Zlolen p-collar 627 Dog Training Collar User Manual

Zlolen p-collar 627 Dog Training Collar

Product Information

Specifications

• Model : p-collar 627
• Training Modes : Beep, Vibration, Static
• Adjustable Levels : Beep (1-4), Vibration (1-16), Static (1-99)
• Waterproof : IPX7
• Battery : Rechargeable lithium-polymer
• Support : Maximum 2 collar receivers with 1 remote
• Safety Feature : Stimulation lock and set

Product Usage Instructions

Important Safety Information

• WARNING: Do not use for aggressive dogs to avoid severe injury.
• CAUTION: Use a solid leash during on-leash training to restrain your dog effectively.

Package Contents

1. Hand Remote
2. Collar Receivers
3. Charging Cable
4. Wrist Strap
5. User Manual
6. Test Light Tool
7. Contact Points
8. Silicone Caps
9. Contact Spring Sheet

Overview Hand Remote Control
Display Screen, Mode Switch, Beep, Vibration, Level Adjustments, Charging Port

• Charge The Remote And Receiver Collar
  Recharge the transmitter and receiver as indicated by LED lights. Follow battery care instructions for longevity.

• Turning the Training Collar ON/OFF
  Flick up to unlock the remote. Click power button to turn on/off receiver collar.

• Button Functions
  Beep Button: Sends a beep stimulation to the receiver.

FAQ (Frequently Asked Questions)

1. Q: Can this collar be used for aggressive dogs?
   A: No, it is not recommended to use this product for aggressive dogs to avoid potential injuries.

2. Q: How do I know when to recharge the remote and receiver?
   A: Recharge the transmitter when LED shows 1 bar or system doesn’t stay on when pressed. Receiver needs recharging when the indicator light blinks red or doesn’t come on.

Dog Training Collar
User Manual
Model p-collar 627

CHARACTERISTICS

• Beep ,Vibration and Static training mode
• 1-4 adjustable beep level
• 1-16 adjustable vibration level
•  100% IPX7 waterproof collar receiver
• 1-99 adjustable static level
• Long-life rechargeable lithium-polymer battery
• Support maximum 2 collar receivers with 1 remote
• Lock and set stimulation safety feature

Important Safety Information

This is the safety alert symbol. It is used to alert you to potential injury hazards. Obey all safety messages that follow this symbol to avoid possible injury.

WARNING
Do not use for the aggressive dogs. This product is not use for the aggressive dogs because aggressive dogs can cause severe injury to their owners and others.

CAUTION

• Safety during on-leash training
• While during on-leash training. Your dog should be on a solid leash, long enough for him to attempt to chase an object, but short enough for him not to reach a road or other unsafe area. You must also  be physically strong enough to restrain your dog when he tries to chase.
• Risk of skin damage
• If the collar wear too long or make it too tight on the pet’s neck might cause the skin damage from redness to pressure ulcers.
  • Avoid leaving the collar on the dog for more than 8 hours per day.
  • Please reposition the collar for every 1-2 hours daily if it is possible to avoid the damage on the skin.
  • Never connect a lead to the electronic collar, it will cause excessive pressure on the contacts.
  • Please remove the collar after swimming or waking on the rain. Make sure the product and dog hair are all dry after to put it back. A wet hair will increased the friction between the contacts and skin.
  • If a rash or sore is found, discontinue use of the collar until the skin has healed. If the condition persists beyond 48 hours, see your veterinarian.
  • This product is not a toy, please keep it away from children.
  • This product is only use for dogs over 6 months and healthy.

Package Contents

1. Hand Remote
2. Collar Receiver
3. Charging Cable
4. Wrist Strap
5. User Manual
6. Test Light Tool
7. Contact Points
8. Silicone Caps
9. Contact Spring Sheet

Overview

Hand Remote Control

Collar Receiver

Display Screen

Charge The Remote And Receiver Collar

Recharge the transmitter if the LED shows only 1 bar on the indicator, or the system will not stay on when any button is pressed.

