SuperLead 7200WPBT Bluetooth Keyboard User Guide
- June 2, 2024
- SuperLead
Table of Contents
7200WPBT Bluetooth Keyboard
User Guide
7200WPBT Bluetooth Keyboard
Power on
Power off
Connection switching
If you want to switch from “Connect via Superlead Dongle Connector” to “Connect via Bluetooth setup”, you need to scan the barcode “Bluetooth Keyboard”
Connect to Bluetooth (choose one of three ways)
-
Connect via Bluetooth setup:
Note: In this connection mode, after the current host successfully connects to the scanner Bluetooth, the scanner can be reconnected to the current host automatically when it reboot. Host switching method:
You need to find the device’s serial number by setting-Bluetooth on the current host firstly, and then ignore or delete it.
Bluetooth connection APP -
Connect by scanning APP QR code:
http://www.superlead.com/adminxp/upfile/Superlead_BLE_AUTO_V1.1.apk
Note: In this connection mode, the scanner will not be reconnected automatically when it reboot. It is necessary to rescan the APP QR code on the host. Connect via Superlead Dongle Connector: -
Host switching method:
Scan the APP QR code on the host you want to switch.
Note: In this connection mode, when the connector is inserted
into the host, the scanner can be reconnected automatically when it reboot.
Host switching method:
Plug the connector into the host you want to switch.
Top light and sound prompts
| Light color | Feature | State | Sound cue |
|---|---|---|---|
| – | Not connected to Bluetooth | Do not work | – |
| Blue | Bluetooth connection successful | On/Flashing | “DEE” |
| Red | Charging while not connected to Bluetooth | Steady on | – |
| Red | Low power alarm under the power-on state | Flashing | Continuous |
intermittent
“DEE”
Red& Blue| Charging while connected to Bluetooth| Steady on| –
Blue| Decode successfully| Flash| “DEE”
Common configuration code
Common fault
-
The serial number of the scanner cannot be found, the scanner cannot be connected to the pos or computer.
Solution:
(1) Download the Bluetooth connection APP on the host, and then scan the QR code in the APP with the scanner
① Scan the barcode “Close Bluetooth” ② Shut
down and restart the scanner
③ Scan the barcode “Bluetooth Keyboard”, and find the serial number of the scanner on the host for connection -
Scanner shuts down automatically, drops the line without operating.
Solution:
① Scan the barcode “Never Power Off” ② Scan the barcode “Power Off” to save the setting -
The scanner cannot be turned on, charged or scanning.
Solution:
Return to factory for maintenance inspection
Product use precautions
- Please use the charger and cable that comes with the product to charge. Do not use the charger and cable of the mobile phone or tablet computer to charge, which will cause the machine to burn out and cannot be used, and artificial damage is not within the scope of maintenance.
- Keep the charging port dry and do not touch water when inserting the charging cable.
- This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
- Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Warning:Do not disassemble、hit、crush or throw into fire
Do not put in the high temperature environment,the battery is not allowed to
use after soaking
Do not continue to use if the battery has serious bulging
-disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
-leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
-a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
* Model Name(HVIN): 7200WP-BT,
7100, 7300HP, 7200DHS, 7708,
Different colors, Electrical performance
and structure are consistent.
Documents / Resources
|
SuperLead 7200WPBT Bluetooth
Keyboard
[pdf] User Guide
7200WPBT Bluetooth Keyboard, 7200WPBT, Bluetooth Keyboard, Keyboard
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>