TRENDnet TEG-S591 9-Port Multi-Gig Switch Owner’s Manual
- June 1, 2024
- TRENDnet
Table of Contents
TRENDnet TEG-S591 9-Port Multi-Gig Switch
Specifications
- Model: TEG-S591
- Type: 9-Port Multi-Gig Switch
- 10G Port: 1 port for high-speed network connection
- 2.5G Ports: 8 ports for multi-gigabit speeds
- Fanless design: Lowers power consumption and eliminates operating noise
- Wall Mountable: Yes
- Jumbo Frame Support: Yes, up to 12KB
- LED Indicators: Yes
Installation
No configuration is needed for the TEG-S591 switch. Follow these steps for
installation:
- Choose a suitable location for the switch.
- Connect the power adapter to the switch and plug it into a power source.
- Connect network devices to the 2.5G or 10G ports using Ethernet cables.
- Power on the switch.
Wall Mounting
If you prefer to wall-mount the switch for installation flexibility, follow
these steps:
- Locate the desired wall location for the mounting.
- Use appropriate screws and anchors to securely mount the switch on the wall.
- Ensure the switch is mounted at a convenient height for easy access.
LED Indicators
The LED indicators on the switch convey port status. Here’s what they
typically indicate:
- Solid green: The Port is connected and operating normally.
- Blinking green: Data is being transmitted through the port.
- Off: No device is connected to the port.
Using Jumbo Frames
If you want to utilize Jumbo Frames for increased performance, follow these
general steps:
- Access the switch’s configuration interface (if
- applicable).
- Enable Jumbo Frames support.
- Configure the desired frame size, up to 12KB.
Frequently Asked Questions (FAQ)
- Does the TEG-S591 switch support PoE (Power over Ethernet) functionality?
No, the TEG-S591 switch does not support PoE. It operates as a standard multi- gigabit switch without PoE capabilities.
9-Port Multi-Gig Switch
TEG-S591 (v1.0R)
- 8 x 2.5G RJ-45 ports
- 1 x 10G RJ-45 port
- Compact fanless design eliminates noise
- Wall mountable for installation flexibility
- 60Gbps switching capacity
- IEEE 802.3bz (2.5G) compliant
- IEEE 802.3an (10G) compliant
- Lifetime Warranty
Expand your network’s bandwidth and reduce traffic bottlenecks with TRENDnet’s high-speed and reliable Multi-Gigabit Switch. This multi-gig 2.5G / 10G switch comes equipped with 2.5G RJ-45 ports that provide speeds capable of up to 2.5Gbps over existing Cat5e or better cabling. It also offers one dedicated 10G RJ-45 port for an ultra-fast network connection, providing a cost- effective solution in adding 10G link capability to any SMB network. The fanless design on this multi-gigabit 2.5G / 10G switch lowers energy consumption and eliminates distracting operating noise. TRENDnet’s reliable multi-gigabit switches are cost-effective solutions to increase your network’s throughput.
10G Port
Offers one 10G port for high-speed network connection providing a cost-
effective solution in adding 10G link capability.
2.5G Ports
Equipped with eight 2.5G RJ-45 ports that provide multi-gigabit speeds capable
of up to 2.5Gbps over existing Cat5e or better cabling.
Fanless
The compact fanless design lowers power consumption, energy costs, and
eliminates distracting operating noise.
NETWORKING SOLUTION
FEATURES
-
Easy Installation
No configuration needed, simply connect network devices to this multi-gigabit 2.5G / 10G switch -
2.5G Ports
Equipped with 2.5G RJ-45 ports that provide higher gigabit speeds capable of up to 2.5Gbps over existing Cat5e or better cabling -
10G Port
Equipped with one 10G port for an ultra-fast network connection providing a cost-effective solution in adding 10G link capability -
Fanless
Compact fanless design on the 2.5G / 10G switch lowers energy consumption and eliminates operating noise
Housing Design
The multi-gigabit 2.5G / 10G switch features a sturdy metal housing -
Wall Mountable
Features a convenient wall mountable design for greater installation flexibility -
Jumbo Frame
The 2.5Gb switch sends larger packets, or Jumbo Frames (up to 12KB), for increased performance -
LED Indicators
LED indicators on the multi-gigabit 2.5G / 10G switch conveys port status
SPECIFICATIONS
Standards
- IEEE 802.3ab
- IEEE 802.3an
- IEEE 802.3bz
- IEEE 802.3u
- IEEE 802.3x
Device Interface
- 8 x 2.5G RJ-45 ports (1Gbps/2.5Gbps)
- 1 x 10G RJ-45 port (1Gbps/10Gbps)
- LED indicators
- Wall mountable
Data Transfer Rate
- Gigabit Ethernet: 2Gbps (full duplex)
- 2.5G Ethernet: 5Gbps (full duplex)
- 10G Ethernet: 20Gbps (full duplex)
Performance
- Switch fabric: 60Gbps
- RAM buffer: 1MB
- MAC address table: 4K entries
- Jumbo frames: 12KB
- Forwarding mode: Store and forward
- Forwarding rate: 44.64Mpps (64-byte packet size)
Power
- Input: 90 – 264V AC, 47/63 Hz
- Output: 12V, 1.5A
- Max. consumption: 11.9W
MTBF
- 518,151 hours
- Fan / Acoustics
- Fanless
Operating Temperature
- 0° – 40° C (32° – 104° F)
Operating Humidity
- Max. 90% non-condensing
Dimensions
- 240 x 105 x 27mm (9.45 x 4.1 x 1 in.)
Weight
- 0.72 kg (1.6 lbs.)
Certifications
- CE
- FCC
- LVD
Warranty
- Lifetime Warranty
Package Contents
- TEG-S591
- Quick Installation Guide
- Power adapter (12V, 1A)
All references to speed are for comparison purposes only. Product
specifications, size, and shape are subject to change without notice, and
actual product appearance may differ from that depicted herein.
TRENDnet offers a lifetime warranty for all of its metal-enclosed network
switches that have been purchased in the United States/Canada on or after
1/1/2015. Cooling fan and internal power supply carry a one-year warranty.
20675 Manhattan Place Torrance CA 90501 USA T:
1-888-326-6061
sales@trendnet.com
www.TRENDnet.com
TRENDnet is a registered trademark. Other Brands and product names are
trademarks of their respective holders. Information provided in this document
pertain to TRENDnet products and is subject to change at any time, without
notice. For the most recent product information please visit
http://www.trendnet.com Copyright © TRENDnet. All
Rights Reserved.
Updated: 1/10/2024
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>