SENQUIP QUADC2A Programmable Telemetry Devices User Guide
- June 1, 2024
- SENQUIP
Table of Contents
SENQUIP QUADC2A Programmable Telemetry Devices
Specifications
- Release Date: Jan 24, 2024
- Power Supply: Permanent power and internal rechargeable battery
- Internal Sensors: Light sensor, Accelerometer, Pressure sensor, Magnetic switch, Temperature sensor, GPS, Bluetooth interface
| Feature | Description |
|---|---|
| Built-in Sensors | Supply voltage, battery voltage, time, position, speed, |
ambient temperature, pitch, roll, pressure
Interfaces| RS232, RS485, MODBUS, CAN bus, Bluetooth, 4-20mA, pulse,
frequency, voltage
Transmission| Wi-Fi, 4G LTE
Power Supply| Solar panel, 10V to 75V DC
Product Usage Instructions
Getting Started
- Opening the Box: Carefully open the packaging to retrieve the Senquip QUAD.
- Mounting: Securely mount the device in a suitable location as per the provided guidelines.
- User Access: Follow the user access instructions to set up user permissions and accounts.
- Anti Tamper Screw: Use the anti-tamper screw to secure the device in place.
- SIM Card Install: Insert a SIM card into the designated slot following the provided instructions.
- Wiring Guide: Refer to the wiring guide for proper connection of cables.
- Fitting the Antenna: Attach the antenna to ensure proper signal reception.
- Initial Setup: Proceed with the initial setup process as outlined in the manual.
Power Supply
- Permanent Power: Connect the device to a permanent power source for continuous operation.
- Internal Rechargeable Battery: Utilize the internal rechargeable battery as a backup power source.
- Power Consumption: Monitor power consumption to optimize device performance.
- Freight Mode: Activate freight mode when shipping or transporting the device.
General Setup
- Measurement and Transmit Intervals: Configure measurement and transmit intervals according to your requirements.
- Power Supply: Ensure proper power supply connections for reliable operation.
- Settings: Adjust settings as needed for optimal performance.
Internal Sensors
- The Senquip QUAD is equipped with various internal sensors including light sensor, accelerometer, pressure sensor, magnetic switch, temperature sensor, GPS, and Bluetooth interface.
- Internal Sensor Settings: Customize sensor settings to suit your monitoring needs.
Chapter 1: Introduction
What is the Senquip QUAD
Senquip manufactures rugged, programmable telemetry devices that connect to
industrial sensors and systems, and send the data measured to the Senquip
Portal or a server of your choice. The Senquip QUAD is designed for
applications where the telemetry device needs to be hidden, is in a metal
enclosure, and so needs external antennas. Built-in sensors allow measurement
of supply voltage, battery voltage, time, position, speed, ambient
temperature, pitch, roll, and pressure. Interfaces are provided for RS232,
RS485, MODBUS, CAN bus, Bluetooth, 4-20mA, pulse, frequency, and voltage. Data
measured by the Senquip QUAD is transmitted to the internet via Wi-Fi or 4G
LTE and can be delivered to the Senquip Portal or to your own server or SCADA
system. Power to the Senquip QUAD can be supplied by a solar panel, or with
10V to 75V DC. If a solar panel is used, an internal LiPo battery will keep
the device powered during periods without sunlight.
Who can use the Senquip QUAD
The extensive array of in-built sensors, ability to interface to any
industrial sensor or system, programmability, versatile power supply, and
rugged enclosure mean that the Senquip QUAD can be used in a wide variety of
applications across many industries. Typical applications are found in Mining,
Water Services, Fleet, Smart Cities, Environment, Emergency Services,
Industrial Installations, Agriculture, Aquaculture, and Health Services.
You can rely on the Senquip QUAD
The Senquip QUAD has been designed from the ground up to offer a reliable,
capable, flexible, and secure remote monitoring platform for industrial users.
With a focus on reliability, capability, flexibility, security, and ownership,
the Senquip QUAD aims to provide a superior user experience and cost-effective
data delivery solution for various industrial environments.
FAQ
What is the Senquip QUAD?
It is a rugged, programmable telemetry device designed for industrial applications requiring remote data collection and transmission.Who can use the Senquip QUAD?
The device can be used across a variety of industries for monitoring and data collection purposes.How does the Senquip QUAD transmit data?
Data is transmitted to the internet via Wi-Fi or 4G LTE, and can be sent to the Senquip Portal or custom servers.What power sources are compatible with the Senquip QUAD?
The device can be powered by a solar panel or with a direct current supply ranging from 10V to 75V DC.Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>