BOSCH WNG254ABSN Washer Dryer User Manual

BOSCH WNG254ABSN Washer Dryer

Specifications:

• Model: WNG254ABSN
• Type: Washer Dryer

Product Information

The WNG254ABSN is a washer dryer designed to provide efficient washing and drying functions in one appliance. It comes with various features and programs to cater to different laundry needs.

Product Usage Instructions

1. Safety:

Ensure to follow the safety instructions provided in the manual to prevent any accidents or damage.

2. Installation and Connection:

Properly unpack the appliance, remove transit bolts, and connect it following the installation requirements mentioned in the manual.

3. Familiarizing Yourself with the Appliance:

Get to know the different parts of the appliance such as the
detergent drawer and control panel for efficient usage.

4. Before Using for the First Time:

Start an empty washing cycle before using the appliance for the first time.

5. Basic Operations:

• Switch on the appliance.
• Set a washing or drying program.
• Adjust program settings as needed.
• Load laundry into the appliance.
• Add detergent and care products.
• Start the program.
• Follow instructions for soaking, adding laundry, cancelling programs, and unloading laundry.
• Switch off the appliance after use.

6. Childproof Lock:

• Activate or deactivate the childproof lock as needed to prevent
  accidental operation by children.

7. Intelligent Dosing System:

If applicable, start the program with the intelligent dosing system for automatic dosing of detergents.

Frequently Asked Questions

• Q: How do I change the dryness level?
  • A: To change the dryness level, refer to section 9.1 in the manual for detailed instructions.
• Q: How do I cancel a washing or drying program?
  • A: Section 14.9 and 14.10 provide instructions on cancelling washing and drying programs respectively.
• Q: How do I activate the childproof lock?
  • A: Follow the steps outlined in section 15.1 of the manual to activate the childproof lock.

“`

bMogesyncRtBwehfeorwe-egshlecidcoshoebmtevmneeirnoce.eweycfoooiatumnsnr:d/

Safety

1Safety
Observe the following safety instructions. 1.1General information
¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe
for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2Intended use Only use this appliance: ¡ for washing machine-washable fabrics and hand-washable wool
in accordance with the care label. ¡ with tap water and commercially available detergents and care
products suitable for washing machines. ¡ for drying and freshening up fabrics that are washed with water
and suitable for dryers. ¡ in private households and in enclosed spaces in a domestic en-
vironment. ¡ up to an altitude of max. 4000 m above sea level. 1.3Restriction on user group This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers. Do not let children play with the appliance. Cleaning and user maintenance must not be performed by children unless they are being supervised. Keep children under the age of 3 years and pets away from the appliance.
4

Safetyen
1.4Safe installation WARNING Risk of electric shock!
Incorrect installation is dangerous. Connect and operate the appliance only in accordance with the
specifications on the rating plate. Connect the appliance to a power supply with alternating cur-
rent only via a properly installed socket with earthing. The protective conductor system of the domestic electrical in-
stallation must be properly installed. The installation must have a sufficiently large cross section. When using a residual current circuit breaker, only use a type with the mark. Never equip the appliance with an external switching device, e.g. a timer or remote control. Never connect the appliance to a circuit that is regularly switched on and off by the energy supplier. When the appliance is installed, the mains plug of the power cord must be freely accessible. If free access is not possible, an all-pole isolating switch must be installed in the permanent electrical installation according to the installation regulations. When installing the appliance, check that the power cable is not trapped or damaged. If the insulation of the power cord is damaged, this is dangerous. Never let the power cord come into contact with hot appliance parts or heat sources. Never let the power cord come into contact with sharp points or edges. Never kink, crush or modify the power cord.
WARNING Risk of fire! It is dangerous to use an extended power cord and non- approved adapters. Do not use extension cables or multiple socket strips. Only use adapters and power cords approved by the manufac-
turer.
5

enSafety
If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted. WARNING Risk of injury!
The high weight of the appliance may result in injury when lifted. Do not lift the appliance on your own.
WARNING Risk of suffocation! Children may put packaging material over their heads or wrap themselves up in it and suffocate. Keep packaging material away from children. Do not let children play with packaging material.
CAUTION Risk of injury! The appliance may vibrate or move when in use. Place the appliance on a clean, even, solid surface. Align the appliance using the appliance feet and a spirit level. If hoses and power cords have been laid incorrectly, this causes a tripping hazard. Lay hoses and power cords in such a way that there is no risk
of tripping. If the appliance is moved by holding onto protruding components, such as the appliance door, the parts may break off. Do not move the appliance by holding onto protruding parts.
CAUTION Risk of cutting! Touching sharp edges on the appliance may lead to cuts. Do not touch the sharp edges on the appliance. Wear protective gloves when installing and transporting the ap-
pliance. 1.5Safe use
WARNING Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. Never operate a damaged appliance. Never pull on the power cord to unplug the appliance. Always
unplug the appliance at the mains.
6

Safetyen
If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box and turn off the water tap.
Call customer services. Page 57 An ingress of moisture can cause an electric shock. Only use the appliance in enclosed spaces. Never expose the appliance to intense heat or humidity. Do not use steam- or high-pressure cleaners, hoses or sprays
to clean the appliance. WARNING Risk of harm to health!
Children can lock themselves in the appliance, thereby putting their lives at risk. Do not install the appliance behind a door as this may obstruct
the appliance door or prevent it from opening. With redundant appliances, unplug the power cord. Then cut
through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close.
WARNING Risk of suffocation! Children may breathe in or swallow small parts, causing them to suffocate. Keep small parts away from children. Do not let children play with small parts.
WARNING Risk of explosion! If there is coal dust or flour in the air around the appliance, this may cause an explosion. Keep the area around the appliance clean during operation.
WARNING Risk of poisoning! Detergents and care products may result in poisoning if consumed. If accidentally swallowed, seek medical advice. Keep detergents and care products out of the reach of children.
7

enSafety
WARNING Risk of explosion! Highly flammable objects such as lighters or matches may ignite during the drying process. Remove all highly flammable objects from any pockets in your
laundry before the drying process. Unwashed laundry that has come into contact with solvents, oil, wax, wax remover, paint, grease or stain remover may ignite when drying is in progress. Do not place laundry in this appliance to be dried if the laundry
has not been washed first. Rinse the laundry thoroughly with warm water and detergent be-
fore drying it in the machine. Do not use the appliance if industrial chemicals have been used
to clean the laundry beforehand. Laundry that has been pretreated with cleaning agents that contain solvents may cause an explosion in the appliance. Rinse pretreated laundry thoroughly with water before washing.
WARNING Risk of fire! If drying is interrupted early, the laundry is not cooled sufficiently and may ignite. Do not interrupt the drying programme early. If drying is interrupted early, remove the laundry immediately
and spread it out. CAUTION Risk of injury!
The covering plate may break if you stand on or climb onto the appliance. Do not stand on or climb onto the appliance. The appliance may tip over if you sit on or lean against the open door. Do not sit on or lean against the appliance door. Do not place any objects on the appliance door. Reaching into the drum while it is still turning may cause hand injuries. Wait for the drum to come to a complete stop before reaching
inside.
8

