MIMOUSE EM4 AI Monster Hunter Instruction Manual

Mi Mouse EM4 AI
INSTRUCTION
MANUAL

EM4 AI Monster Hunter

Important Notes

• Please read the instructions carefully before using this product.
• To ensure your safety, please read the precautions carefully before using this product.

Product Introduction

Windows PC Installation Tutorial

1. Turn on the mouse power switch, take out the receiver and plug it into the USB interface of the computer.
2. For the first time, press the mouse “Speech button” for 3 seconds, and the computer will automatically open the driver download page, select windows system software download, and the installation is completed.
3. Click the ‘AI button’ to automatically download the M-AI software, wait for the download to complete, and follow the steps to click Install.
4. Use smart features. AI button, long press: smart writing, click: enter AI interface.

Mac PC Installation Tutorial

1. Turn on the mouse power switch, take out the receiver and plug it into the USB interface of the computer.

2. Access https://global.mimouse.com/download.html ,select the software download for Mac system, jump to APP Store, install and open the driver software.
   http://global.mimouse.com/download.html

3. Agree to turn on microphone access and click System Preferences > Security and Privacy > Privacy Set auxiliary functions, input monitoring and screen recording permissions (please delete the old version of mouse software first Permissions), which can be used when completed.
   Note : Please set up the mac 13 system in system settings > privacy and security.

4. Use smart features. AI button, long press: smart writing, click: enter AI interface.

Bluetooth Connection Method

1. Press the ‘Mode switch button’ briefly to switch to Bluetooth 1 or Bluetooth 2, and the upper status indicator will be blue or purple.
2. Long press the ‘Mode switch button’ for 3 seconds, and the blue light at the rear of the mouse will flash rapidly, indicating it is waiting for Bluetooth pairing.
3. Turn on your computer’s Bluetooth, search for and connect to EM4 AI.
   Note : Mouse bluetooth connection is not supported on the windows 7 operating system.

Connect three computers

Computer| Connection method| Press the ‘Mode switch button’ to switch between three computers
---|---|---
The first computer| Receiver
The second computer| Bluetooth 1
The third computer| Bluetooth 2

Indicator Description

Charging| The charging red light remains constant, turns off when fully charged.
---|---
Low battery| If the battery is below 20%, the blue light will slowly flash as the mouse is powered on/woken up, and it will turn off after 30 seconds.
Mode| Red light indicates receiver connection; Blue light indicates Bluetooth 1 connection; Purple light indicates Bluetooth 2 connection.
Pairing| The blue light rapidly flashes while waiting for pairing and turns off after pairing or timing out.

Note

• Use the included 5V-1A charger for charging.
• You can check the mouse battery level in the Mimouse Driver software interface.

Specification

Support system
(Compatible with)| Windows 7/8/10/11, MacOS 10.15 and above
(Bluetooth connection does not support windows7 operating system for the time
being; Apple’s system currently only supports some functions)

Packing List

Safety Precautions

Warning

• If the battery is used improperly, it can lead to leakage, explosions, and other incidents, resulting in personal injury or fire.
• Do not expose it to humid or high-temperature environments, and avoid contact with conductive materials or liquids.
• It is recommended to use a charger marked “Output 5V-1A” for charging; When charging, keep this product away from heat sources such as heating equipment.

note

• Do not disassemble, repair or modify this product yourself.
• When using the product indicator lights, please avoid getting close to the eyes f children or animals.

Charging instructions

• It is recommended to connect the mouse charging cable to the computer for charging.

Frequently Asked Questions

Plug the USB receiver into another USB port on your computer
The mouse cannot connect to computer’s Bluetooth| The Bluetooth version of the computer is too low| Connect to your computer using USB receiver mode
Windows 7 does not support Bluetooth connections
The cursor cannot move| The mouse is not turned on| Turn the mouse on
The mouse battery is low| Use it after charging
The mouse did not connect successfully to the computer| Reconnect the computer according to the Bluetooth mode and USB receiver pairing method
Abnormal functions such as voice recognition| Software download error| Retry after downloading the correct driver software
The driver software is not open| Retry after starting the driver software
The computer is not
connected to the internet or has poor network quality|  Check your computer’s network to ensure it’s functioning properly
Inaccurate voice recognition
loudly| Noisy surroundings| Use in a relatively quiet environment
Speaking too quietly or too| Speaking at a normal volume
Speaking too fast and unclearly| Speak at a normal speaking rate
Farther away from the mouse| Try again within 65cm of the mouse
Voice typing is not possible in some software| Restricted by usage rights| Exit the Mimouse driver software and restart it with administrator privileges
Prompt malicious programs when installing driver software on Apple computer| The driver software is not on the Mac APP Store| On the Mac, click System Preferences > Security and Privacy > General > Still Want to Open
Apple Computer Can’t Type| Mimouse software needs to obtain Apple system permissions| Set accessibility, enter listening, and screen recording permissions in System Preferences > Security and Privacy > Privacy.
(Please delete the permissions of the old mimouse software first)

Re-pairing method when the receiver loses fit

1. Turn off the mouse power, then press and hold the voice key while turning on the power switch
2. When the pairing indicator flashes blue, insert the receiver into the computer’s USB port
3. Pairing is successful and the indicator turns off

FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

*RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Warranty Description

Warranty Regulations:

• Within 7 days of receiving the product, if it exhibits any performance issues listed in the “Product Performance Failure Table” and is confirmed by Mimouse’s after-sales service center, you can receive free returns or exchanges.
• From day 8 to 30 after receiving the product, for issues in the “Product Performance Failure Table” confirmed by Mimouse’s after-sales service center, you can get free replacements or repairs.
• Within 12 months of receiving the product, for issues in the “Product Performance Failure Table” confirmed by Mimouse’s after-sales service center, you can enjoy free repair services.

No warranty regulations:

• Unauthorized repairs, misuse, collisions, negligence, abuse, liquid ingress, accidents, alterations, incorrect use of non-original product accessories, or tearing, altering labels, and anti-counterfeiting marks.
• Exceeded the validity period specified in the warranty regulations.
• Damage caused by force majeure.
• Conditions that do not meet the performance failures listed in the “Product Performance Failure Table”.
• Performance issues caused by human factors for this product and its accessories as listed in the “Product Performance Failure Table.”

Friendly reminder:

To ensure safe product transportation during shipping, it’s advised to keep the packaging box for at least 30 days from the date of receipt.

Product performance failure table

Indicator not lighting up
Mouse buttons not functioning normally
Mouse scroll wheel not functioning normally

References

• MiMouse
• MiMouse

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>