.
• Connect the speaker wires for one channel to one set of terminals, and the speaker wire for the other channel to the other set to terminals.
• If the sound form the speaker lacks definition, it is likely the polarity is incorrect. It does not matter which speaker terminals are connected to the left or right channel on your amplifier, but correct polarity is critical (see drawing 18 and 19).

Using two AU620 or AU820 speakers for stereo (conventional / surround use)

Using two AU620 or AU820 speakers for single-point stereo

A QUICK TROUBLESHOOTING GUIDE

Before returning your Acoustech Ceiling Speaker for service, it’s a good idea to check out these simple remedies first.

No sound from the speaker

1. Incorrect source selected on receiver or preamplifier.
2. Mute button pressed on receiver.
3. Wrong speaker output selected – many receivers have an “A” and “B” speaker switch. Make sure it’s in the right position.
4. Un-secure connection at either the speaker or amplifier – double check them.
5. Balance control turned all the way left or right – return it to center.
6. Surround mode not turned on and/or surround level too low.
7. Bad connecting cable between sound source and amplifier – try a new cable.
8. Defective speaker – contact your Acous-tech dealer or call 1-877-558-4242.

Intermittent sound from speaker or speaker plays initially but then shuts off

1. A short circuit at either the amplifier or speaker connectors is activating the amp’s protection circuits – double check connections, making sure no stray strands of wire from one conductor are touching the other.

Speakers plays but the sound is mixed with the hum

1. It could be a faulty patch cord. If so, there will be a hum from your main speaker system as well as from your Acoustech Ceiling Speakers. Assuming you didn’t have hum in your system before, one or both of the speaker wires has been run too close to internal AC house wiring. Re-route it so that it stays at least 2 feet away from AC power wiring when running parallel.

The speaker plays but the sound is muffled and “strained.” The amplifier may shut off if the volume is raised too far

1. Too thin a gauge of wire has been run too far a distance between amp and speaker. Make sure that you have followed our suggestions as to wire gauge versus overall distance.

When volume is turned up to a high level, the treble cuts in and out

1. The Acoustech Ceiling Speaker features a special protection circuit that electronically disconnects the tweeter if it starts getting too hot.
2. Turn down your amplifier and make sure to read the section of this manual titled “Taking care of your new in-ceiling speaker” which starts on this page.

FURTHER READING TAKING CARE OF YOUR NEW IN-CEILING SPEAKER

• Acoustech Ceiling Speakers are designed to last the life of your home – if you follow a few simple rules.
• The main “killers” of a loudspeaker system are 1) too little power at high volumes, 2) too much power at high volume, 3) transient thumps.

Not enough power

• It’s a surprising fact, but far more speakers are damaged by too little power than by too much! When an amplifier runs out of power while trying to re-create musical peaks, it causes a form of high frequency distortion called clipping.
• In moderate amounts, clipping simply makes the music sound terrible. In greater quantities over a period of time, it can damage or destroy the tweeters (high frequency reproduction speakers) in any speaker system.
• If you like your music LOUD, consider getting an amplifier with at least 60 watts per channel.

Too much power

• There’s nothing wrong with driving your Acoustech Speakers with a high power amp – the extra power helps them achieve quick musical transients found in digital recordings. However, you must remember to restrain yourself and not get too heavy-handed with the volume control (or remote buttons). If the music begins to sound distorted or you hear a “clacking” sound during bass notes, back off! And naturally, if the internal protection circuits are intermittently shutting off the tweeter, you’re exceeding its safe power input level.

Transients

• Loud, deep THUMPs, caused when you turn your stereo on or off, can seriously damage any loudspeaker including your Acoustech ceiling models.
• It’s always a good practice to turn the volume down (or press the MUTE button if your receiver has one) when changing sources (such as changing from tuner to CD player input).
• Also remember to turn your system off before disconnecting any hook-up cables. When they’re pulled out, a huge burst of low frequency hum often occurs if the system is still on.

Cleaning

• Acoustech Ceiling Speakers are covered with a durable finish which can be cleaned with soap and water or spray cleaners. Avoid the use of ammonia-based cleaning products, however.
• If you’ve painted the grilles and frames, follow the paint manufacturer’s cleaning instructions.

MORE ON AMPLIFIERS AND IMPEDANCE

• Not all amplifiers or receivers can safely operate two sets of speakers at once. If you intend to use your Acoustech Ceiling Speakers at the same time as your main speakers or if you intend to hook up two sets of Acoustech Ceiling Speakers and use both at the same time, it’s important to consider both the impedance of the speakers and the capabilities of the amplifier you’re using.

• First consult the owner’s manual that came with the amp or receiver. It should tell you the minimum speaker impedances during simultaneous operation. On some models, the manual will recommend that only two pairs of 8 ohm speakers be used at the same time. Others might allow one set of 8-ohm speakers and
  one set of 4-ohm impedance speakers. A few extremely robust receivers and power amplifiers may even allow two sets of 4-ohm speakers.

• If you can’t readily determine this information, consult the dealer where you purchased the amplifier, or call the manufacturer.

• Next, determine the impedance of your other speakers. It’s often printed on the back of the enclosure down near the connection terminals, or you can consult the speaker’s owners’ manual.

• Acoustech Ceiling Speakers are rated at 8 ohms impedance. In general, this means that most amplifiers will allow you to simultaneously operate one Acoustech Ceiling Speaker and one other set of 8-ohm loudspeakers – or two sets of Acoustech Ceiling Speakers.

• If your other speakers are rated at 4 ohms, some amplifiers may experience difficulty driving both sets at once and shut off intermittently when the volume control is turned up.

• In this case, you should operate only one set of speakers at a time or keep the volume extremely low.

