Shenzhen Hangshi Electronic MW197 2.4G Wireless Keyboard and Mouse User Manual

Shenzhen Hangshi Electronic MW197 2.4G Wireless Keyboard and Mouse

Product Information

• Product Name: 105G Hairbrush and keyskin
• Product Dimensions: 1056941 MM
• Power Source: 1AA battery (for hairbrush) and 2AAA batteries (for keyskin)
• DPI Settings: 800-1200cDefault-1600
• Power Consumption: 30 mA
• Wireless Range: USB receiver

Product Usage Instructions

1. Insert 1AA battery into the hairbrush and 2AAA batteries into the keyskin.
2. Make sure the power switch on both the hairbrush and keyskin is set to “OFF”.
3. Connect the USB receiver to your computer.
4. Press the power switch on the hairbrush to turn it “ON”.
5. Press the left, middle, and right buttons on the hairbrush as desired to control mouse movements.
6. Use the DPI button on the hairbrush to adjust the sensitivity of the mouse cursor (800-1200cDefault-1600).
7. Press the forward button or backward button on the hairbrush for navigation purposes.
8. The hairbrush will automatically stop working after 10 minutes of inactivity to preserve battery life.
9. To turn off the hairbrush and keyskin, set the power switch to “OFF”.
10. If you encounter any interference or connectivity issues, try reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, or connecting the equipment to a different outlet on a separate circuit.
11. Do not make any changes or modifications to the product that are not expressly approved by the manufacturer as it may void the user’s authority to operate the equipment.

Note : This device complies with Part 15 of the FCC Rules and should not cause harmful interference. It is designed to accept any interference received, including interference that may cause undesired operation.

Thank you very much for purchasing this keyboard and mouse combo, please read this user manual carefully to ensure your new keyboard and mouse combo functions correctly.

Package Contents

• 1 x Wireless Keyboard and keyskin
• 1 x Wireless Mouse
• 1 × 2.4G USB Receiver
• 1 x User Manual
• 1 x Hairbrush

Specification of Keyboard

• Defne the name Instructions
• Operate system Windows 7 end above
• Power supply Dry cell 2*AAA
• Sleep time 5S aner stop using keyboard
• Key life 3 million strokes
• Standby time 40 days
• Continuous working Ume 300 hours of continuous use
• Wakeup way Click any key
• Dimensions 432130.219.4 MM
• Operating distance Within 8 meters
• Low voltage 1 second 1 flash
• Working current Open the Caps locks 3 MA
• Sleep current: 0.02MA

Specification of Mouse

Product Layout

Product indictors

1. Caps Lock Indicator: Green indicator light is on when the Caps Lock is activated.
2. Number Lock Indicator: Green indicator light is on when the Number Lock is activated.
3. Keyboard battery status indicator When keyboard is turned on, battery status indicator lights up red for 3 seconds, then turns off.
4. Blinking red: Battery is low. Please replace the dry battery in time.
5. Power Switch: Slide to the right to turn on the keyboard and slide to left to turn off.
6. Turn the switch up and turn the mouse on, Turn the switch down and turn the mouse on.
7. Power supply: Open the battery cover and load the dry battery.
8. USB Receiver: USB Receiver slot. Open the keyboard battery cover and see the receiver slot.

Keys and Function

System Requirements

Windows 7 or above, Windows with USB port (for the USB receiver).

Connection Steps

• Step 1. Set power switches of the keyboard and mouse to “On”
• Step 2. Connect the USB receiver to the computer.

Keyboard Features

1. USB nano receiver is in the battery compartment of the keyboard, under the battery cover.
2. Plug and play.
3. Portable.
4. Enhanced scissor keys, more sensitive and durable.
5. Slim spill-resistant design with low profile keys for a comfortable typing experience.

FCC

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equIpment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>