BABY MOOV A002103 Moov and Feed Portable And Rechargeable Bottle Warmer Instructions

BABY MOOV A002103 Moov and Feed Portable And Rechargeable Bottle Warmer

Product Specifications

• Brand: Babymoov
• Model: Moov & Feed
• Designed and engineered by Babymoov in France
• Country of Origin: France

Product Usage Instructions

Warnings
Children over 8 years can use the product under adult supervision. Do not place the appliance near heated surfaces or open flames to prevent overheating, fire, and injuries. Do not attempt to repair the product yourself to avoid hazards. Always follow the instructions in the user manual for safe usage.

Care Guide
Do not submerge the appliance in water. Avoid washing the control buttons and charging port with water to prevent damage.
Ensure that the product is not exposed to sharp objects or dropped from high places.

Precautions
The product contains a 27.75 Wh battery suitable for air transport. Dispose of the product separately from household waste at designated waste collection points. Do not mix electronic appliances with general council waste.

FAQ

Can children use the Moov & Feed product?
Children over 8 years can use the product under adult supervision to prevent any hazards.

Can I wash the control buttons with water?
Avoid washing the control buttons and charging port with water to prevent damage to the product.

IMPORTANT

READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.

WARNINGS

• This appliance may be used by children over 8 provided they are supervised, or that they have been told how the appliance works so that it can be used safely with full awareness of any risks.
• This appliance must not be cleaned and maintained by unless they are older than 8 and supervised.
• To avoid potential injury due to misuse, please use this product according to the method described in the user manual.
• Please put the cup out of the reach of children. Children should use it under the direct guidance of adults.
• Heating element surface is subject to residual heat after use.
• CAUTION: always check the temperature of the food before giving it to your baby, to avoid any risk of burning. When using bottles, shake them well to ensure the milk is thoroughly mixed. Pour a drop onto the inside of your wrist to check the temperature.
• This appliance contains batteries that are only replaceable by skilled persons.
• This product contains a lithium battery. It cannot be placed in the microwave, disinfection cabinet, oven, or soaked in water.
• Please do not place the product near the heated gas, rice cooker, and heating stove.
• It is prohibited to a place near inflammable and explosive articles.
• Please do not repair the product by yourself.
• Do not try to replace the battery by yourself, you may damage the battery, which may lead to overheating, fire, and personal injury.
• If the power cable is damaged, it must be replaced by the manufacturer, its after-sales service or similarly qualified persons in order to prevent a hazard.
• Please keep the charging port dry and avoid contact with water to avoid poor charging.
• Please turn off the product when it is not in use to avoid damage to the product.
• Please avoid scraping the cup with sharp objects or dropping it from high places.
• Electrical and electronic equipment must be disposed of separately from household waste. Do not discard electrical and electronic appliances in with your general council waste. Make sure they are disposed of at a separate waste collection point.

This symbol indicates that, throughout the European Union, this product must not be thrown away or mixed with household waste but disposed of at a separate waste collection point.

PRECAUTIONS

• Due to the inherent properties of plastic, plastic parts will be yellowing, brittle, peeling, and other natural aging phenomena if they are exposed to sunlight or high temperature for a long time.
• Caution: the bottle warmer may contain hot water and could cause scalds.
• When the temperature of the liquid added detected by the bottle exceeds 55 °C, the screen will appear “HI” to indicate high temperature.
• If heating a small amount of water (less than 200 ml), please wait 1 to 2 mins before giving the bottle to your child.
• Please do not put the following objects into the cup: dry ice, carbonated drinks (to avoid the contents ejected due to the rise of internal pressure); sour plum juice, lemon juice, and other acidic beverages (which may cause poor insulation); dairy products, infant food, etc. (long storage time may lead to corruption).
• The bottle warmer must only be used with the USB-C cable supplied. Using another cable could risk damaging the bottle warmer and cause injury.
• Plug not provided. Please choose a standard adapter (5 V /2 A charger adapter) to charge the product in addition to the USB-C cable supplied.