Safetyen
CAUTION Risk of scalding! When you wash at high temperatures, the detergent solution gets hot. Do not touch the hot detergent solution.
CAUTION Risk of chemical burns! If the detergent drawer is opened, detergent and care products may spray out from the appliance. Contact with eyes or skin may cause irritation. Rinse eyes and/or skin thoroughly with clean water if they come
into contact with detergents or care products. If accidentally swallowed, seek medical advice. Keep detergents and care products out of the reach of children. 1.6Safe cleaning and maintenance
WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained
specialist staff. Only use genuine spare parts when repairing the appliance. If the power cord of this appliance is damaged, it must be re-
placed by the manufacturer, the manufacturer’s Customer Service or a similarly qualified person in order to prevent any risk. An ingress of moisture can cause an electric shock. Do not use steam- or high-pressure cleaners, hoses or sprays to clean the appliance.
WARNING Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. Only use the manufacturer’s original spare parts and original ac-
cessories. WARNING Risk of poisoning!
Poisonous fumes may be given off if you use cleaning agents that contain solvents. Do not use cleaning agents that contain solvents.
9

Preventing material damage

2Preventing material Preventingmaterialdamage damage
Preventing material damage
ATTENTION! The functionality of the appliance may be impaired if you use the wrong quantity of fabric softener, detergent, care product or cleaning agent. Follow the dosage recommenda-
tions from the manufacturer. Exceeding the maximum load capacity impairs the function of the appliance. Observe the maximum load capa-
city for each programme and do not exceed it. “Programmes”, Page 26 Foam and foam rubber may deform or melt during the drying process. Do not dry laundry that contains foam or foam rubber. The appliance is secured for transportation using transit bolts. Transit bolts which have not been removed may result in material damage and damage to the appliance. Before starting up the appliance, remove the transit bolts completely and keep them in a safe place. Before transport, fit the transit bolts fully in order to prevent damage in transit. Material damage may be caused if the water inlet hose is connected incorrectly. Tighten the screw connections on the water inlet until they are handtight. Connect the water inlet hose directly to the water tap, without any additional connecting elements such as adapters, extensions or valves. Ensure that the inner diameter of the water tap is at least 17 mm.

Make sure that the length of the thread on the connection to the water tap is at least 10 mm.
If the water pressure is too high or too low, the appliance may not be able to operate properly. Ensure that the water pressure in
the water supply system is at least 100 kPa (1 bar) and max. 1000 kPa (10 bar). If the water pressure exceeds the maximum value specified, a pressure- reducing valve must be installed between the drinking water connection and the hose set of the appliance. Do not connect the appliance to the mixer tap of an unpressurised hot-water boiler. Modified or damaged water hoses may result in material damage and damage to the appliance. Never kink, crush, modify or cut through water hoses. Only use the water hoses supplied with the appliance or genuine spare hoses. Never re-use water hoses that have been used before. Operating the appliance using water that is dirty or too hot may lead to material damage and damage to the appliance. Only operate the appliance with cold mains water. Unsuitable cleaning products may damage the surfaces of the appliance. Do not use harsh or abrasive detergents. Do not use cleaning products with a high alcohol content. Do not use hard scouring pads or cleaning sponges. Clean the appliance with nothing but water and a soft, damp cloth.

10

Environmental protection and saving energy

Remove all detergent residue, spray residue or other residues immediately if they come into contact with the appliance.
3Environmental protec- Environmentalprotectionandsavingenergy tion and saving energy
Environmental protection and saving energy
3.1Disposing of packaging
The packaging materials are environmentally compatible and can be recycled. Sort the individual components by
type and dispose of them separately.
3.2Save energy and conserve resources
If you follow these instructions, your appliance will use less electricity and less water. Choose programmes with low temperatures and longer wash times and use maximum load capacity. a Energy consumption and water
consumption is most efficient. Add detergent based on the laundry’s degree of soiling. a For light to normal soiling, a smal-
ler amount of detergent is sufficient. Observe the dosage recommendation from the detergent manufacturer. Reduce the washing temperature for lightly and normally soiled laundry. a At lower temperatures, the appliance consumes less energy. For light to normal soiling, lower temperatures than indicated on the care label are also sufficient.

Set the maximum spin speed if you want to dry the laundry in the appliance afterwards. a The drier the laundry, the shorter
the programme duration when drying which, in turn, reduces energy consumption. A higher spin speed reduces the residual moisture in the laundry and increases the volume of the spin noise.
Wash the laundry without prewash. a Washing with prewash increases
the programme duration and increases energy and water consumption.
The appliance has a continuous automatic load adjustment function. a Depending on the type of fabric
and load capacity, the continuous automatic load adjustment function optimally adjusts the water consumption and programme duration.
The appliance comes with an AquaSensor. a During the rinse cycle, the Aqua-
Sensor checks the degree of turbidity of the rinsing water, and adjusts the duration and number of rinse cycles accordingly.
3.3Energy saving mode
If you do not use the appliance for an extended period, it automatically switches to energy-saving mode. Energy-saving mode ends when you use the appliance again.

11

Installation and connection

4Installation and con- Installationandconnection nection
Installation and connection
4.1Unpacking the appliance
ATTENTION! Objects remaining in the drum that are not designed for operation with the appliance may cause material damage and damage to the appliance. Remove these objects, along with
all supplied accessories, from the drum before starting the appliance. 1. Remove any packaging and protective covers completely from the appliance. “Disposing of packaging”, Page 11 2. Check the appliance for visible damage. 3. Open the door. 4. Remove any accessories from the drum. 5. Close the door.
4.2Contents of package
After unpacking all parts, check for any damage in transit and completeness of the delivery. ATTENTION! If the appliance is operated with incomplete or defective accessories, the appliance may not be able to operate properly, or this may result in material damage or damage to the appliance. Do not operate the appliance with
incomplete or defective accessories.

