IMETAPLUS F21.5m F2 Tailgate Light Bar Instruction Manual
- June 2, 2024
- IMETAPLUS
Table of Contents
IMETAPLUS F21.5m F2 Tailgate Light Bar
What’s Included
- Tailgate Light Bar x1
- 4-pin Wiring Harness x1
- Mounting Brackets x2
- Self-tapping Screws x4
Note: Lighting laws vary depending on the jurisdiction, check your local laws before installation.
Installation Steps
- Connect the 4-pin wiring harness to the tailgate light bar.
- Clean the surface where the tailgate light bar will be mounted.
- Attach the tailgate light bar to the vehicle using the mounting brackets and screws.
- Ensure the wiring is properly secured and connected to the vehicle’s lighting system.
4 PIN Wiring Harness
The 4 PIN wiring harness includes the following wires:
- Black Wire – Ground
- Red Wire – Brake Light
- Yellow Wire – Turn Signal
- White Wire – Reverse Light
Optional Accessories
The diagrams are the recommended installation method for the F2 Tailgate Light Bar. Please confirm the year model and make of your vehicle before installing. The matching items below require additional purchase and are not included in our package.
- 2015–2018 F150 (3PIN)
- 2018–2020 F150 (6PIN)
- 2015–2020 F150 (16PIN)
- 2019+ Silverado/Sierra 1500 (6PIN)
Disclaimer
The Installation Manual is intended as assistance to reduce setup time and is not liable for improper installation. If you are uncertain of wiring or inexperienced with aftermarket upgrades, please seek professional assistance.
2 Year Warranty
The product comes with a 2-year warranty from the date of purchase.
Specifications
| Component | Quantity | Description |
|---|---|---|
| Tailgate Light Bar | 1 | LED light bar for vehicle tailgate |
| 4-pin Wiring Harness | 1 | Harness for connecting the light bar to the vehicle’s |
electrical system
Mounting Brackets| 2| Brackets used for attaching the light bar to the vehicle
Self-tapping Screws| 4| Screws for securing the mounting brackets
FAQ
- How do I install the tailgate light bar on my vehicle?
- Follow the installation steps provided in this guide, ensuring you connect the wiring harness correctly and mount the light bar securely.
- What vehicles are compatible with the F2 Tailgate Light Bar?
- Compatibility varies by vehicle make and model. Optional accessories for specific models such as the Ford F150 (2015–2020) and Silverado/Sierra 1500 (2019+) are available for purchase.
- Can I install the light bar myself?
- Yes, if you have basic knowledge of vehicle electrical systems and follow the installation instructions carefully. If not, it is recommended to seek professional assistance.
- What should I do if the light bar is not functioning properly after installation?
- Check all connections to ensure they are secure and correct. If issues persist, contact customer support or seek professional assistance.
- Is the light bar legal to use in all states?
- Lighting laws vary by jurisdiction. It is important to check your local laws before installation to ensure compliance.
What’s Included
Installation Steps
STEP 1
Prior to installation, be sure to test the tailgate light bar by temporarily connecting the 4-pin flat connector to the trailer tow hardness to ensure full functionality.
For trucks do not have a 4-pin trailer tow harness, you will have to hardwire the light bar into the truck’s existing wiring and test the running, brake and turn signals for full functionality. See test steps as below:
- First, strip the wire of the tail light assembly or the 7 pin tow harness.
- Activate a function (running, turn signal, brake, or reverse)
- Use a voltmeter to read which wire is showing 12-14V.
- Repeat with the each wire till all wires have been identified, mark down each wire if necessary.
When you have determined the light bar is working properly,proceed to “STEP 2”.
STEP2
Remove tailgate from vehicle.
STEP 3
Thoroughly clean the area where the tailgate light bar will be mounted.
STEP4
Mark out where you want to mount the included clips, taking straightness and
placement into consideration.
STEP 5
OPTION 1
On the back of the tailgate light bar, peel off the adhesive tape and apply firmly to the cleaned area.
OPTION 2
Use the included screws and clips to solidly mount the light bar to the
cleaned area. 
STEP6
Splice the white wire coming from the tailgate light bar to the factory tail light or the 7-pin trailer tow hardness.
STEP7
Turn on the factory lights one by one to check all functions work properly,
then reinstall the tailgate.
4 PIN Wiring Harness
Best Solution For Vehicles With 2020 & Newer
HARDWIRING
If 4 pin wiring harness, use image below to identify wire color functions and
pair them to appropriately identified wires on vehicle. 
Optional
HOW TO CONNECT TO YOUR VEHICLE?
The diagrams are the recommended installation method for the F2 Tailgate Light
Bar. Please confirm the year model and make of your vehicle before installing.
The matching items below require additional purchase and are not included in
our package.
Disclaimer
The Installation Manual is intended as assistance to reduce setup time and not liable for improper installation. If you are uncertain of wiring or inexperienced with aftermarket upgrades, please seek professional assistance.