Recharge the receiver when the indicator light is blinking “Red” or does not come on. The indicator light will turn solid red during charge cycles and turn blue if it is fully charged.

Please add this about the batteries:

• Your electric collar is outfitted with Li Polymer batteries which requires specific care to assure longevity. It is best not to let the battery be fully discharged and if it does, recharge immediately or
• irreversible damage may occur. Keep the units away from extreme heat and cold temperatures.
• When a charger is not in use, disconnect it from the power source.
• Fully charge the batteries if the unit is to be stored without use for a period of 3 months or more.

Turning the Training Collar ON/OFF

Collar Receiver

• Click the power button to turn on the receiver, it will vibrate once and the blue light will flash once.
• Press and hold the power button for 2 secs to turn off the receiver collar, it will vibrate twice and red light will flash twice.

BUTTON FUNCTIONS

1. Beep Button
   Sends a beep stimulation to the receiver.

2. Vibration Button
   Sends a vibration stimulation to the receiver. It will send a continuous vibration stimulus for long as the Vibration Button is pressed, for up to 10 seconds.(this is safety feature designed to prevent accidental over- stimulation of your dog)

3. Static Button

   • When you press static button once, it will send a single pulse of stimulation at the set level .
   • When the Static Button is pressed continuously, it will send pulses of stimulation for as long as the button is pressed, for up to 10 seconds (this is safety feature designed to prevent accidental over-stimulation of your dog).

4. 1/2 Button

   • The unit supports the training of two dogs. Press this button to select channel.
     Note: Press and hold the “1/2 Button” 5 seconds to unlock the dog2. (this is a safety designed to prevent mistakenly touching)

5. How to Use Test Light Tool

6. Make sure the Remote and Collar Receiver are paired.

7. Put the test light tool vertically on the 2 contact points, ensuring the metal wire has direct contact with the top of the 2 points.

8. Press the static button on the remote. The test light will be on. The higher the static level is the redder the light will be.
   Note: For dog with shorter coats use 2pcs short contact points and install the conductive silicone caps onto the contact points to make them softer, it may be better for your dog’s skin. For dog with thicker coats, please use 2 pcs long contact points and install contact spring sheet.

Fit The Collar Receiver****

• The collar should be adjusted to allow the “contact points”to have direct contact with the skin. You should be able to fit a finger between the collar strap and your dog’s skin.
• Too loose and the contact points will not be able to administer the stimulation reliably and can cause skin irritation due to chafing.
• The optimal position for the collar receiver is on either side of the dog’s windpipe.

How To Find The Best Static Level For Your Dog

Very Important: Always start at the lowest level and choose the best level for your dog.
Follow the steps below to find the best Level:

1. Starting at Level 1, press the static button to see the dog’s reaction.
2. Gradually increase the stimulation levels until your pet reliably responds to the stimulation.
3. If your dog continues showing no response at Level 30, check the fit of the collar receiver. If your dog has long or thick hair, install contact spring sheet, or dog’s hair will need to be trimmed around  the contact points, If the “Contact Points” is no contact with the dog’s skin, there will be no static stimulation .
   Note: If all of these steps have been done and the dog continues showing no reaction, see the “How to Use Test Light Tool”(Page 10).

Training Tips

If you want to correct the dog’s bad behavior, for example, barking, please follow these training steps.

1. Put a separate non-metallic collar on your dog’s neck above the collar receiver, and attach an 8-10 feet leash.
   Caution: Be sure the extra collar does not put pressure on the contact points.

2. Hold the leash and the remote.

3. Choose your pet’s recognition static level.

4. As soon as your pet is barking, press the stimulation button and give a command “No” or “No barking.”

5. Release the stimulation button immediately once your dog stops barking and praises it.

6. If your pet ignores the stimulation, increase the Intensity Level by 1 to 3.

7. Practice this training in several different scenes.

Pairing

Note: You may skip this step because the set is already paired by factory setting.