Replace the accessories in question before operating the appliance. “Accessories”, Page 30
Note: The appliance has been tested at the factory to check it is in working order. As a result, water stains may remain in the appliance. These marks will disappear after the first wash cycle. The delivery consists of the following: ¡ Washer dryer ¡ Accompanying documents ¡ Transit bolts
“Removing the transit bolts”, Page 13 ¡ Cover caps ¡ Connection adapter ¡ Water inlet hose “Connecting the water inlet hose”, Page 14
4.3Requirements for the installation location
WARNING Risk of electric shock! The appliance contains live parts. Touching live parts is dangerous. Do not operate the appliance
without a cover cap.
WARNING Risk of injury! When using the appliance on a base, the appliance may tip over. Always secure the feet of the appli-
ance to a base using the manufacturer’s fixing brackets Page 30 before using the appliance for the first time.

12

ATTENTION! If residual water in the appliance freezes, this may cause damage to the appliance. Do not install or operate this appli-
ance anywhere that is liable to experience frost or outdoors. If the appliance is tilted at an angle greater than 40°, residual water may leak out of the appliance and cause material damage. Tilt the appliance carefully. Transport the appliance in an upright position.

Installation loca- Requirements tion

Base

Secure the appliance with fixing brackets Page 30.

Wooden joist floor Kitchen unit

Place the appliance on a waterresistant wooden board (minimum thickness of 30 mm) which is screwed tightly to the floor. Only install the appliance underneath a continuous worktop that is securely connected to adjacent cabinets. Required niche width: 60 cm.

Installation and connectionen

Installation loca- Requirements tion

Against a wall

Do not trap the power cord or the hoses between the wall and the appliance.

4.4Removing the transit bolts
The appliance is secured for transportation using transit bolts on the rear of the appliance. Note: Keep the transit bolt screws and the sleeves in a safe place for future transport. “Inserting the transit bolts”, Page 56
1. Pull the hoses out of the holders.

13

enInstallation and connection 2. Unscrew and remove all of
the screws for the 4 transit bolts using a WAF 13 wrench.

5. Put on the 4 cover caps.

3. Remove the power cable from the holder.

6. Push the 4 cover caps downwards.

4. Remove the 4 sleeves.

Note: To install the transit bolts to transport the appliance, perform these steps again in the reverse order.
4.5Connecting the appliance
Connecting the water inlet hose 1. Connect the water inlet hose.

14

2. Connect the water inlet hose to a tap (26.4 mm = 3/4″).

Installation and connectionen

Siphon

Secure the connection point with a (24­40 mm) hose clamp.

3. When connecting to a 21 mm = ½” tap, first fit the adapter with a sealing washer.

Sink

Fix and secure

the water outlet

hose with an el-

bow.

“Accessories”,

Page 30

Plastic pipe with rubber sleeve

Fix and secure the water outlet hose with an elbow. “Accessories”, Page 30

4. Open the water tap carefully and check that the connection points are tight.
Water outlet connection types This information is intended to help you to connect this appliance to the water outlet.
ATTENTION! When draining, the water outlet hose is subject to water pressure and may come loose from the installed connection point. Secure the water outlet hose
against unintentional loosening.
Note: Observe the draining heights. The draining heights are: minimum: 60 cm, maximum: 100 cm

Connecting the appliance to the electricity supply Note: Your electrical domestic installation for this appliance must comply with the local legal provisions and safety regulations, and should include a residual current circuitbreaker. 1. Insert the mains plug of the appli-
ance’s power cable in a socket nearby. The connection details of the appliance can be found under Technical data Page 59. 2. Check the mains plug is inserted properly.
15

enInstallation and connection
4.6Aligning the appliance
In order to reduce noise and vibration and to prevent the appliance from moving, align the appliance correctly. 1. Use a WAF 17 wrench to loosen
the lock nuts in a clockwise direction.

3. Use a WAF 17 wrench to tighten the lock nuts against the housing until they are hand-tight.

In doing so, hold the foot tight and do not adjust its height. 2. To align the appliance, turn the appliance feet. Check that the appliance is level using a spirit level.

All appliance feet must stand firmly on the ground.

16

Familiarising yourself with your appliance

5Familiarising yourself with your appliance Familiarisingyourselfwithyourappliance
Familiarising yourself with your appliance
5.1Appliance
You can find an overview of the parts of your appliance here.

3

4

56

2

7

7

1

On certain models, specific details such as the colour and shape may differ from those pictured.

1

Maintenance flap for the drain pump Page 40

2 Door

3 Detergent drawer Page 17

4 Control panel Page 18

5 Water outlet hose Page 15

6 Power cord Page 15

7 Transit bolts Page 13

5.2Detergent drawer
Note: Observe the manufacturer’s instructions on the use and dosage of the detergent and care product and the information in the programme descriptions.

17

enFamiliarising yourself with your appliance
1 2 3

Manual dosing compartment
: Dispenser for fabric softener
: Dispenser for liquid detergent

123

5.3Control panel
You can use the control panel to configure all functions of your appliance and to obtain information about the operating status.

2

3

4

1

1

4

1 Programmes Page 26

2

Programme selector Page 31

3 Display Page 20

4 Buttons Page 23

18

Before using for the first time

Prepare the appliance for use. Beforeusingforthefirsttime
6.1Starting an empty washing cycle
Your appliance was inspected thoroughly before leaving the factory. To remove any residual water, run the first wash cycle without any laundry. 1. Turn the programme selector to
Bomull 90°(Cotton 90°). 2. Close the door. 3. Pull out the detergent drawer. 4. Add washing powder that contains
a bleaching agent to the manual dosing compartment.

Before using for the first timeen 7. Start the first wash cycle or set the
programme selector to Av to switch off the appliance. “Basic operation”, Page 31

To prevent foaming, use only half of the amount of detergent recommended by the detergent manufacturer for light soiling. Do not use detergent suitable for woollens or delicates. 5. Push in the detergent drawer. 6. Press to start the programme. a The display shows the remaining programme duration. a After the programme has ended, the display shows: End.
19

enDisplay
7Display Display
The Display display shows the current settings, options or relevant information.

