IKEA MITTZON Stand Electric Desk User Manual
- June 1, 2024
- Ikea
Table of Contents
IKEA MITTZON Stand Electric Desk
Product Information
Specifications
- Model : MITTZON
- Input : AC 110V or 230V, 50/60Hz
- Sound level : Lower than 50 dB(A)
- Standby power consumption: Not specified
- Height setting interval : Not specified
- Maximum load : Not specified
- Temperature interval at usage : Not specified
- Temperature interval at storage : Not specified
- Humidity: Not specified
- Power supply unit : Not specified
Product Usage Instructions
Setting Up MITTZON Sit/Stand Desk
- Unbox the MITTZON sit/stand desk components carefully.
- Assemble the desk following the provided assembly instructions.
- Ensure all parts are securely connected and tightened.
Adjusting Height Settings
- Locate the height adjustment controls on the desk.
- Press the up or down button to adjust the desk height as needed.
- Check that the desk is level and stable after adjusting the height.
Maintenance and Care
Regularly clean the desk surface with a damp cloth. Avoid using harsh chemicals that may damage the finish.
FAQ
- Q: What is the maximum load capacity of the MITTZON sit/stand desk?
- A : The maximum load capacity is not specified in the manual. Please refer to the product specifications for details.
- Q: Can MITTZON be used in high-humidity environments?
- A: The humidity tolerance of MITTZON is not provided. It is recommended to avoid exposing the desk to extreme humidity levels.
An electro-mechanical height-adjustable work surface with a control interface to adjust the height up and down. This product can be used by children aged from 14 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved by a person responsible for their safety. Children shall not play with the product. Cleaning and user maintenance shall not be carried out by children without supervision.
Translated from the original instructions.
Advice and instructions for MITTZON sit/stand desk.
Model: MITTZON
- Input : AC 110V or 230V, 50/60Hz
- Sound level : Lower than 50 dB(A)
- Standby power consumption : <0.2W
- Height setting interval: 62~126 cm, 24.4~49.6 in
- Maximum load : 80 kg/176 lbs
- Temperature interval at usage : +5 up to +40 °C/41 up to 104°F
- Temperature interval at storage: -10 up to +50 °C/14 up to 122°F
- Humidity: 20% up to 80% at +30 °C/86°F
- Power supply unit : DC max 30V, 350W
This product shall only be used together with the included power supply unit.
Every person who is responsible for this table at installation or employment
of the table in daily use or in service and repair work should carefully read
these instructions. Keep these instructions close to your sit/stand table.
Installation instructions
The table is assembled according to separate assembly instructions. Connect
one side of the 90-degree connection cable (50mm long) to the M1 port on the
control box, then connect the other side to the cable from the leg. Connect
the cable from the other leg to the M2 port on the control box. Connect the
hand controller to the HS port and the power supply to the AC port on the
control box. The control box should be placed in the tray createdby the frame,
and the electrical cable should be placed in the felt tray on theback.
Position the electrical cable so it does not get damaged. Please check the
assembly instructions. Connect the electrical cable to a wall socket (or a
socket placed in the felt tray).
Note! The electrical cable must have full mobility.
The table is now ready for use. The motors will stop automatically when the
table reaches its lowest or highest position respectively.
Usage of the table
The table shall only be used as a working table with the possibility to
continuously adjust the working height between sitting and standing positions.
The table shall only be used indoors and in dry premises (office environment
or similar).
The table must not be overloaded – the maximum load is 80 kg/176 lbs.
The motors may be run continuously for a maximum of 2 minutes.
Afterwards, the motors must rest for approx. 18 minutes. before they can be used again.
Follow these instructions when adjusting table height:
- Make sure all cables are connected firmly in place.
- Make sure no objects are in the way of the table so that the height can adjust freely.
- Press the up/down buttons on the hand controller to adjust the desk height.
Safety regulations
When the table moves up/down, keep the necessary safety distance to avoid the risk of entrapment between the moving table top and fixed objects in the surrounding area. When the table moves up/down, the user shall keep watch so that nobody is injured or no object is damaged. The table top must not be blocked by a fixed object which may risk that the table overturns. Always remove any office chair before the table moves up/down. The table tripod must not be altered or reconstructed in any way. In service and repairwork of the table, the electrical cable must always be disconnected from the wall socket (the connected socket). Alterations to the control box and hand controller are absolutely forbidden! Alterations to the legs are absolutely forbidden! The table must not be used as a hoisting device for persons. Maintenance and repair instructions
After approx. 1 week of use, check that the screws are properly tightened. If the table cannot be lowered or raised, check the connections between the desk power plug and the wall socket (the socket) and ensure that all cables are connected firmly in place. If any part of the electrical height-adjustable table needs to be replaced, the electrical cable must be first disconnected from the wall socket (the socket). After finishing the replacement, then connect the electrical cable to the wall socket (the socket) and then finish the reset process according to the reset instructions. After resetting successfully without any problems, the table is ready for use. If the table still does not work, please contact your nearest IKEA store or customer service.
Product Servicing
Do not attempt to repair this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks.
Manufacturer: IKEA of Sweden AB
- Address: Box 702, SE-343 81 Älmhult, SWEDEN
- Telephone no.: +46(0)476-648500
SAVE THESE INSTRUCTIONS
The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or landfills and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.
EU Declaration of Conformity is included in the packaging as a separate document.
Handset operation instructions:
Collision detection
- The system is designed to avoid possible damages to equipment due to collision. When the desk detects a sudden change in resistance, it will stop movement and move in the reverse direction by approximately 30 mm-50 mm (depending on the movement speed, collision force, and the load during a collision).
Troubleshooting MITTZON
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>