27.75 Wh battery, suitable for air transport. Ask your carrier or airline for details.

CARE GUIDE

• Change the water every 24 hours to prevent the build-up of bacteria. If not using this product for a long period of time, please drain out the water, rinse the bottle, wipe and store in a cool and dry place.
• Cleaning the bottle warmer:
  • Unplug the power cable before cleaning the bottle warmer. Turn off the bottle warmer by pressing the ON/OFF button for 3 seconds.
  • wait until the bottle warmer is cold before cleaning it.
  • Use a soft brush with soap and hot water to clean the inside of the stainless steel part. Leave to dry after cleaning. You can clean or rinse the bottle warmer between uses with clean water if using outdoors.
  • never immerse the appliance in water.
  • do not wash the control buttons and charging port with water. If you need to clean them, wipe with a damp cloth.
  • do not use detergent to clean the appliance.
• Stains may form inside the bottle due to water quality, milk stains or drinks residue after use. Clean the bottle with a soft cloth or bottle brush, do not use descaling products.

COMPOSITION

• a. Airtight silicone stopper
• b. Removable lid
• c. Pouring spout
• d. Secure opening and closing system
• e. Silicone loop
• f. Bottle body
• g. Control interface
• h. USB-C charging port

CONTROL INTERFACE

POWER SUPPLY

Before using the bottle warmer for the first time, charge the product for at least 3 hours using the USB-C cable included (plug not included).

STARTING THE APPLIANCE

The bottle warmer is also compatible with breast milk, powdered formula, coffee, tea and soup. For maximum performance and durability, we recommend heating water only in the bottle warmer, then preparing the mixture in your feeding bottle.

Unscrew the lid and fill the bottle warmer with the required liquid. Screw the lid back on and ensure the fastening system is in the closed and secure position.

HEATING AND KEEPING WARM

• Press the ON button for 3 seconds, the screen turns on.
• Choose the required temperature using the up and down arrows. You can select a temperature between 37 °C and 50 °C.
• The screen flashes for 3 seconds then stops, meaning that the required temperature has been recorded. Heating begins automatically and the current temperature of the liquid is displayed on the screen.

During heating, you can view the target temperature selected by briefly pressing the ON/OFF button. Otherwise the screen displays the current temperature of the liquid.

HEATING TIME CHART

• Once the liquid reaches the required temperature, the bottle warmer automatically switches to ‘keep warm’ mode to keep the liquid at the right temperature.
• The length of time the liquid can be kept warm will depend on the required temperature, the amount of liquid and the remaining battery level (maximum battery life: 7 hours).

If you wish to turn off the bottle warmer, press the OFF button for 3 seconds.

If the bottle warmer has a low battery, the battery icon flashes then turns off. You will then need to charge the bottle warmer using the USB-C cable included. Once charging is complete, the battery icon will stop flashing.

TROUBLESHOOTING TABLE

cable included.
Does not heat up enough or not at all| ∙ Water is too cold.

∙ Contains a liquid other than water.

∙ Low battery.

∙ Action not finalised.

| ∙ Where possible, use the bottle warmer for heating water only then prepare any mixtures in the feeding bottle itself to ensure the heating process works efficiently.

∙ Ensure the battery is fully charged.

∙ Ensure the heating cycle has started.

Lid is leaking| ∙ The lid is not fastened properly.| ∙ Ensure that the lid is screwed on tightly and secured using the safety latch.
Error codes E1, E2, E3| ∙ Error code indicating a malfunction.| ∙ Please contact our after-sales service department.
Error code E4| ∙ Error code indicating a malfunction.| ∙ Turn off the product, add water and restart the heating process.

Lifetime warranty. Register within 2 months.
See conditions at babymoov.co.uk.

Babymoov FR
Parc Industriel des Gravanches
16, rue Jacqueline Auriol
63051 Clermont-Ferrand 2 – France
www.babymoov.com

Babymoov UK Ltd
3rd Floor, East Reach House
East Reach
Taunton – TA1 3EN – England
www.babymoov.co.uk

Designed and engineered by Babymoov in France

References

• Babymoov® – Innovative Award-Winning Baby Products
• Babymoov® – Innovative Award-Winning Baby Products
• Babymoov® : Site OFFICIEL | Produits pour Bébé
• Lifetime Warranty Map | Babymoov®

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>