Example: Display Display 0:40 1 +8h 1 6.0 1
– 1400
– 90

1 Example 20

Description Expected programme duration or programme time remaining in hours and minutes. Program end time “Buttons”, Page 23 Recommendation for the maximum load capacity for the selected program in kg. Set spin speed in rpm. “Buttons”, Page 23
: No spin cycle, draining only Set temperature in °C. “Buttons”, Page 23
(cold) Start, cancel or pause ¡ Lights up: The programme is running and can be can-
celled or paused. ¡ Flashes: The programme can be started or continued. Prewash Programme status Wash Programme status Rinse Programme status

Display
End
Hot
– –

1 Example

Displayen
Description Spin Programme status Program end Programme status Drying Programme status Crease-reduction function Programme status ¡ Lights up: The childproof lock is activated. ¡ Flashes: The childproof lock is activated and the appli-
ance has been operated. “Deactivating the childproof lock”, Page 34 The crease-reduction function is activated. “Buttons”, Page 23 Prewash is activated. “Buttons”, Page 23 The cooling process cools the laundry for a few minutes while the drum is rotating, in order to avoid damage to the laundry. Note: Do not interrupt the cooling process, and wait for the door lock to open. Rinse Hold is activated. Shortened programme length is activated. “Buttons”, Page 23 The dryness level is activated. The dryness level is activated. The dryness level is activated. Flashes: Drum cleaning is required. Run the Bomull 90° (Cotton 90°) programme for cleaning and caring for the drum and the outer tub. “Cleaning the drum”, Page 38 ¡ Lights up: The intelligent dosing system for liquid detergent is activated. ¡ Flashes: The fill level of the dispenser is below the minimum level. “Intelligent dosing system”, Page 34 (liquid detergent)

21

enDisplay Display
50 ml1
E:35 / -101 1 Example

Description ¡ Lights up: The intelligent dosing system for fabric
softener is activated. ¡ Flashes: The fill level of the dispenser is below the min-
imum level. “Intelligent dosing system”, Page 34 (fabric softener) Basic dosage for detergent or fabric softener. “Basic dosage”, Page 35 ¡ Lights up: The door is locked and cannot be opened. ¡ Flashes: The door is not closed properly. ¡ Off: The door is unlocked and can be opened. ¡ No water pressure. ¡ The water pressure from the tap is too low. The detergent drawer has not been pushed in fully. Error code, error display, signal. “Troubleshooting”, Page 44

22

Buttonsen

8Buttons Buttons

The Buttons selection of programme settings depends on the programme that is set.

Button

Selection – 90 – 1400
¡ Start ¡ Cancel ¡ Pause Up to 24 hours
¡ Activate ¡ Deactivate ¡ Activate ¡ Deactivate
¡ Activate ¡ Deactivate

Description Adjust the temperature. Set temperature in °C. Adjust the spin speed or deactivate the spin cycle. Set spin speed in rpm. If is selected, the water is drained and the spin cycle is deactivated. The laundry stays wet inside the drum. Start, cancel or pause the programme.
Set the programme end time. The programme duration is already included in the set number of hours. Once the programme has started, the programme duration is displayed. Activate or deactivate a shorter programme duration. Note: Energy consumption increases. The washing result is not affected by this. Activate or deactivate prewash, e.g. for washing heavily soiled laundry. Note: If the intelligent dosing system is activated, the detergent will be dispensed automatically for the prewash and the main wash. If the intelligent dosing system is deactivated, place the detergent for the prewash directly in the drum. Activate or deactivate the reduced creasing programme. In order to reduce creasing in the laundry, the spin cycle and the spin speed are adapted. Note: The laundry has a higher residual moisture after washing. To reduce creasing, hang up the laundry immediately after washing.

23

enButtons Button
and
i-DOS

Selection ¡ Activate ¡ Deactivate
¡ Activate ¡ Deactivate ¡ Basic dosage

¡ ¡ ¡

Description “Childproof lock”, Page 33
Briefly press the button to activate or deactivate the intelligent dosing system for fabric softener or liquid detergent . Press the button for approx. three seconds to set the basic dosage. “Intelligent dosing system”, Page 34 The dryness level defines how damp or dry the laundry is after the programme ends.

24

Dryness level

9Dryness level Drynesslevel
InDrynesslevel some programmes, a dryness level is predefined. The dryness level defines how dry or damp your laundry is after the programme ends.

Dryness level Laundry

Drying result

Multi-layered, thick laundry The laundry is dry.

that does not dry readily.

Normal, single-layered

The laundry is dry.

laundry.

Normal, single-layered

The laundry is still a little damp

laundry

after drying.

To prevent creasing, iron the laun-

dry immediately after drying or

hang up the laundry while it is still

damp.

9.1Changing the dryness level
For some programmes, you can change the dryness level so that your laundry will be drier or more damp. 1. Set a washing and drying pro-
gramme or a drying programme. “Programmes”, Page 26 a The display shows the specified dryness level. 2. Press . a The display shows: , or .

25

enProgrammes

10Programmes Programmes

Programmes
Note: The laundry’s care labels provide you with additional information on programme selection.

Programme Description

Bomull(Cotton)

Wash hard-wearing items made of cotton, linen or blended fabrics. Also suitable as a short programme for normally soiled laundry when you activate . Programme setting: ¡ Max. 90 °C ¡ Max. 1400 rpm

Eco 40-60

Wash items made from cotton, linen or blended fabrics. Note: Fabrics which can be washed from 40 °C up to 60 °C as per the care symbol can be washed together. The washing performance corresponds to the best possible washing performance class according to the legal requirements. For this programme, the washing temperature is automatically adjusted depending on the load size, in order to achieve the best possible energy efficiency with the best possible washing result. You cannot change the washing temperature. Programme setting: Note: The temperature cannot be adjusted in this programme and is set automatically. ¡ Max. – °C ¡ Max. 1400 rpm

Syntet(Easy Care)

Wash items made from synthetic or blended fabrics. Programme setting: ¡ Max. 60 °C ¡ Max. 1400 rpm

1

activated

2 Drying not possible

3 Washing not possible

Max. load (kg) Wash 10.0 5.0 1 10.5
4.0

Max. load (kg) Drying 6.0 6.0
2.5

26

Programmesen

Programme Description

Max. load (kg) Wash

Mix

Wash items made from cotton, linen, or syn- 4.0

thetic or blended fabrics.

Suitable for lightly soiled laundry.

Programme setting:

¡ Max. 60 °C

¡ Max. 1400 rpm

Fintvätt/

Wash delicate, washable items made from

2.0

Silke(Delicate/ silk, viscose and synthetic fabrics.

Silk)

Use a detergent that is suitable for delicates

or silk.

Note: Wash especially delicate items or items with hooks, eyelets or clips in a mesh laundry bag.

Programme setting: ¡ Max. 40 °C

¡ Max. 800 rpm

Ylle/

Hand- or machine-washable items that are

2.0

Handtvätt

made from wool or contain wool.

