Mio C320 Mini Car Security Dash Camera User Guide
- June 4, 2024
- Mio
Table of Contents
Mio C320 Mini Car Security Dash Camera
Getting to know your dashcam
- Device mount socket
- Mini-USB connector
- Memory card slot
- System indicator
- Microphone
- LCD screen
- Power button ( ) Function keys
- Camera lens
- Speaker
- Shutdown button
Using your dashcam in a vehicle
Caution: Do not operate the device while driving. Using this product does not change the requirement for a driver to take full responsibility for his or her behavior. This responsibility includes observing all traffic rules and regulations in order to avoid accidents, personal injury or property damage.
-
Make sure that your car is parked on level ground. Clean the windshield with rubbing alcohol and make sure that the installation area is free of dust, oil and grease.
Follow the instructions to securely mount your dashcam (Figure 2-A) in a vehicle. -
When adjusting the angle of mounting (Figure 2-B), make sure that the camera’s view is parallel with the level ground and the ground/sky ratio is close to 6/4.
-
Route the cable through the top ceiling and the A-pillar so that it does not interfere with driving (Figure 2-C). Make sure that the cable installation does not interfere with the vehicle’s airbags or other safety features.
Note: The installation illustrations are for your reference only. If you encounter any problems during installation, please contact a skilled installer (for example, the service personnel of the vehicle) for assistance.
Using a memory card
Note: MiTAC does not guarantee the product’s compatibility with memory
cards from all manufacturers.
The dashcam supports Class 10 memory cards with 8 GB – 128 GB capacity.
Hold the card (MicroSD) by the edges and gently insert it into the slot as
shown in the illustration.
To remove a card, gently push the top edge of the card inwards to release it
and pull it out of the slot.
Formatting a card
To format a memory card (all data will be erased), press >
Format.
Function keys
The device provides 4 function keys to control the corresponding icons displayed on the LCD screen. The keys’ functions may vary on different screens.
Recording screen (Figure 4-A)
- Opens the Menu screen.
- Takes a photo.
- Manually starts an event recording.
Menu screen (Figure 4-B)
- Acts as the BACK button.
- Acts as the ENTER button.
- Moves to the previous option.
- Moves to the next option.
Setting the date and time
To make sure that the date and time of your recordings are correct, check the
settings before you begin recording.
- Press > Settings > Date/Time.
- Use to adjust the value of the selected field; press and repeat the step until all fields have been changed.
- When done, pressC .
Continuous recording
The dashcam automatically turns on once the vehicle engine is started. The
system will automatically start continuous recording shortly after start-up.
The recording may be divided into several video clips; recording will not stop
between video clips. When your memory card fills up with continuous
recordings, it will automatically record over the oldest existing files in
this category.
Event recording
By default, if an event happens such as sudden impact, highspeed driving, an
aggressive turn or an accidental crash during continuous recording, the G
sensor will prompt the dashcam to start an event recording.
The event recording will save moments before and moments after the event. When
your memory card fills up with event recordings,it will record over the oldest
existing files in this category.
Camera mode
The dashcam allows you to take a photo. If the recording is in progress, press
to take a photo.
Playback mode
- Press > File Playback.
- Select the desired type.
- Select the desired file from the list and then press to start playback.
System settings
Note: Not all setting items and options are available for all models.
To customize the system settings, press .
MiVue Manager
MiVue Manager™ is a tool for you to view the videos recorded on a MiVue™
dashcam. Download MiVue Manager from the Support page of Mio™ website
(www.mio.com/support) and follow the onscreen
prompts to install it.
Playing the recording files
- Remove the memory card from the dashcam and access the card on the computer via a card reader. You are advised to copy the recording files to your computer for backup and playback.
- Start MiVue Manager on the computer.
- Double-click the desired file on the file list to start playback.
For more information
For regulatory identification purposes, MiVue C320 is assigned a model number of N530.
WARNING: This product contains chemicals known to the state of California to cause cancer, or birth defects or other reproductive harm.