SystemRoMedic 5082 Standing TurnTable User Manual
- June 1, 2024
- SystemRoMedic
Table of Contents
User manual
Manual no: 808 Ver. 11 150730
SWL: 135-250 kg/300-550 lbs
5082 5083
5084 5085
5082 Standing Turn Table
The Turn Table can be used for seated transfers between wheelchair and bed, toilet or chair/armchair. For increased security, the Turn Table can be be used together with Flexi Belt/ Easy Belt. Turn Table is available in three sizes with addles or without handle for tight spaces.
Check Safety
Visual inspection
Check the condition and function of the assistive device regularly. Check to
ensure that fabric is not worn or faded. If there are signs of wear, the
product must be discarded.
Special requirements and conditions
To transfer with Turn Table, the patient must be able to:
- support weight while standing
- stand up and maintain balance (with support)
- understand instructions
Placement and use TurnTable
Place the TurnTable on the floor beside the user. Secure the TurnTable in place, before raising the user, by placing the ball of your foot on the TurnTable and your heel on the floor. Steer the TurnTable by pushing with the front of the foot and braking with the heel. When the user is about to sit down, secure the TurnTable in place as described above.
When transferring from bed to wheelchair, place the wheelchair close to the bed, so as to minimize transfer distance.
When transferring to the toilet, place the wheelchair close to the toilet, so
as to minimize transfer distance. Pull the user’s pants up/down when the user
has risen slightly from the seat.
Preferably, two caregivers should assist.
Care of the product
Clean TurnTable with pressurized air or water. If necessary, disinfect with 70% alcohol. Teflon spray or a similar product can be used to lubricate between the plates so that they glide easily against each other.
Simple solutions for great results
System RoMedic™ is the name of Handicare’s unique easy transfer concept, the market’s widest and most comprehensive range of clever, easy-to-use and safe transfer and lifting aids designed to make life easier, both for the user and for the caregiver. SystemRoMedic™ is a complete solution that provides for the majority of patient transfer or manual handling requirements. From the simplest to the most complex scenarios, from the lightest to the heaviest. The concept encompasses assistive devices for four different categories of transfers:
- Transfer, assistive devices for manual transfers of users between two locations.
- Positioning, assistive devices for manual repositioning of users within the same location.
- Support, assistive devices for mobility support e.g., during sit-to-stand or gait training.
- Lifting, assistive devices for manual and mechanical lifting of users.
Improved work environment, improved quality of care and cost savings
The philosophy behind System Ro Medic™ is focused on the prevention and
reduction of occupational injuries while allowing users to experience a
greater sense of independence and dignity. Through a unique combination of
training and a complete range of efficient transfer aids, System Ro Medic™
offers improvement of both work environment and quality of care and, at the
same time, achieves significant cost savings.
Handicare offers solutions and support to increase the independence of
disabled or elderly people as well as to improve the convenience of those who
are caring for them.
The Handicare Group is one of the leading healthcare companies in Europe with
its own manufacturing organizations and sales companies in Norway, Sweden,
Denmark, Germany, the Netherlands, Great Britain, France, China, Canada and
the USA. Handicare’s products are also distributed by partners in more than 40
countries worldwide. Our wide range of high-quality products includes various
manual and power wheelchairs, seating systems, scooters, a complete easy
transfer system and other patient handling aids, stairlifts, car adaptations,
rise and recline chairs, and bathing and toileting products.
Handicare AB is quality and environmentcertified in accordance with ISO 9001, ISO14001 and ISO 3485.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>