(Wool/Hand- To prevent the laundry from shrinking, the

wash)

drum moves the items very gently with long

pauses.

Use a detergent that is suitable for wool.

Programme setting:

¡ Max. 40 °C

¡ Max. 800 rpm

Sköljning(Rinse)

Rinse and then spin the laundry, and drain the ­ water. Programme setting: Max. 1400 rpm

Centrif./Urpumpning(Spin/ Drain)

Spin and drain the water.

­

If you only want to drain the water, activate .

The laundry is not spun.

Programme setting: Max. 1400 rpm

Automatisk Wash delicate items made from cotton, or

3.5

30°C

synthetic or blended fabrics.

Gentle laundry care.

1

activated

2 Drying not possible

3 Washing not possible

Max. load (kg) Drying 2.5
­2
1.0
­ ­ ­2

27

enProgrammes

Programme Description

Max. load (kg) Wash

The degree of soiling and the type of fabric are automatically detected. The washing process is adapted.

Note: The temperature and spin speed cannot be adjusted in this programme and are set automatically. The maximum temperature is 30 °C. The maximum spin speed is 1000 rpm.

Skontorkning(Gentl e Dry)

Dry items made from synthetic or blended fab- ­3 rics. Gentle programme with low temperatures for delicate fabrics.

Intensivt- Dry items made from cotton or linen.

­3

orkning(In-

Intensive programme with temperatures for

tensive Dry) hard-wearing fabrics.

Hygiene Care Pre-treat delicate fabrics hygienically.

4.0

The fabrics are pre-treated with hot steam up

to 65 °C in order to kill bacteria.

After the fabrics have been pre-treated, they

are washed at low temperatures.

Programme setting:

¡ Max. 30 °C

¡ Max. 1400 rpm

Iron Assist

Reduce creases and airborne odours in suits ­3 and fabrics made of cotton and down.

Tip: To prevent creasing, remove the laundry immediately after the programme has ended.

Notes ¡ The laundry is not dried or washed. ¡ If you use the Iron Assist programme of-
ten without washing in between, this may cause odours in the appliance.

Snabb 15′ / Tvätt & Tork

Wash and dry items made from cotton, linen, 2.0 or synthetic or blended fabrics. Short programme for small items of lightly soiled laundry.

1

activated

2 Drying not possible

3 Washing not possible

Max. load (kg) Drying
2.5 6.0 2.5
1.0
1.0

28

Programme Description

60′(Rapid 15’/ Programme setting:

Wash & Dry ¡ Max. 40 °C

60′)

¡ Max. 1200 rpm

1

activated

2 Drying not possible

3 Washing not possible

Programmesen

Max. load (kg) Wash

Max. load (kg) Drying

29

enAccessories

11Accessories Accessories

Use Accessories original accessories. These have been made especially for your appliance. Note: Some accessories are available in other colours. Contact “Customer Service”, Page 57.

Water inlet hose extension Fixing brackets Elbow Platform
Washing machine cleaners

Use

Order num-

ber

Extend the water inlet hose for cold water WMZ2381 or AquaStop (approx. 2.50 m).

Improves the stability of the appliance.

WMZ2200

Secure the water outlet hose in place.

00655300

Install the appliance at a raised height so WMZPthat it can be easily loaded and unloaded. W20W

Cleaning products for maintaining the ap- 00311929 pliance interior.

12Laundry Laundry
Laundry
12.1Preparing the laundry
ATTENTION! Objects remaining in the laundry may damage the laundry and the drum. Remove all items from any pock-
ets in your laundry before using the appliance. Note The appliance and fabrics are protected when you prepare your laundry. ¡ Brush off sand and soil ¡ Sort the laundry according to colour and textiles and observe the care labels ¡ Close all zips, Velcro fasteners, hooks and eyes ¡ Tie cloth belts, cloth straps and cords together

¡ Remove curtain fittings and lead strips
¡ Wash small or particularly delicate items in a mesh washing bag
¡ Wash large and small items of laundry together
¡ Wash laundry with fresh stains immediately
¡ Pretreat laundry with dried stains and wash several times
¡ Load the laundry unfolded into the drum
¡ Spin the laundry before drying

30

13Detergents and care Detergentsandcareproducts products
The manufacturer’s instructions for Detergentsandcareproducts use and dosage can be found on the packaging. Notes ¡ When using liquid detergents, only
use liquid detergents that are selfflowing ¡ Do not mix different liquid detergents ¡ Do not mix detergent and fabric softener ¡ Do not use products that have expired or are highly congealed ¡ Do not use products containing solvents, caustic agents or volatile substances ¡ Use dyes sparingly as salt may damage stainless steel ¡ Do not use color-bleaching agents in the appliance ¡ Do not pour vinegar into the dispensers Page 35 of the intelligent dosing system

Basic operation

Basic operation
14.1Switching on the appliance
Requirement: The appliance has been correctly installed and connected. “Installation and connection”, Page 12 Turn the programme selector to a
programme. a An audible function test is carried
out. Note: The lighting for the drum goes out automatically.

Detergents and care productsen
14.2Setting a programme
1. Turn the programme selector and set the required programme. “Programmes”, Page 26
2. If required, adjust the programme settings. “Adjusting the programme settings”, Page 31
14.3Adjusting the programme settings
Requirement: A programme is set. “Setting a programme”, Page 31 Adjust the programme settings.
“Buttons”, Page 23 Notes ¡ The programme settings are not
saved permanently for the programme. ¡ The setting is saved if you activate or deactivate the intelligent dosing system.
14.4Loading laundry
Note: To prevent creasing, note the maximum load for the programmes. “Programmes”, Page 26 Requirements ¡ The laundry is prepared and sor-
ted. “Laundry”, Page 30 ¡ The drum is empty. 1. Open the door. 2. Place the laundry in the drum. 3. Close the door. Ensure that there is no laundry trapped in the door.

