Uvish 2Q8P3UOW Shower Head Extension Arm with Flange Instruction Manual
- June 2, 2024
- Uvish
Table of Contents
Uvish 2Q8P3UOW Shower Head Extension Arm with Flange
Product Description
This shower arm is made of high strength, impact resistant, corrosion resistant stainless steel, to prevent leaks. This product is designed ideally for tall individuals to completely change shower experience with its “S” shaped shower arm which will create a good space and comfortable spot within your shower area.
Step-by-step Installation Guide
-
Turn off the main water supply before connecting to any existing pipework.
-
The most important step:
-
Slide the new flange onto the shower arm. Wrap threaded tape around the threads on both ends of the shower arm.
-
Screw the long end of the shower arm into the supply pipe in the wall and rotate the arm to engage the threads. Slide the flange over the shower arm.
-
Install shower head and hand tighten. Wrap a cloth around shower head to protect finish\ and wrench tighten.
-
Turn on supplies and test all connections. If you detect a leak, turn off the water supply valve and check that your connections are properly tightened as well as the seal ring is in place at every connection point.
Sweep Tips
The thread specification of inlet is 1/2″ NPT, suitable for standard shower pipes. The thread specification of outlet is G1 /2, suitable for sprinkles of standard interface. When using wrench or pliers, always protect finishes by wrapping parts with a cloth.
Maintenance
Your new shower arm is designed for years of trouble free performance. Keep it looking new by cleaning it periodically with a soft cloth. Avoid abrasive cleaners, steel wool and harsh chemo irritate these will dull the finish and void your warranty.
Package Includes
- 1 * shower arm
- 1 * flange
- 1 * Teflon tape
- 1 * 1/2 NPT wall connector
Contact Us
If you have any issues with our product, please feel free to contact us.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>