AG Brands AG310 Cordless Handheld Car Vacuum Cleaner Instruction Manual

AG Brands AG310 Cordless Handheld Car Vacuum Cleaner

Thank you for choosing the AG310 vacuum cleaner! We appreciate your trust in our product and are thrilled that you’ve made this choice to enhance your cleaning experience. We’re confident that the AG310 will exceed your expectations, offering powerful performance and efficiency in keeping your home impeccably clean. Should you have any questions or need assistance, our customer support team is always here to help. Once again, thank you for your purchase. We’re excited for you to experience the convenience and effectiveness of the AG310 vacuum cleaner.

Specification

Product Overview

1. Power Button
2. Indicator Lights
3. Light Button
4. Dust Container Release Button
5. Dust Container
6. HEPA Filter
7. Stainless Steel Filter Holder
8. One-release-button
9. Dry Use
10. Handle
11. Battery Release Button
12. Dust Baffle Plate/ Anti-leakage film
13. Upholstery Tool 2-in-1 Crevice Tool
14. Charging Dock
15. DustBrush

Button Functions

Power Button
Press the power button forward once and the Cordless Vacuum starts operating in weak-suction mode, which lasts up to 40 minutes. Press the power button forward twice and the Cordless Vacuum starts working in strong-suction mode, which lasts up to 30 minutes.
Press the power button back to the bottom and the Cordless Vacuum stops working.

Light Button

Press the button to start the lighting function, and then press again to turn it off.

Dust Container Release Button

Press and hold the release button, and lift the dust container upward.
Take out the filter from the dust container and then empty the dust

One-Click Dust Emptying Button

Press the dust removal button at any time to empty the garbage in the dust collection box. When there is a lot of accumulated garbage in the dust collection box, you need to remove the dust collection box and filter seat, and thoroughly remove the garbage and dust.
(Please clean the dust collector and filter regularly to extend the service life of the vacuum cleaner)

Charging and Storage

Hold the dust cup, press the button, move the dust cup outward with other hand (i.e. in the direction indicated by the button arrow).

Charging and Storage

power decreases
Low Battery| The last indicator flashes in red for 10S and then goes out.
No Battery| Indicator lights all off
Charging| The indicator blue light flashes alternately, and the num­ ber of lights increases as the power increases.

Charging Method I: put the whole machine on the charging dock.

1. Please fully charge the appliance before the first use.
2. When there is only one indicator left in a red flashing state, indicating that the appliance power is low, it needs to be charged.
3. Please make sure the appliance is off before charging.
4. Please place the charging dock on a flat surface and power up the adapter.
5. Place the appliance correctly on the charging dock. Please make sure that the charging port of the appliance and the charging port of the charging dock are in contact with each other.
6. 3 indicators are blinking blue alternately in turn; as the power increases, they gradually light up one by one until all become solid blue, after 10S the three blue indicators  go off, indicating that charging is complete.
7.  When not in use, the appliance can be placed on the charging dock for storage.

Charging Method II: Battery Pack Charging

The battery pack can be disassembled and charged directly with the adapter.

1. Press the removal button to remove the battery pack from the appliance.
2. Connect the adapter charger directly to the battery pack for charging.
3. When the battery is low, the indicator light turns red, and the blue light flashes during the charging process until the blue light is always on, indicating that charging is complete.

Can the adapter be removed from the charging dock?
Yes, you can. Please follow the steps below.

1. Please make sure the charging dock is not powered on.
2. Push the adapter’s plug retainer down until the plug is visible.
3. Remove the plug from the charging dock.

Users can choose to remove the adapter from the base or not, depending on their needs.

Note: Please place the charging dock on the flat surface to use It is a normal phenomenon that the vacuum may heat up during charging.

The vacuum must be charged by the included charger.

1. Fully charge the vacuum before first use.
2. 3 indicator lights flashing in red means that the battery is extremely low, please charge the vacuum in time.
3. Make sure the vacuum is turned off before charging.
4. Place the charging dock on a flat surface, and then plug the adapter into the socket.
5. Place the vacuum on the charging dock to charge, make sure the plug fixed on the dock is exactly inserted into the charging port of the vacuum.
6. Blue indicator lights will flash during charging and be on after fully charged.
7. The vacuum can be placed on the charging dock for daily storage when it is not in use.

Nozzle Attachments

2-in-1 Crevice Tool
For cleaning car doors, car seats, sofa gaps, ceilings, ceiling lamps, curtains, keyboards, carpets, floors, pet hair, etc. {The brush tool is not suitable to clean the pet hair).

When you need to use the dusting brush, just flip up it 180 degrees.