31

enBasic operation
14.5Adding detergent and care product
For programmes in which intelligent dosing is not possible or desirable, you can add detergent manually. Tip: In addition to intelligent dosing, you can also add additional care product for laundry, e.g. stain remover, starch or bleach, to the manual dosing compartment. Do not add any additional detergent to the manual dosing compartment to avoid overdosage and/or foaming. Note: Observe the information about detergents and care products Page 31. 1. Pull out the detergent drawer. 2. Pour in detergent.
“Detergent drawer”, Page 17 3. If required, add the care product. 4. Push in the detergent drawer.
14.6Starting the programme
Requirement: A programme is set. “Setting a programme”, Page 31 1. Press . a The drum rotates and load detec-
tion takes place. This can take up to 2 minutes, after which water enters the drum. a The display shows the programme duration or the programme end time. a After the programme has ended, the display shows: End. 2. If the display shows , the laundry is not spun. The water is pumped out after the rinse cycle.
32

Notes ¡ If you do not remove the laundry
once the programme has ended, the crease-reduction function starts after 15 minutes and takes approx. 30 minutes. The display shows 0 00 and End alternately, and appears. Press any button on the display to cancel the crease-reduction programme and to remove the laundry. ¡ If “Hot” appears, the appliance cools the laundry. When “Hot” goes out, the laundry has cooled down.
14.7Soaking laundry
Note: No additional detergent is required. The washing solution is then used for washing. 1. Start the programme. 2. To pause the programme, after ap-
prox. 10 minutes, press . 3. To resume the programme, after
the desired soaking time, press .
14.8Adding laundry
After the programme starts, you can remove or add laundry depending on the programme status. 1. Press .
During the washing cycle, the appliance pauses. During the drying cycle, the appliance checks whether it is possible to add laundry. Note: If you want to add laundry, follow the instructions on the display. “Display”, Page 22 2. Open the door. 3. Add or remove laundry. 4. Close the door.

5. Press .
14.9Cancelling the washing programme
1. Press . 2. Open the door.
The appliance door remains locked for safety reasons if the temperature and water levels are high. ­ If the temperature is high, start
the Sköljning(Rinse) programme. ­ If the water level is high, start the Centrif.(Spin) programme or select a suitable programme for draining. “Programmes”, Page 26 3. Remove the laundry. “Unloading the laundry”, Page 33
14.10Cancelling the drying programme
Turn the programme selector to set any other programme.
a The door lock opens automatically after a cooling period of a few minutes.
14.11Resuming the programme when the programme status is Rinse Hold
Requirements ¡ Rinse Stop is activated. ¡ The last rinse cycle of the set pro-
gramme has ended and the laundry is in the rinsing water. 1. Set the Centrif.(Spin) programme or a programme for draining the water. “Programmes”, Page 26

Childproof locken 2. Press .
14.12Unloading the laundry
1. Open the door. 2. Remove the laundry from the
drum.
14.13Switching off the appliance
1. Turn the programme selector to Av.
2. Turn off the tap. 3. Wipe the rubber gasket dry and re-
move any foreign objects.
4. Leave the appliance door and detergent drawer open so that residual water can evaporate.
15Childproof lock Childprooflock
Secure Childprooflock your appliance against being operated unintentionally using the controls.
15.1Activating the childproof lock
Press and hold the two and buttons for approx. 3 seconds.
a The display shows . a The control elements are locked.
33

enIntelligent dosing system a The childproof lock remains active
even after the appliance has been switched off and in the event of a power cut.
15.2Deactivating the childproof lock
Requirement: To deactivate the childproof lock, the appliance must be switched on. Press and hold the two and
buttons for approx. 3 seconds. a goes out in the display.
16Intelligent dosing sys- Intelligentdosingsystem tem
The optimum quantities of liquid de- Intelligentdosingsystem tergent and fabric softener are dispensed automatically depending on the programme and settings.
16.1Starting the programme with intelligent dosing system
If you do not want to dose liquid detergent and fabric softener manually, use the intelligent dosing system. This function is available depending on the selected programme and is activated automatically. Note If you are using the intelligent dosing system, do not add additional detergent or fabric softener into the compartment for manual dosing. “Adding detergent and care product”, Page 32 If you want to dose manually for a set programme, observe the following information: ¡ Deactivate the intelligent dosing
system before starting the programme. The selected settings are 34

retained even after the appliance has been switched off. “Buttons”, Page 24 ¡ Pour detergent or fabric softener into the compartment for manual dosing. “Adding detergent and care product”, Page 32 ¡ Activate the intelligent dosing system once the programme has ended. “Buttons”, Page 24 Requirements ¡ The laundry is prepared. “Preparing the laundry”, Page 30 ¡ The laundry is sorted. ¡ The laundry is placed in the appliance. “Loading laundry”, Page 31 ¡ The programme is set. “Setting a programme”, Page 31 ¡ The intelligent dosing system is activated. “Display”, Page 22 1. Fill the dispensers. “Filling the dispensers”, Page 35 To replace the contents of the dispenser with another product, clean the detergent drawer. “Cleaning the detergent drawer”, Page 39 2. If required, adjust the contents of the dispenser. 3. If required, adjust the basic dosage Page 35. 4. If required, adjust the programme settings. “Adjusting the programme settings”, Page 31 5. Start the programme. “Starting the programme”, Page 32 6. Remove the laundry. “Unloading the laundry”, Page 33

16.2Filling the dispensers
If you want to use the intelligent dosing system or if the appliance displays a notification during operation of the appliance, fill the dispensers. Note: Fill the dispensers only with suitable detergent and care products Page 31. If you want to add more liquid detergent or fabric softener in the dispenser, use the same product. If you want to replace the liquid detergent or fabric softener in the dispenser with another product, clean the detergent drawer beforehand. “Cleaning the detergent drawer”, Page 39 Requirement: The display shows a notification to fill the dispenser. “Display”, Page 22 1. Pull out the detergent drawer. 2. Open the dispenser cover.

Intelligent dosing systemen 3. Pour liquid detergent and fabric
softener into the relevant dispensers. “Detergent drawer”, Page 17
Do not exceed the marking for the maximum fill level when filling. 4. Close the dispenser cover. Note: To prevent the liquid detergent or fabric softener from drying out, close the dispenser cover immediately after filling. 5. If required, pour washing aid into the compartment for manual dosing. “Adding detergent and care product”, Page 32 6. Push in the detergent drawer. 7. Adjust the basic dosage Page 35.
16.3Basic dosage
The basic dosage depends on the manufacturer’s instructions for the detergent, the water hardness and the degree of soiling of the laundry. Always set a basic dosage that corresponds to the dosage for a standard load of 4.5 kg. Adjusting the basic dosage 1. Press and hold i-DOS for ap-
prox. 3 seconds. a The display shows the basic
dosage set for . 35

enIntelligent dosing system 2. To adjust the basic dosage for ,
press i-DOS. 3. To adjust the setting, press . 4. To end the setting process, wait
briefly.
36

Basic settings

17Basic settings Basicsettings
You Basicsettings can configure the basic settings for your appliance to meet your needs.
17.1Overview of the basic settings

Basic setting Programme position

End signal

2

Button signal 3

Drum cleaning 4 reminder Programme 5 counter 1 Example

Value
0 (off) 1 (quiet) 2 (medium) 3 (loud) 4 (very loud) 0 (off) 1 (quiet) 2 (medium) 3 (loud) 4 (very loud) On OFF 421

Description Set the volume of the signal at the end of the programme.
The volume of the audible signal emitted when the buttons are pressed.
Activate or deactivate the reminder to clean the drum. Display the number of finished programmes.