INSTALLING ACOUSTIC SPEAKERS DURING NEW CONSTRUCTION

• Needless to say, installing speakers when a house is being built is far easier than doing it later.
• If possible run speaker wires after AC wiring is in place to avoid induced hum caused by close parallel proximity.
• Secure speaker wires in place along the run with insulated staples only and be careful not to pierce the insulation. Allow a bit of slack for the expansion of building materials.
• Needless to say, the actual speakers should not be installed until the wallboard is in place. In the meantime, leave several feet of wire coiled up and secured to the back side of the speaker opening.
• When it comes time to put up the drywall, make sure the speaker cut-out hole doesn’t extend farther than the sides of the mounting frame.
• After the wallboard is put up, install the speakers as detailed on pages 5-6 of this manual.

Specifications

AU510

• Frequency response………………………….. 70Hz-20KHz
• Recommended amplifier power………………………….. 10-100 watts
• Sensitivity………………………….. 90dB
• Woofer………………………….. 5 ¼” PP cone
• Tweeter………………………….. 1” Tetoron + Graphene
• Crossover type………………………….. 12dB per octave
• Impedance………………………….. 8 ohms/input
• Dimensions………………………….. 8” dia
• Required cut-out………………………….. 6 ½” dia
• Required depth………………………….. 4 ⅛”

AU610

• Frequency response. ………………………….70Hz-20KHz
• Recommended amplifier power… …………10-125 watts
• Sensitivity ………………………………………………….91dB
• Woofer …………………………………………6 ¼” PP cone
• Tweeter … ………………………….1” Tetoron + Graphene
• Crossover type ……………………………12dB per octave
• Impedance ……………………………………….8 ohms/input
• Dimensions …………………………………………….9 ½” dia.
• Required cut-out ………………………………………….8” dia.
• Required depth ……………………………………………4 ⅜”

AU620

• Frequency response …………………………..70Hz-20KHz
• Recommended amplifier power ……………10-125 watts
• Sensitivity ………………………………………………….91dB
• Woofer …………………………….Dual coil 6 ½” PP cone
• Tweeter ……………………..Two 1” Tetoron + Graphene
• Crossover type ……………………………12dB per octave
• Impedance ……………………………………….8 ohms/input
• Dimensions …………………………………………….9 ½” dia.
• Required cut-out ………………………………………….8” dia.
• Required depth ……………………………………………4 ⅜”

AU810

• Frequency response. ………………………….50Hz-20KHz
• Recommended amplifier power ……………10-150 watts
• Sensitivity …. ………………………………………………91dB
• Woofer …………………………………………….8” PP cone
• Tweeter …………………………….1” Tetoron + Graphene
• Crossover type … …………………………12dB per octave
• Impedance ……………………………………….8 ohms/input
• Dimensions .. …………………………………………11 ¼” dia.
• Required cut-out ………………………………………9 ⅝” dia.
• Required depth . ………………………………………………5”

AU820

• Frequency response. ………………………….50Hz-20KHz
• Recommended amplifier powe r……………10-150 watts
• Sensitivity . …………………………………………………91dB
• Woofer . ……………………………… Dual coil 8” PP cone
• Tweeter ……………………..Two 1” Tetoron + Graphene
• Crossover type ……………………………12dB per octave
• Impedance . ………………………………………8 ohms/input
• Dimensions ….. ………………………………………11 ¼” dia.
• Required cut-out … ……………………………………9 ⅝” dia.
• Required depth ……………………………………………5 ⅜”
• Due to our continual effort to improve product quality as new technology and techniques become available, B•I•C America reserves the right to revise speaker systems specifications without notice

ACOUSTECH Aurapro series DESCRIPTIONS

• The Acoustech Aurapro series in-ceiling speaker has been ruggedly constructed to withstand not only the extreme dynamic range found in today’s digital sound sources, but also the rigors of temperature variation, dust and moisture encountered in permanent installation.
• Above all, they have been designed to give you the finest possible music reproduction possible in modest sized speakers.

Acoustech Speakers Limited Warranty

• Any implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to the length of this warranty.

Disclaimer

• THE WARRANTY STATED HEREIN IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE AND ALL OTHER LIABILITIES AND OBLIGATIONS OF B•I•C AMERICA, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. B•I•C AMERICA HAS NOT MADE AND DOES NOT HEREBY MAKE ANY OTHER REPRESENTATION, WARRANTY OR COVENANT WITH RESPECT TO THE CONDITION, QUALITY, DURABILITY, DESIGN, OPERATION, CAPACITY, FITNESS FOR USE OR SUITABILITY OF THE B•I•C ELECTRONIC PRODUCT.

Exclusion of Certain Damages

• BIC America’s liability for any defective product is limited to repair or replacement of the product at our option. BIC America shall not be liable for incidental or consequential damages of any kind or character because of product defects.
• Some states do not allow limitation of how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation and exclusions may not apply.

This Warranty Does Not Cover

• Damage caused by abuse, accident, misuse, negligence, or improper operation (installation).
• Products that have been altered or modified.
• Any product whose serial number has been altered, defaced or removed.
• Normal wear and maintenance.
• Damages caused by shipping (All claims for shipping damages must be made with the carrier).

Warranty Service

• Warranty service must be performed by an authorized service center, usually an Acoustech dealer or its authorized agent. You may obtain a list of authorized service centers by calling 1-877-558-4242.
• All warranty repairs must be accompanied by the original bill of sale. No other document is acceptable or required.
• B•I•C America
• 4982 4th Street Irwindale, CA 91706 www.bicamerica.com Tech Support:
• 1-877-558-4242(4BIC)
• B•I•C America. All rights reserved.
• Acoustech is a registered trademark of B•I•C America

References

• Home | BIC America

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>