FRITHJILL HFSN-652 Swivel Grey Bar Stools Set Chiara Instruction Manual
- June 1, 2024
- FRITHJILL
Table of Contents
FRITHJILL HFSN-652 Swivel Grey Bar Stools Set Chiara
Specifications
| Component | Quantity |
|---|---|
| A (Chair Back) | 1 |
| B (Gas Lift) | 1 |
| C (Gas Lift Cover) | 1 |
| D (Base) | 1 |
| E (Lever) | 1 |
| F (Screws) | 4 |
| G (Screw Cap) | 1 |
| L (Washers) | M6 x 1, M3 x 1 |
PARTS LIST
Assembly Steps
- First, connect the Chair Back (A) with the Gas Lift (B), making sure the washers (L) are in place. Secure them together with the Screws (F), ensuring a 90% angle.
- Attach the Gas Lift Cover (C) to the assembly from step 1, and then insert the Gas Lift (B) into the Base (D).
- Next, the Lever (E) is to be connected to the mechanism under the Chair Back (A). This allows for height adjustment once assembled.
- Finally, place the assembly onto the Base (D) from step 2, ensuring that the Gas Lift (B) is securely inserted into the Base (D). The assembled chair should now be upright and stable.
Warning!
Please remove the plastic cap covering the assembly!
FAQ
-
What should I do if the chair is not stable after assembly?
Ensure that all screws are tightened properly and that the Gas Lift is securely inserted into the Base. -
How do I adjust the height of the chair?
Use the Lever (E) connected to the mechanism under the Chair Back to adjust the height. -
Can I assemble the chair by myself?
Yes, the instructions are designed for individual assembly, but you might find it helpful to have an extra pair of hands for stability. -
What is the purpose of the washers labeled L?
The washers (M6 x 1, M3 x 1) are used to secure the connection between the Chair Back (A) and the Gas Lift (B) during assembly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>