37

enCleaning and servicing
17.2Changing the basic settings
1. Set the programme selector to position 1.
2. Press and, at the same time, turn the programme selector to position 2.
a The display shows the current value.
3. Set the programme selector to the required position. “Overview of the basic settings”, Page 37
4. To change the value, press . 5. To save the changes, switch off
the appliance.

18Cleaning and servi- Cleaningandservicing cing
To keep your appliance working effi- Cleaningandservicing ciently for a long time, it is important to clean and maintain it carefully.
18.1Cleaning the drum
CAUTION Risk of injury! Permanently washing at low temperatures and a lack of ventilation for the appliance may damage the drum and cause injury. Regularly run a programme for
cleaning the drum or wash at temperatures of at least 60 °C. Leave the appliance to dry after every operation with the door open, and leave the detergent drawer to dry. Run the Bomull 90°(Cotton 90°) programme without laundry and with a cleaning agent for caring for the inside of the appliance “Accessories”, Page 30 or with washing powder that contains bleach.

38

18.2Cleaning the detergent drawer
If you want to replace the liquid detergent or fabric softener in the dispenser with another product or if the detergent drawer is dirty, clean the detergent dispenser. ATTENTION! The pump unit contains electrical components. Electrical components may be damaged if they come into contact with liquids. Do not clean the pump unit in the
dishwasher and do not immerse it in water. Protect the electrical connection on the rear against water, detergent and fabric softener residue. 1. Switch off the appliance. “Switching off the appliance”, Page 33 2. Pull out the detergent drawer. 3. Press down on the insert and remove the detergent drawer.

Cleaning and servicingen 4. Remove the pump unit.
5. Unclip the detergent drawer cover and remove it.
6. Empty the detergent drawer.

39

enCleaning and servicing 7. Clean the pump unit with a damp
cloth.

8. Clean the detergent drawer and the cover with a soft, damp cloth or hand shower.

10.Clean the housing of the detergent drawer in the appliance.

9. Dry the detergent drawer, cover and pump unit and reinsert them.

11.Push in the detergent drawer.
18.3Cleaning the drain pump
Clean the drain pump regularly, at least once a year, as well as in the event of faults, e.g. blockages or rattling noises. Emptying the drain pump 1. Turn off the tap. 2. Switch off the appliance.
“Switching off the appliance”, Page 33 3. Disconnect the appliance’s mains plug from the power supply.

40

4. Open and remove the maintenance flap.

Cleaning and servicingen

CAUTION – Risk of scalding!

When you wash at high temperat-

ures, the detergent solution gets

hot.

Do not touch the hot detergent solution.

To allow the detergent solution to flow out into the container, remove the sealing cap.

5. Slide a sufficiently large container under the opening.

8. Firmly press on the sealing cap. 6. Take the drain hose out of the
holder. 9. Insert the drain hose into the holder.

41

enCleaning and servicing
Cleaning the drain pump Requirement: The drain pump is empty. Page 40 1. Since water may remain in the
drain pump, unscrew the pump cap carefully.

4. Insert the pump cap.

5. Screw the pump cap as far as it will go.
2. Clean the interior, the thread on the pump cap and the pump housing.

3. Ensure that both impellers can turn.

The handle on the pump cap must be in a vertical position. 6. Insert and close the maintenance flap.

42

18.4Cleaning the intake opening in the rubber gasket
Regularly check the intake opening in the rubber gasket for any blockages and clean the intake opening. 1. Open the appliance door. 2. Remove any blockages from the
intake opening.

Cleaning and servicingen

Note: Do not use any sharp or pointed objects.

43

Troubleshooting

19Troubleshooting Troubleshooting
You Troubleshooting can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs.

WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist
staff. Only use genuine spare parts when repairing the appliance. If the power cord of this appliance is damaged, it must be replaced by the
manufacturer, the manufacturer’s Customer Service or a similarly qualified person in order to prevent any risk.

Fault The display goes out and flashes. “E:10 / -00 / -10 / -20”
“E:30 / -80”

Cause and troubleshooting Energy-saving mode is active Press any button. a The display lights up again. The pump for the intelligent dosing system is blocked. 1. Switch off the appliance. 2. Clean the pump unit.
“Cleaning the detergent drawer”, Page 39 3. Switch the appliance on. 4. If the display appears again after you clean the
pump unit, call customer service. “Customer Service”, Page 57
Note: You can deactivate and manually dose the intelligent dosing system until the fault is rectified. Drain pump is blocked. “Cleaning the drain pump”, Page 40 The pump cap is not fully screwed in. Ensure that the pump cap is screwed in all the way
into the appliance. The handle on the pump cap must be in a vertical position. “Cleaning the drain pump”, Page 42
Drain pipe or water outlet hose is blocked. Clean the drain pipe and the water outlet hose. Drain pipe or water drain hose is caught or jammed. Ensure that the drain pipe and water drain hose are
not kinked or trapped.
The water outlet hose is connected too high.

44

Troubleshootingen

Fault “E:30 / -80”
“H:32” “E:30 / -10” and/or

Cause and troubleshooting Install the water outlet hose at a maximum height of
1 metre.
Unapproved extension installed on the water drain hose. Remove any unapproved extensions from the water
hose. “Connecting the appliance”, Page 14
Detergent dosage is too high. Immediate measure: Mix one tablespoon of fabric
softener with 0.5 litres of water and pour the mixture into the compartment for manual dosing (not for outdoor clothing, sportswear or items stuffed with down). If intelligent dosing is activated, reduce the basic dosage Page 35. If you dose manually, reduce the amount of detergent for the next washing cycle with the same load.
The unbalanced load detection system has interrupted the spin cycle because the laundry is unevenly distributed. Redistribute the laundry in the drum. Note: Where possible, mix large and small items in the drum. Different sized items of laundry distribute themselves better during the spin cycle. The water pressure is low. No remedial action possible. The filters in the water inflow are blocked. Clean the filters in the water inflow. The tap is turned off. Turn on the tap. The water inlet hose is kinked or jammed. Ensure that the water inlet hose is not kinked or
jammed.
Water level measurement system is defective. Note: With the error message, the appliance starts a draining process. 1. First wait approx. 5 minutes until the drain process
ends. 2. To reset the error message, switch the appliance
off. 3. Switch the appliance back on.

