Nanning Yalei Electronic Technology ICEMOUSE BW003 Wireless Optical Silent Bamboo Mouse User Manual
- June 9, 2024
- Nanning Yalei Electronic Technology
Table of Contents
Nanning Yalei Electronic Technology ICEMOUSE BW003 Wireless Optical
Silent Bamboo Mouse
ICEMOUSE OPENING STEP
Step 1. Open the upper cover of the mouse as shown in the figure below.
- A, Slide the upper cover towards the back (move about 2-2.5 mm).
- B, Lift open the upper cover upwards.
- C, Once the upper cover is removed, Install the battery inside. The receiver can be placed on the middle shell.
- D, Put the upper cover back on the mouse. Click to make sure it is firmly closed.
Step 2. Turn on the power switch on the bottom of the mouse. Switch it to
the position “-“, as shown in the figure below.
Step 3. Insert the receiver into the USB port of the computer, laptop,
etc., to connect with the mouse.
Step 4. Press the “DPI button” as labeled in the figure below to select
the DPI you need. The mouse supports 800 DPI, 1200 DPI, 1600 DPI and 2400 DPI
PRODUCT KITS
Included components: USB receiver,colorbox,mouse, velvet bag,
ICEMOUSE SPECIFICATIONS
Connectivity/Iracking
SYSTEM REQUIREMENTS
- IBM/Mac laptop or compatible PC
- Windows7/8/10/2000/XP
- USB port
- Mac OS X and above
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that inte rference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the follewing measures;
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction