Newsmay KC12-F Motherboard User Manual

Newsmay KC12-F Motherboard

1. Motherboard Chip
   Realtek 269 chips

2. CPU
   Intel 12th/13th Gen CPU: Alder Lake-P/Raptor lake-U

3. Audio LAN Processor
   Intel I225/I226, 2.5Gbe

4. Memory
   Intel 12th Gen CPU: 2 x SODIMM DDR4 2666MHz/3200MHz
   Intel 13th Gen CPU: 2 x SODIMM DDR5 4800MHz

5. Storage

   • 1 x M.2 PCIe slot
   • 1 x M.2 2280 slot (support SATA 3.0/NVME SSD, PCIE x3 Gen3)
   • 1 x M.2 2280 slot (support NVME SSD, PCIE x4 Gen4)

Installation

1. Ensure the motherboard is compatible with your CPU and other components.
2. Install the CPU, memory modules, and storage devices according to the user manual.

Power Connection

1. Connect the DC power supply to the specified port on the motherboard.

Frequently Asked Questions (FAQ)

1. Q: What are the supported CPU generations for this motherboard?
   A: The motherboard supports Intel 12th and 13th Gen CPUs: Alder Lake-P/Raptor lake-U.

Newsmay Technology Co., Ltd

Add: 4/F, Building B, Taiyufeng industrial park, Longhua, Shenzhen
+86-755-89456786, info@newsmaytech.com

Manual

KC12-F, KC12 Motherboard Specs

Specification

KC12-F, KC12 MB SPECS

Motherboard Chip
CPU| ** Intel 12th/13th Gen CPU: Alder Lake-P/Raptor lake-U
Audio| Realtek 269 chips
LAN| Intel I225/I226, 2.5Gbe
Processor Spec**
CPU| i3-1215U, 1315U

i5-1235U/1240P, i5-1340P/1335U i7-1260P/1355U, i7-1360p/1355U

Graphics| Intel® Iris® Xe Graphics or Intel® UHD Graphics
Memory Spec
Memory| Intel 12th Gen CPU: 2 x SODIMM DDR4 2666MHz/3200MHz Intel 13th Gen CPU: 2 x SODIMM DDR5 4800MHz
Expansion Slot
WiFi slot| 1 x M.2 PCIe slot

WIFI: 802.11 b/g/n/AC/AX Bluetooth 4.0 or above

Storage| 1 x M.2 2280 slot (support SATA 3.0/NVME SSD, PCIE x3 Gen3) 1 x M.2 2280 slot (support NVME SSD, PCIE x4 Gen4)

1 x 2.5” SATAIII HDD/SSD (KC12, but KC12-F not have enough space for 2.5”HDD/SSD)

Rear I/O Interface
Power| 1 x DC (55*25),19V/3.42A or 19V4.74A
**** Display| 2 x HDMI Out 2.0 4K 60Hz

1 x DP 1.4 , thunderbolt 4,

USB| 2 x USB2.0
Network| 2 x RJ45 2500M
---|---
Front I/O Interface
USB| 4 x USB3.0 Gen1 (+ 4 x USB2.0 for KC12-F)
Thunderbolt| 1 x Thunderbolt 4
** Audio| 1 x Line Out 1 x MIC IN
Power button| 1 x Power button
Built-in Plug-in Spes**
EDP function|
1 x EDP I-PEX 30 Pin (Reserved)
Power|
1 x ATX 4Pin 12-19V (Optional)
Serial port|
1x RS232

1 x RS485 (or COM1 choose one of them)

Hard disk socket|
1x SATA3.0 interface、1x SATA power connector (4PIN)
USB header|
1 x Dual row USB2.0 pin (DuPont double row 9Pin 2.54mm)
Onboard header|
1 x Front Panel Header 9PIN (DuPont double row 9Pin 2.54mm)

1 x CPU_FAN 4PIN 5V

Audio header|
1 x Speaker 2*8Ω1W (Optional)

1 x MIC (Optional)

Other Spes
Motherboard Size| 120mm × 150mm
BIOS support| 256M flash ROM, AMI UEFI BIOS, PXE, WOL, Auto power on
Environment| Working environment| TEMP.: -10～50℃   Humidity: 5%~95% No condensation
Storage environment| TEMP.: -20~70℃   Humidity:5%~95% No condensation

Newsmay Technology Co.,ltd| www.newsmaytech.com

Motherboard Layout

Header definition

F_Panel Definition:

| PIN| Definition| PIN| Definition
---|---|---|---|---
1| HDD_LED+| 2| PWR_L ED+
3| HDD_LED-| 4| PWR_LED-
5| GND| 6| PW_ON
7| RST| 8| GND
9| GND| 10| NC

Speaker Connector
The motherboard provides a 1*4Pin speaker interface: (Pitch: 1.25mm), 8Ω1W/4Ω2W, the pin definition is as follows:

| PIN| Definition
---|---|---
1| SPL-
2| SPL+
3| SPR+
4| SPR-

USBH1 PIN Header Definition
The motherboard provides a 2*5pin USB interface (pitch: 2.54mm). The pin definition is as follows:

SATA Power Supply Interface: HDD PWR
The motherboard provides a 1*4Pin SATA power interface (pin pitch: 2.00mm). The pin definition is as follows:

| PIN| Definition
---|---|---
1| 5V
2| GND
3| GND
4| 5V

COM1, COM2 Definition (RS232)
The motherboard provides two 2*5Pin COM interfaces, pin pitch= 2.54MM, and the pin definitions are as follows:

| PIN| Definition| PIN| Definition|
---|---|---|---|---|---
1| DCDA| 2| SINA|
3| SOUTA| 4| DTRA|
|
5| GND| 6| NDSRA|
7| NRTSA| 8| NCTSA|
| 9| NRIA| 10| NC|

RS485J1 Definition (RS485/RS422)
The motherboard provides one 2*3Pin COM interface pin pitch 2.54MM, and the pin definitions are as follows:

RS SEL1 Definition (optional RS232/RS485/RS422):
The RS SEL1 jumper is used to set the transmission mode of COM1 and RS485J1. COM1 supports RS232, and RS485J1 supports two transmission modes: RS422 and RS485. You can choose the setting according to your own needs.
The default transmission mode is RS232.

Built-in EDP display interface: EDP FFC/IPEX
The motherboard provides a 30Pin EDP interface (pin pitch: 0.5mm). The pin definitions are as follows:

| PIN| Definition| PIN| Definition
---|---|---|---|---
1| NA| 16| TXP0
2| GND| 17| GND
3| NA| 18| AUX+
4| NA| 19| AUX-
5| GND| 20| GND
6| TXN3| 21| LCD_VCC 3.3V
7| TXP3| 22| LCD_VCC 3.3V
8| GND| 23| HPD
9| TXN2| 24| GND
10| TXP2| 25| GND
11| GND| 26| BL_ON
12| TXN1| 27| PWM_EDP
13| TXP1| 28| NC
| 14| GND| 29| LCD_BL_VCC 19V|
---|---|---|---|---|---
15| TXN0| 30| LCD_BL_VCC 19V

FAN Interface
The motherboard provides a 1*4Pin SATA fan interface: (Pitch: 1.25mm) The pin definition is as follows:

| PIN| Definition
---|---|---
1| PWM
2| FB
3| +5V
4| GND

ATX 4PIN Power Input Interface

Newsmay Technology Co.,ltd| www.newsmaytech.com

References

• Mini PC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>