ShenZhen RiShengHua Technology Co Ltd RSH-WL08 Water Leak Detector User Manual
- June 1, 2024
- ShenZhen RiShengHua Technology Co Ltd
Table of Contents
**ShenZhen RiShengHua Technology Co Ltd RSH-WL08 Water Leak Detector User Manual
**
Product Description
Network Setting
Power on the product.
Insert a thin blade or coin to the slot on the battery cover and rotate it anticlockwise to open.
Remove the battery insulation film to power on the product and close the battery cover.
Press the reset button for 5S and release, the blue LED will flash for network setting
Distribetion network hint:
Press and hold for 5 seconds until the indicator light flashes and the product
enters distribution mode. The distribution network timeout is 30 seconds. If
it exceeds 30 seconds and the product is still not connected to the phone, the
product will exit the distribution mode.
Installation Instructions
Place the product in a fixed position in the detection area (it is recommended
not to move it randomly to avoid affecting the monitoring Place the product in
a fixed position in the results in this area).
Bottom view
Technical Parameters
| Wireless Technology | ZigBee |
|---|---|
| Working Voltage | DC 3 V (CR2032 battery) |
| Transmission Frequency | 2.4 GHz |
| Working Temperature | 0°C to +55°C |
| Low battery indication | Yes |
| Battery Life | Normal environment more than 6 months (specific use time and |
alarm frequency related)
Detection Method| Water sensor probe
Water proof level| IP54
Dimensions| (1)484813.5mm
Toxic or Hazardous Substances or Elements of this Product
| ComponentName | Toxic or Hazardous Substances or Elements |
|---|---|
| Lead (Pb) | Mercury (Hg) |
| (Cd) | Hexavalent chromium (Cr (VI)) |
Polybrominated diphenyl ethers (PBDEs)
LED| 0| 0| 0| 0| 0| 0
PCB| 0| 0| 0| 0| 0| 0
Cover and other components| 0| 0| 0| 0| 0| 0
This table complies with SJ/T 11364.
Ο: indicates that the toxic or hazardous substance amount contained in
all homogeneous materials of a component does not exceed that stipulated in
GB/T 26572.
X : indicates that the toxic or hazardous substance amount contained in
at least one of the homogeneous materials of a component exceeds that
stipulated in GB/T 26572.
Warranty Certificate
Warranty policy:
- If the product has quality problems within 7 days of the payment date, you can apply for a refund based on the invoice price or to replace with the same model or have it repaired..
- If the product has quality problems within 15 days of the payment date, you can apply to replace the product with he same model or have it repaired.
- If the product has quality problems within 12 months of the payment date, you can apply to have it repaired.
What is not covered under this warranty:
- The product owner has no warranty certificate or the warranty service has expired.
- Damage caused by improper use, maintenance, or storage
- Damage caused by disassembly and repair without Tuya’s authorization
- Damage caused by force majeure
- Normal discoloration and depreciation after the product has been used
User Form
User information (Specify real information. Tuya promises to use the
information only for after-sales services.)
Name____
Phone number
Email____
Zip code____
Address_
Product information
Name Model____
Color Product SN___
Service Return Replace Repair_
Fault symptoms___
Handling date_____
Maintenance personnel signature____
Warning:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user ’s authority to operate the
equipment.
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body