CISCO CATALYST CX Dual Channel Amplifiers User Guide

June 1, 2024
Cisco

CATALYST CX Dual Channel Amplifiers
User Guide

CATALYST CX Dual Channel Amplifiers

Factory Reset: Press and hold B and MANUAL while powering on
NEW 2.0 UPDATE

Turn over to see the feature specifications

AMP MODELS
Select one of six amp voicings from group 1 or 2 using the SELECTOR knob

EFFECT MODELS

  1. Press TAP button to switch categories
  2. Press and hold EFFECT 1 or 2 button to enter selection mode
  3. Turn the SELECTOR knob to select the desired effect model
  4. Press EFFECT 1 or 2 button again to lock selection and exit

CISCO CATALYST CX Dual Channel Amplifiers - EFFECT
MODELS AMP GROUP SELECTION
Press A and B simultaneously to switch between Amp Groups 1 and 2
SAVE CHANNEL
Hold either channel button A or B until you see the lights blink to save
MANUAL MODE
Press MANUAL to use manual mode – what you see is what you get
BANK SELECTION
Press and hold MANUAL and use the SELECTOR knob to access six banks of preset channels
SOFTWARE
The Catalyst Edit free software lets you adjust deep edit parameters and save/organize your presets

SPECIFICATIONS

| 12 Amp Voicings Models taken from the Helix® family of products
---|---
| Boost Custom matched to each amp design
| Built-In Effects 24 effects taken from the Helix® family of products
| Traditional Controls Primary controls immediately recognizable
| Tap Tempo/Tuner Set time-based effects or activate the onboard tuner
| Optional LFS2 Footswitch Change channels, effects, banks, and more

CATALYST
DUAL-CHANNEL AMPLIFIERS FEATURING 12 AMP VOICINGS TAKEN FROM THE HELIX® FAMILY OF PRODUCTSCISCO CATALYST CX Dual Channel Amplifiers -
PRODUCTS

| XLR Output Pro connection for stage and recording
---|---
| Effects Loop Insert external effects
| Power Amp In Connect your favorite modeler
| Power Level Control Consistent tone at any volume
| USB Interface Connect to Catalyst Edit app or record direct
| MIDI Receive channel/preset and CC messages USB MIDI only on Catalyst CX 60

© 2023 Yamaha Guitar Group, Inc.
All rights reserved. Line 6, the Line 6 logo, HELIX, CATALYST, and the CATALYST logo are registered trademarks of Yamaha Guitar Group, Inc. in the U.S. and/or other jurisdictions.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals