Shenzhen Lanyao Technology Co Ltd BT-FAAH Wireless Sleep Mask User Manual
- June 1, 2024
- Shenzhen Lanyao Technology Co Ltd
Table of Contents
Shenzhen Lanyao Technology Co Ltd BT-FAAH Wireless Sleep Mask
Product Information
Specifications
| Feature | Description |
|---|---|
| Model | BT-FAAH |
- List of products: 1 eye mask, 1 instruction sheet, 1 charging line.
- Charging time: 2-2.5 hours for a complete charge, life lasted about 8 hours.
- How to connect:
- Long press the boot that says “di” from the state of shutdown, blue light long lit.
- Open the phone Bluetooth search and click the “BT-FAAH” connect to play.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
FAQ
-
How long does it take to charge the Wireless Sleep Mask?
It takes 2-2.5 hours to fully charge, with a battery life of approximately 8 hours. -
How do I connect the Wireless Sleep Mask to my phone?
Long press the power button until you hear “di” and the blue light remains on, then open your phone’s Bluetooth search and click “BT-FAAH” to connect and play. -
What should I do if there’s interference with my device?
This device is in compliance with FCC Rules. However, if interference occurs, ensure that no unauthorized modifications have been made to the equipment as it could void the user’s authority to operate the equipment.
FEATURE
WHAT’S INCLUDE
List of products:
- 1 eye mask
- 1 instruction sheet
- 1 charging line
CHARGING
Charging time: 2-2.5 hours of general charge, full playable up to about 8 hours
FUNCTION
- Long press boot/shutdown; Short press play/pause.
- Long press volume +, short press one.
- Long press volume -, short press one.
How to connect
- Press the boot button for a long time, and the grid above the button will alternate red and blue.
- Turn on Wireless and search for “BT-FAAH”.
- Click on the “BT-FAAH” connection to play music!
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not
expressly approved by the party responsible for compliance. such modifications
could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirements. This
equipment complies with FCC’s RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna(s) must not be co-
located or in conjunction with any other antenna or transmitter.