Redones 8140 Under Cabinet 2500mAh LED Lights User Guide
- June 1, 2024
- Redones
Table of Contents
Redones intelligent induction light
USER GUIDE
PRODUCT OVERVIEW
Thank you for purchasing our product.This product is perfect for decorating
various corridors, stairs, closets, garages, attics, and basements.lf there is
any missing accessories or any abnormalities after receiving the goods, please
feel free to contact us, we will contact you within 24 hours.lf you have any
questions or suggestions, you can contact us at any time.
EMAIL TO: supportRedones@163.com.
SPECIFICATION
| Power | 3W |
|---|---|
| Charge Voltage | 5V 1A |
| Working Current | <300 mA |
| Luminous Flux | 310Im (MAX) |
| CRI | Ra.80 |
| LED Quantity | 111 pcs |
| Color | 3000k / 4500k / 6000k |
| Motion Detected Distance | 3-5m / 10-15 feet |
| Dimmable | Yes |
| IP Grade | Indoor use only |
| Induction range | <120° |
| Size | LxWx H:11.8×1.65×0.59inch |
| Working mode | Day & night sensor mode Night sensor mode only Always ON mode |
HOW IT WORKS
-
Day & night sensor mode
The light will automatically turn on when it detects human movements during daytime or night (regardless of brightness), and it will automatically turn off after 15 seconds when people leave its induction range. -
Night sensor mode only
Light will turn on automatically once it detects human movements during night only (or dark space only, illuminance<151ux), and it will automatically turn off after 15 seconds when people leave its induction range. -
Always on mode
Light keeps on all the time, until! turned off manually.
FUNCTION
day and night sensor
always on mode
night sensor only| Display the current working mode with a red LED light
---|---
3000K
4500K
6000K| Display the current working color with a red LED light
brightness| Display the current brightness level with a red LED light
battery| Display the current remaining battery power
Flashing lights during charging,four red lights on when fully charged
BRIGHTNESS Button| Adjust brightness: 4 levels
ON / OFF/ MODE Button| Turn ON/OFF, choose working mode
COLOR Button| LED Color Switch: 3000k/4500k/6000k
HOW TO INSTALL
-
Full charge before use.
-
Tear off protect layer.
-
Choose a flat place and clean its surface. Press the lamp body together with the iron block with double-sided adhesive tape to the installation position for 5 seconds.
-
Remove light to charge easily when it should be charged.
NOTE
- Do not use as a toy for children.
- The induction effect depends on the ambient temperature, human body form, position, and moving speed.
- If the motion sensor lights do not work well or are not sensitive enough, please ensure the installation angle and position, and make sure it is facing the direction of people walking.
- Keep away from direct light and heat sources,such as an air conditioner outlet, heating outlet,humidifier,hearth and oven and so on.
- Full charge before use. The light should be charged at least every three months.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>