SUOTU G2 MAX Electric Scooter User Manual
- June 1, 2024
- SUOTU
Table of Contents
G2 MAX
OPERATION MANUAL
G2 MAX Electric Scooter
Language
- English
- French
- German
- Italian
- Spanish
- Polish
Warning
It is important to have a thorough understanding of your new electric scooter
so that you can achieve the best performance, comfort, fun, and safety while
cycling. To understand the new scooter and its correct operation, you should
first carefully read the manual.
It is important to ride for the first time in a safe and controlled manner.
For example, stay away from cars, obstacles, and other riders. It should be
prohibited to enter highways, motor vehicle lanes, public lanes, reverse
traffic, and avoid cycling in the rain. When encountering waterlogged roads,
you should slow down and detour.
Scooters are vehicles with certain risks. Do not use mobile phones or wear
headphones while cycling. It is necessary to understand the traffic rules for
riding electric scooters on local public roads. When you ride every time, you
should follow the rules. For your own safety, don’t forget to wear a
qualified helmet before getting on the scooter. It is recommended to use
protective equipment such as elbow and knee pads to provide better protection.
When electric scooters are supplied, there is no basic mandatory equipment,
and the situation may vary in different regions. Therefore, if you plan to use
electric scooters on public roads, it is necessary to equip electric scooters
with basic mandatory equipment in accordance with relevant laws and
regulations.
This product is designed specifically for your personal use. Do not use it for
commercial or other purposes.
Please keep this manual properly for reference.
Caution
Before cycling, the tire pressure should be checked, the handlebars should be
installed correctly and securely.Please ensure that the battery is fully
charged. If the battery is low during cycling, please keep the vehicle moving
slowly and steadily. Charging should be done as soon as possible.
Before each charging, please check the charger, cables, and plugs. If there is
any damage, do not use a charger.
When braking on slippery roads, the braking distance is usually longer than on
dry roads. Therefore, it is necessary to brake earlier to park more safely.
You should try to avoid using electric scooters on rainy, stormy, or snowy
days. If electrical components (control units, engines, and batteries) become
damp or submerged, irreversible damage can occur, even leading to battery
explosion.
This product can only be used by one adult at a time. Do not carry any
additional passengers. If you feel uncomfortable or under the influence of
alcohol or drugs, please do not ride a scooter.
The vehicle is not a toy. Like other vehicles, there is a possibility of
falling, colliding, or encountering other dangerous situations. Please do not
provide your electric scooter to anyone who does not know how to use it
correctly. If you allow others to ride your scooter, it is your
responsibility to ensure that all riders are aware of all warnings,
precautions, instructions, and safety precautions, and to ensure that they are
able to use this product safely and responsibly, and to protect themselves and
others from harm.
Electric scooters should be kept away from flammable materials and open
flames.
Sketch map
Argument list
Product name|
---|---
Size| Folded size| 1260605580 mm
Unfolded size| 12606051300 mm
Parameters| Maximum speed| ≤ 55 km/h
Medium-speed endurance| ≤ 70 km
Maximum slope| ≤ 22°
Tires| 10 inch off-road tires
Shock-absorbing| Spring suspension
Waterproof| IP54
Brakes| Front and rear disc brakes
Display device| Speed, mileage, battery level, front light, etc.
Lighting| LED
Battery data| Input voltage| 100~240V/50~60Hz
Voltage/Capacity| 48V/20.8Ah
Charging time| 54.6V/2A chargers, charging takes about 10 hours.
Maximum load| Maximum load| 150 kg
Weight| Net weight| About 31 kg
Packing list
Please carefully check for any loss or damage. If so, please contact us promptly.
Assembly guidelines
Unpacking and assembly
-
Turn the knob to secure the folding switch.
-
Put the handle tube into the fixed seat.
-
Tighten the screws and check the power switch.
Fold and unfold
-
Drop the hook and pull the standing bar.
-
Pull up the upright pole.
-
Turn the knob to lock the folding clip.
Maintenance
Lubricating oil: Every six months, a small amount of white lubricating grease
or lubricant needs to be added to the folded area for maintenance.The scooter
should be inspected every three months to see if any screws are loose. If any
are loose, please tighten them.
Battery: When the scooter is charging or not in use, please turn off the
power. When it is not in use for a long time, the electric scooter should be
placed in a safe location and charged at least once every 3 months.
Storage: Please do not leave the scooter in scorching sun or other severely
humid areas for a long time.
Please keep the scooter clean.
Operation instruction
- Long press the power button to turn it on/off.
- Short press the power button once to switch gears. There are three levels.
- Press the power button three times in a row to enter the menu setting interface. The instrument panel will display
P01, P02, P03, P04, P05, P06, P07, P08, PA, PB.
P01: Kilometer/mile selection settings, (default is kilometers).
P02: Voltage level setting, 36V/48V/52V/60V/72V (default value is 48V).
P03: The unit of wheel diameter is inch, which can be set to 080-160 (default
is 100).
P04: Speed measurement magnetic pole range: 1-100, (default is 30).
P05: Cruise selection, 0 is no cruise, 1 is cruise, (default is no cruise).
P06: Zero start/non zero start settings, 0 is zero start, 1 is non zero start,
(default is zero start).
P07: Speed limit setting: range 0-100 percentage speed limit; (default 100).
P08: For the setting of sleep time, 0 is not sleep, and other numbers are
sleep time, (default is 5 minutes).
PA: Starting force setting, 1-5, 1 minimum, 5 maximum.
PB: For the braking force setting, it is from 0-5, 0 is turned off, and the
braking force of 1-5 gradually increases.
Troubleshooting
| Malfunction | Code | Solutions |
|---|---|---|
| Rear motor malfunction | E001 | Retry after replacing the rear motor/controller. |
| Throttle malfunction | E002 | Retry after replacing the throttle. |
| Controller malfunction | E003 | Retry after replacing the controller. |
| Under-voltage | E005 | Low battery level, recharge and retry. |
| Instrument malfunction | E006 | Retry after replacing the instrument/controller. |
| Instrument malfunction | E007 | Retry after replacing the instrument/controller. |
Charging
Friendly reminder: When charging, the charger indicator light is red; it turns green when fully charged.
Warranty
From the date of receipt to the warranty period, if this product occurs
malfunctions or is damaged,it can be repaired, exchanged, or returned for free
after being tested and confirmed by the KuKirin after-sales center.
When applying, please contact the product seller and follow the instructions.
At that time, you need to provide accurate, complete, and valid purchase
information or invoices.
| Warranty content | Warranty period |
|---|---|
| Controller, instrument, motor, lithium battery, charger. | Half a year |
Frame, front body, rear wheel hub, brakes, folding, body lever, front fork, brake system, throttle dial, etc.| 1 year