nediea N7 Space Heater Portable Electric Heater User Manual

nediea N7 Space Heater Portable Electric Heater

GXZ-N7
Thank you for purchasing our products
Please read the instruction manual carefully before use Please keep the instructions properly

Product Parameters

1. Product name: N7 Heater
2. Model no.: GXZ-N7
3. Material: Fireproof PP/hardware/heating module/PCBA
4. lnput voltage: 95-240V ?
5. Rated frequency: 50/60Hz
6. Rated power: 1000W (±5%)
7. Standby current: 20-40mA (±20%)
8. Protection device: Built-in resettable fuse/anti-rollover protection switch
9. Heating component: PTC ceramic heating module
10. Product size: 201.5160.1120mm
11. Product weight: 795g
12. Executive standard: GB4706.1-2005 GB4706.23-2007
13. lnspection: qualified product
14.  Place of Origin: Shenzhen, China

Product Components

1. Function keys
2. Light button
3. Function indicator light
4. Front grille
5. Rear windshield
6. AC outlet
7. Hand strap
8. overturn protection

Operating Instruction

1. Heating function (power symbol): Turn on the power switch, and then into standby mode, click the power button for the 1st time to tum on low-grade heating, click the power button for the 2nd time, switch to high-grade heating, click the power button for the 3rd time, Turn off the heat.
2. Charcoal fire lighting: (bulb button): Tum on the power switch, and in standby mode, click the Ugh! bulb button for the first time to turn on the simulated charcoal fire, and click the tight bulb button for the second lime to turn off the simulated charcoal fire.
3. Power switch: The main power switch on the back of the machine can control the power on and off of the machine (O-off/ I -on).
4. Rollover protection: When the product rolls over, immediately cut off the power supply and return to the upright state to continue to operate.
5. Built-in fuse: When the product is abnormal and the temperature of the PTC healing module is too high, the built-in thermal fuse win disconnect the power supply and resume use.
6. Cooling function: When an heating functions are turned off, the fan will keep working for 50 seconds and then tum off (to cool down the built-in heater)

LED Light Indicator

1. Power indicator: Tum on the power switch, the power indicator (red) will flash when it is in standby mode, and the power indicator (red) will be on when the heating is working.
2. Gear indicator: In low heating, the indicator light (green) is always on, In high heating, the indicator (yellow) is always on.

Attention

• When using, please check whether the power supply meets the product requirements, and confirm the socket is good and connected to the ground wire The current of the socket must be more than 5A
• The machine must be used on a flat surface. When leans, the protective power-off will be cut out automatically
• If need to move the product, please unplug it and don’t move it before cools down; when moving, do not directly pull the power cord to move the product
• To prevent fire. Do not cover the machine! Do not dry anything on the machine
• When going out or not using this product for a long time, tum it off and unplug it
• Do not use this product near curtains and indoor furniture
• Do not useoutdoorsDo not use or store it in a humid and dusty place for a long time to avoid corrsion of the material or safety accidents such as electric leakage orelectric shock caused by moisture
• When cleaning and maintaining , please unplug it first, and wait for it to cool down
• Strictly prohibited to use it in a flammable and explosive environment; StrictIy prohibited to use it in an environment with serious dust and oil pollution
• Do not use it in bathrooms and swimming pools
• Do not operate the heater button or unplug the power cord with wet hands to prevent electric shock
• Do not use it directly under the power plug, and not directly face the socket or other flammable obiects
• Do not use this heater if it has been dropped; Do not use if there are visible signs of damage to the heater;
• Use this heater on a horizontal and stable surface, or fix it to the wall, as applicable.
• Do not use it again , if the power cord is damaged
• Do not touch the protective net cover to prevent high temperature burns when its working
• Do not allow children under the age of 10 or people with disabilities to usea one
• Do not disassemble the body or modify the product in any form to avoid danger
• It is normal for the product to make a slight noise when the power is tumed on

Waming

1. To avoid overheating, it is forbidden to cover the heater
2. The heater must not be placed directly under the power socket

Product Accessories

• Heater *1,
• Power line *1
• Instructions *1
• Qualified certificate *1

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>