BSSB BWR132B-A1 / WCB006-A1 Wireless Bed Remote User Manual
- June 1, 2024
- BSSB
Table of Contents
BSSB BWR132B-A1 / WCB006-A1 Wireless Bed Remote User Manual
BWR132B-A1 ( WCB006-A1 ) with voice
Manual Instruction
Editor：
Reviewer：
Functions
1. Bed control
Head: Press the button, the head part lift up. If release the button, it will stop.
Press the button, the head part lift down. If release the button, it will stop.
Foot: Press the button, the foot part lift down. If release the button, it will stop.
Press the button, the foot part lift down. If release the button, it will stop.
Massage: When it is turned on, the head massage has a low intensity, and each time it is pressed, it will be cycled through low, medium, high, and off；
When it is turned on, the foot massage has a low intensity, and each time it is pressed, it will be cycled through low, medium, high, and off；
2、 Memory:
When the bed goes to a comfortable position, long press the button for 3s, when the button flashed 3S, the position is successfully memorized.
ZG,TV,READ,SLEEP,4 memory locations；
3、 Reset
Press the button, all motors will be closed. During the operation, if press any button controlling motors, the “reset” will stop.
4、 One key to open the head and feet
Click the button, head part / foot part will lift up automatically. During the operation, if press any button controlling motors, it will stop.
5、 Pause
Press the button, motors will stop working.
Control box model:WCB006-A1,The structure and wiring are as follows：
Voice Module Function
FCC Compliance Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>