Ronix RH-9501G Laser Level User Manual
- June 1, 2024
- Ronix
Table of Contents
Ronix RH-9501G Laser Level User Manual
SPECIFACATION
| Model | RH-9501G |
|---|---|
| Accuracy | ±2mm@5m |
| Leveling Range | ±3° |
| Working Range/With Detector | 10m/50m (Working with laser receiver) |
| Tripod Thread | 1/4″ |
| Laser Color | Green |
| Laser Type | 515nm, laser class II |
| Line Width | 2mm@10m |
| Operating Temperature | -10°C to 45°C |
| Storage Temperature | -20°C to 60°C |
| Dimension | 65x65x65/mm3 |
| Continuous Working Time (All Diodes) | ≥ 5hour |
| Resistance | IP54 |
| Power Supply | 3xAAA Alkaline battery |
| Net Weight | 0.23Kg |
| Supplied in | BAG |
| Include | FRJ300A Bracket |
PARTS LIST
Please read this instruction manual before first use
OPERATING THE UNIT
PENDULUM LOCK
The 1V1H Red beam laser level is a precision instrument and should be
treated with care. When not in use, the pendulum should always be in the Off
position. Locking the pendulum allows the Cross Line Laser to better withstand
vibration and trauma incurred during transportation or if the unit is dropped.
LOCKED LINE ANGLE
In the locked line angel position, the pendulum is in the locked position and
will not automatically level. When in the locked line position, both two laser
lines will be on and flash slowly. The Red Lock LED will be on as well.
AUTOMATIC LEVELING
When the pendulum is free to automatically level, In order for the Cross Line
Laser to automatically level, the base of the unit needs to be within 3˚ of
level.
When the pendulum is unlocked and the Cross Line Laser is within 3˚ of level,
the unit will be in automatic leveling range, in this situation no LED light
will be on. Should the base of the unit be outside the 3˚ leveling range the
laser beam will flash meanwhile an audibly warning will be sent out from Cross
Line Laser.
LOW BATTERY ALARM
The Green battery LED will be on and keep flashing slowly when the working
voltage of laser is below 3V. At this situation the batteries are required to
be replaced.