Upholstery Tool
For cleaning couches, beds, curtains, tables, chairs, and other furniture with fabric surfaces.
Not suitable to clean gaps, corners, paper clips, coarse sand, soybeans, donuts, coffee beans, and other heavy particles.

Dust Container Cleaning and Maintenance

1. Turn off the vacuum cleaner and press the release button to remove the dust container.

   • The dust container cannot be removed if the release button is not pressed. Do not remove the dust container by brute force.
   • Empty as soon as the dust reaches the level of the MAX mark.
   • Suggestion: Empty the dust container timely after each use.
     

2. Take out the HEPA filter and the stainless steel filter holder, and empty the dust container, Twist the HEPA filter in the direction marked by the stainless steel filter holder to separate it from the holder.
   Shake off the dust on the HEPA and the stainless steel filter holder.
   

3. Install the HEPA filter into the stainless steel filter holder as marked, and then install the HEPA filter and stainless steel filter holder into the dust container. Align the dust container with the vacuum and then connect them until you can hear a click.

Suggestion: Empty the dust container in time after each use.

Cleaning and Replacing Filter Parts
TIP: It is recommended to wash the HEPA after using it 20 times.

For optimal performance, empty the dust container after each use of the vacuum cleaner, and wash the dust container regularly.
The HEPA filter must be washed when it becomes dusty or the suction will be weak or the motor will be overheated.

Turn off the machine and empty the dust container before cleaning;

1. Detach the dust container from the vacuum by pressing the dust container release button.
2. Pull the HEPA filter and the filter holder vertically upwards from the dust container.
3. Remove the HEPA filter by twisting it in the direction marked by the stainless steel filter holder.
4. Rinse the HEPA, the filter holder and dust container with water separately.
5. After washing, place the dust container, the HEPA and the filter holder in a ventilated and dry environment at least for 24 hours. Let them completely dry.
6.  After thoroughly drying, reinstall the HEPA filter into the stainless steel filter holder in the correct direction as marked on the stainless steel filter holder.
7. Place the HEPA filter and stainless steel filter holder inside the dust container, and then install the dust container back into the appliance.

Filter Lifespan: 50-100 times
Filter Washing Frequency: It is recommended to wash the filter after using it 20 times or every month.
Filter Replacing Frequency: Replace the filter every 3 months if you frequently use the vacuum cleaner.

Troubleshooting

Important Safety Instructions
When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS

BEFORE USING (THIS APPLIANCE)

WARNING – To reduce the risk of fire, electric shock, or injury:

• Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing.
• Do not use on wet surfaces.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer’s recommended attachments.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without dust bag and VOR filters in place.
• Household and indoor use only.

WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

1. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the appliance. Carrying the appliance with your finger on the switch or energizing appliance that have the switch on invites accidents.

2. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

3. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection] from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

4. Under abusive conditions, liquid may be ejected from the battery; avoid contact.
   If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

5. Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.

6. Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause explosion. The temperature of 130°C can be replaced by the temperature of 265°F.

7. Do not charge the battery at ambient temperature below 39°F (4°C) or above 104
   °F (40°C). Also keeping the temperature range of between 39-104°F when storing unit or during use. Follow all charging instructions and do not charge the battery pack or
   appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.

8. Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.

9. Do not modify or attempt to repair the appliance or the battery except as indicated
   in the instructions for use and care.

SAVE THESE INSTRUCTIONS

Battery Safety

1. This appliance includes Li-ion batteries, do not incinerate batteries or expose to high temperatures, as they may explode;
2. Liquid ejected from the battery may cause irritation or burns;
3. In case of emergency, contact professional help immediately;
4. Leaks from the battery cells can occur under extreme conditions. Do not touch any liquid that leaks from the battery. If the liquid that gets on skin, wash immediately with soap and water. If the liquid gets into the eyes, flush them immediately with clean water for a minimum of 10 minutes and seek medical attention. Wear gloves to handle the battery an dispose of it immediately in accordance with local regulations;
5. Shorting the battery terminals may cause burns or fire;
6. When the battery pack is not in use, keep it away from paper clips, coins, keys, nails, screws or other small metal objects that could make a connection from one terminal to another;
7. When you dispose of the appliance remove the battery and dispose of the battery safely in accordance with local regulations.

WARNING

1. The appliance is only to be used with the power supply unit provided with the appliance.
2. This appliance contains batteries that are only replaceable by skilled persons.
3. WARNING: For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance.
4. The battery must be removed from the appliance before it is scrapped.
5. The appliance must be disconnected from the supply mains when removing the battery.
6. The battery is to be disposed of safely.

© AG Brands B.V. BOVENDIJK 203 3045PD ROTTERDAM THE NETHERLANDS DESIGNED IN THE NETHERLANDS

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>