TECH WHALENTUNED 2017 Charge Tube and BOV Kit Installation Guide

TECH WHALENTUNED 2017 Charge Tube and BOV Kit

2017+ Can-aM Maverick x3 turbo charge tube and blow off valve kit Installation gudie

WHALEN’S SPEED RESEARCH AND DEVELOPMENT

• Remove the OEM charge tube to throttle body adapter coupler.

• Remove the Map sensor from the adapter, you’ll need to reinstall this.

• Install the aluminum vacuum barb adapter into the factory spot on the intake manifold.

  • T30-Torx headed bolt
    
    

• Our charge tube installs directly to the throttle body, as shown below.
  
  

• 2021 Can am X3 Turbo RR Shown | Rear mounted radiator | Installation Example
  

Customer Support

WHALEN’S SPEED RESEARCH AND DEVELOPMENT 269.415.0040 | Tech@whalentuned.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>