alza guard AGD-BTH01x Bluetooth Tag User Manual

AGD-BTH01x Bluetooth Tag
User Manual

THANK YOU FOR CHOOSING US

We value your trust. We hope that you will be happy with our product, and as excited about it as we are. We try to offer products of the highest quality that satisfy even the  most demanding requirements. If you are satisfied, it would make us very happy if you chose us again the next time you make a purchase.
We are environmentally conscious, therefore we use special eco-friendly packaging. Please recycle!

Recycling and Environmental Protection
We try to avoid using plastic packaging and film and only use them when they are absolutely necessary to protect the product. So how are we different?

Packaging you can eat… Well, almost.

We use ink made from soybeans as opposed to classic petroleum-based ink.
The majority of our packaging is made from 100% recyclable paper.
We limit the use of adhesives,
If absolutely necessary, we make sure to choose only water-soluble ones

We think globally, which means that we actively search for eco-friendly solutions. We keep an eye on trending technology and place findings of the scientific community into  practice.
We don’t just try to meet quotas and mandates, we aim to exceed them.

TECHNICAL PARAMETERS

IP66 indicates the degree of protection against dust, against the danger of contact with any tool and protection against any intense jet of water (in all angles, flow 100 I/min,  pressure 100 kN/m² for 3 minutes).

INSTRUCTIONS

Battery insertion/replacement

1. Loosen the back cover screw.
2. Insert a coin into the hole in the back cover and turn counter-clockwise to release the back cover. Remove it carefully.
3. Insert a new CR2032 type battery. When inserting, pay attention to the correct polarity, which is marked on the bottom of the battery compartment.
4. Replace the cover, insert a coin into the hole in the back cover and turn clockwise to lock the cover.
5. Secure with a screw.
   When replacing, proceed in the same way, but remove the dead battery first.

Adding to the list of devices
Before pairing and adding to the list of devices, make sure your iOS device (iPhone, iPad, etc.) is connected to Wi-Fi and Bluetooth is turned on.

1. Open the “Find My” app.
2. Click the “+” icon and then select “Add another device”.
3. A screen will appear with a search for available devices.
4. Select “AlzaGuard Hero Tag” from the list of found devices.
5. Click next step and follow the in-app instructions when the device is added to the list.

Note:

1. If the device fails to pair within 10 minutes, the device will stop transmitting the Bluetooth signal to save battery. In this case, you need to start the pairing process again
2. If the pairing is interrupted, such as by an incoming call, a network problem or switching to another page, you need to start the pairing process again.
3. If you change your iOS device (iPhone, iPad, etc.), you must first remove the Bluetooth Tag from the original device before pairing with the new device

Lost device mode
You can switch the Bluetooth Tag to lost device mode. If it is then registered by another device that is connected to the network, it will automatically notify the user, or it is  possible to set the contact details of the owner to be displayed to Find Myer.

1. Click on AlzaGuard hero Tag in the “Find My” application.
2. Click “Mark as lost” on the details screen.
3. Click “Continue” and on the next screen you can mark a Found alert, insert your phone contact or leave a message.
4. Click “Activate” in the upper right corner and the lost device mode will be in operation.

Navigation to Find My the item you are looking for
The application displays a map where the item you are looking for is located

1. In the “Find My” app, click “Directions”.
2. A map will appear showing the location of the item you are looking for and ways to get there. Select a means of transport from the menu and click “Start”. The arrow on  the map will navigate you directly to the item you are looking for.

Searching for an item using an audio alert
This method of searching is ideal for items that you know are somewhere around you, such as keys, but can’t Find My them at the moment. After sending a signal from the  application, the device will sound an alert

1. Click “Play Sound” in the “Find My” app
2. The Bluetooth Tag will emit an audio alert.

Find Mying a lost item
If you Find My a lost item that is equipped with an Alza Guard Hero Tag, you can notify its owner that it has been found.

1. Click “Report Found” in the “Find My” app.
2. The search will start
3. Select the found device from the found list and click “Continue”
4. Follow the instructions in the app to notify the owner of the Find My, leave a message contact the owner, depending on the settings the owner has made

SAFETY INFORMATION

• Read the safety and operating instructions. Failure to observe the safety and operating instructions can endanger people or damage the device.
• This product is not a toy. The product contains small parts that could be swallowed by children, so it is important to keep it out of their reach, especially of children under 3 years of age.
• Children must not use the product.
• Use the product only for the purposes for which it is intended.
• Keep this product away from heat sources such as stoves or direct sunlight. No naked flame sources, such as lighted candles, should be placed on the product.
• Do not place containers filled with water, such as vases, on the product.
• Do not expose the product to extreme temperatures (above 60 °C) or dirt.
• Do not immerse the product in water or other liquids or throw it into a fire.
• Do not use or store the product near materials / objects that could ignite, flammable or explosive substances, etc.
• Do not short-circuit, disassemble or otherwise mechanically damage the product.
• Avoid overloading the product.
• Do not place any objects on the product. It is at risk of irreversible damage.
• This product does not contain parts repairable by the user . In the event of a malfunction or defect contact the nearest authorized service center. Check the product regularly for damage. It is prohibited to use a damaged product.
• If you are not going to use the product for a long time, remove the battery from it to avoid damage in case of electrolyte leakage.
• Use only a clean and dry cloth for cleaning. Do not use any chemical cleaners, abrasives, gasoline, thinners or other similar substances. Make sure the battery is removed prior to
• Store the product in a dry and well-ventilated place. Do not place any objects on it during

The company Alza.cz, a. s. hereby declares that the type of radio device AGD- BTH01 x complies with Directive 2014/53/EU.

DISPOSAL OF USED BATTERIES
Batteries contain materials harmful to the environment. Therefore, do not dispose of batteries in regular municipal waste. Dispose of used batteries properly at collection  points.

www.alzaguard.com

Co. Reg. No. 27082440
Alza.cz a.s., Jankovcova 1522/53,
170 00 Prague 7, Czech Republic
© 2022 Alza.cz a.s. All Rights Reserved.

To use the Apple Find My app to locate this item, the latest version of iOS, iPadOS, or macOS is recommended. The Find Items app on Apple Watch requires the latest  version of watchOS.
Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the  product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this  product or its compliance with safety and regulatory standards.
Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, iPod touch, Mac, macOS and watchOS are trademarks of Apple Inc. |OS is a trademark of Cisco and is used  under license.

References

• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.cz

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>