1. Make sure the collar receiver is turned off and the channel switch of remote is on “Dog 1”.

2.  Press and hold the power button of  receiver for 3 secs until the red and green lights flash alternately.

3.  Press and hold the Beep and Vibration buttons of remote at the same time to pair the receiver.

4. Pairing successfully, the green light on the receiver flashes 3 times.

Two Receiver Collars System

Part I : Pairing 2nd Receiver Collar
Note: You need to own an additional collar receiver.

1. Make sure the receiver is turned off and the channel switch of remote is on “Dog 2”.
   Note: Press and hold the “1/2 Button” 3 seconds to unlock the dog2. (this is a safety designed to prevent mistakenly touching)

2. Press and hold the power button of receiver for 3 secs until the red and green lights flash alternately.

3. Press and hold the Beep and Vibration buttons of remote simultaneously to pair the receiver.

4. Pairing successfully, the receiver beeps 3 times and the blue light flashes 3 times.

Part II : Receiver Switching
Able to train 2 dogs separately. Regulator channel button selects the dog to train.

Troubleshooting

• Q: Is the static safe for my pet?
  A: It is unpleasant, but harmless to your dog, please select the appropriate static electricity level. Electronic training equipment requires the interaction and training of the owner.

• Q: My dog is not reacting to the system.
  A: – Make sure the receiver and transmitter are turned on.

  • Make sure the remote channel 1 or 2 is correct with the receiver collar. If not, please pair the remote and the receiver collar again. Refer to “Pairing” (Page 14) for more information.
  • Make sure the collar strap is tight enough so both contact points are touching the dog’s skin.
  • The contact points may be too short for the dog. Change longer contact points or Contact Spring Sheet that are more appropriate for your dog. If you are already using the longest contact points available, you might need to trim down the hair on the dog’s neck so both contact points are touching the dog’s skin.
  • The intensity level may be too low for your dog. Keep increasing the stimulation until the dog responds, usually with neck movement, head shaking, looking over its shoulder, etc. (response may be very subtle)

• Q: The receiver doesn’t seem to provide static stimulation to the dog?
  A: Receiver contact points from Receiver. Connect test light to the  receiver and test for stimulation. If the test light is blinking, receiver is providing stimulation.

• Q: How can I get support when I have product problems?
  A: Please feel free to contact our official customer service mailbox, any problems about the product will be resolved here Support@zlolen.com.

Warranty

• 1-Year Warranty
• The original purchaser for this unit is provided with a 1-YEAR Warranty. The warranty begins on the date of purchase. For the first year, coverage is provided for both parts and labor on warranty repair services. After the first year, the Limited Lifetime Warranty covers parts only, and does not cover labor fees and Accessories. Accessories such as straps and batteries are covered for the first year only.
• All shipping fees incurred, the cost of accessories after the first year, and labor fees associated with out of warranty repair work are the customers responsibility.
• Not Covered Under Warranty
• We DO NOT offer a warranty for products that have been bought secondhand or were resold. Issues of replacement and refunds on units purchased less than 30 days from an authorized dealer must be addressed to the dealer directly. If the products purchased from an authorized dealer are after 30 days from the date of purchase, please send the units to us for service and repair.
• We DO NOT cover the cost of repairs and replacements due to misuse by the owner or dog, improper maintenance, and/or lost units. The warranty is void if the unit has been altered or an unauthorized person has damaged the unit while attempting repair work.
• Procedure for Repair Work
• If the unit is malfunctioning, please refer to the ‘Troubleshooting” in the manual before sending it back for service. A copy of the sales receipt showing the purchase date may be required before warranty work is initiated. Please include a brief explanation outlining the problem, and include your name, address, city/state/zip code, daytime phone number, evening phone number, and email address.

Compliance FCC – USA

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Modification or changes to this equipment not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  1. Reorient or relocate the receiving antenna.
  2. Increase the separation between the equipment and receiver.
  3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  4. Consult the dealer or an experienced radio/TV technician for help.

Shenzhen Jingyi Technology Co., Ltd

1-Year Warranty

•   Support@zlolen.com
• 1-855-888-9922 (Mon-Fri, EST 9:00-17:00)
•    219  Community, Bao’an District, Shenzhen

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>