45

enTroubleshooting

Fault “E:30 / -10” and/or

Cause and troubleshooting 4. If the error message is displayed again, call cus-
tomer service. “Customer Service”, Page 57

The detergent drawer has not been pushed in fully. Push in the detergent drawer until the symbol goes
out.

The pump unit is not inserted. 1. Insert the pump unit into the detergent drawer.
“Cleaning the detergent drawer”, Page 39 2. Push in the detergent drawer until the symbol goes
out.

lights up.

The temperature is too high. Wait until the temperature has dropped. “Cancelling the washing programme”, Page 33 Water level is too high. Select a suitable programme for draining.
“Programmes”, Page 26

flashes. “Hot” and the drum rotates.

Door is not closed. Close the door. Laundry is caught in the door. Remove any trapped laundry. Cooling process active. 1. Not a fault. 2. Do not change the programme during the cooling
process.

Note: The cooling process takes up to 10 minutes. You can continue to operate the appliance.

Drum cleaning is required.

“Cleaning the drum”, Page 38

“H:95” lights up altern- The water pressure is low.

ately with End.

See

“E:30 / -10 and/or “, Page 46

46

Troubleshootingen

Fault All other error codes.
The drying time is too long. Creasing.
The appliance is not working. The programme does not start.

Cause and troubleshooting Malfunction 1. Switch the appliance off and then on again. 2. If the message appears again, disconnect the appli-
ance from the power supply for at least 30 seconds by pulling out the plug or by switching off the relevant circuit breaker in the fuse box. a If the fault was a one-off, the message disappears. 3. If the message appears again, call the after-sales service. Please specify the exact error message when calling. “Customer Service”, Page 57
The ambient temperature is greater than 30 °C. Ensure that the ambient temperature is below 30
°C.
Insufficient air circulation at the appliance’s installation location. Ventilate the appliance’s installation location. Fluff has accumulated in the drum. Run the Bomull 90°(Cotton 90°) programme
without any laundry or detergent.
The load is too large. The laundry lies in the drum for too long after drying.

1. Remove the laundry from the drum as soon as the
   drying programme has finished. 2. Spread the items of laundry for cooling.
   Unsuitable programme for the type of fabric. Set the suitable programme for the type of fabric. Easy-Care fabrics are dried for too long. The mains plug of the power cord is not plugged in. Connect the appliance to the power supply. The circuit breaker in the fuse box has tripped. Check the circuit breaker in the fuse box. There has been a power cut. Check whether the lighting in your room or other
   appliances are working.
   has not been pressed. Press . Door is not closed. Close the door.

47

enTroubleshooting

Fault

Cause and troubleshooting

The programme does Childproof lock is activated.

not start.

Deactivate childproof lock.

“Deactivating the childproof lock”, Page 34

is activated. Check whether is activated.
“Buttons”, Page 23

Laundry is caught in the door. Remove any trapped laundry.

The pump for the intelligent dosing system is blocked. 1. Switch off the appliance. 2. Clean the pump unit.
“Cleaning the detergent drawer”, Page 39 3. Switch the appliance on. 4. If the display appears again after you clean the
pump unit, call customer service. “Customer Service”, Page 57

Note: You can deactivate and manually dose the intelligent dosing system until the fault is rectified.

The detergent drawer has not been pushed in fully. Push in the detergent drawer until the symbol goes
out.

The door cannot be opened.

The temperature is too high. Wait until the temperature has dropped. Cancel the programme.
“Cancelling the washing programme”, Page 33

Water level is too high. Select a suitable programme for draining.
“Programmes”, Page 26

Power failure. Open the door using the emergency release.
“Emergency release”, Page 56

The water is not drain- Drain pipe or water outlet hose is blocked.

ing.

Clean the drain pipe and the water outlet hose.

Drain pipe or water drain hose is caught or jammed. Ensure that the drain pipe and water drain hose are
not kinked or trapped.

Drain pump is blocked. “Cleaning the drain pump”, Page 40

The water outlet hose is connected too high.

48

Troubleshootingen

Fault

Cause and troubleshooting

The water is not drain- Install the water outlet hose at a maximum height of

ing.

1 metre.

Detergent dosage is too high. Immediate measure: Mix one tablespoon of fabric
softener with 0.5 litres of water and pour the mixture into the compartment for manual dosing (not for outdoor clothing, sportswear or items stuffed with down). If intelligent dosing is activated, reduce the basic dosage Page 35. If you dose manually, reduce the amount of detergent for the next washing cycle with the same load.

Unapproved extension installed on the water drain hose. Remove any unapproved extensions from the water
hose. “Connecting the appliance”, Page 14

The pump cap is not fully screwed in. Ensure that the pump cap is screwed in all the way
into the appliance. The handle on the pump cap must be in a vertical position. “Cleaning the drain pump”, Page 42

Water is not flowing in. Detergent is not being dispensed.

You have not pressed . Press . The filters in the water inflow are blocked. Clean the filters in the water inflow.

The tap is turned off. Turn on the tap.

The water inlet hose is kinked or jammed. Ensure that the water inlet hose is not kinked or
jammed.

The spin cycle runs several times.

The unbalanced load detection system eliminates an imbalance by repeatedly redistributing the laundry. Not a fault ­ no action required.

Note: When loading, where possible, place large and small items of laundry together in the drum. Different sized items of laundry distribute themselves better during the spin cycle.

49

enTroubleshooting

Fault

Cause and troubleshooting

No water is visible in the drum.

Water is below the visible area. Not a fault ­ no action required. Do not add any extra water to the appliance while it
is operating.

Vibrations and movement of the appliance whilst spinning.

Appliance is not correctly aligned. “Aligning the appliance”, Page 16 The appliance feet are not fixed. Secure the appliance feet.
“Aligning the appliance”, Page 16

Transit bolts have not been removed. “Removing the transit bolts”, Page 13.

Drum rotates, water does not flow in.

Load detection is active. Not a fault ­ no action required.

Note: The load detection can take up to two minutes.

Heavy foam build-up

Detergent dosage is too high. Immediate measure: Mix one tablespoon of fabric
softener with 0.5 litres of water and pour the mixture into the compartment for manual dosing (not for outdoor clothing, sportswear or items stuffed with down). If intelligent dosing is activated, reduce the basic dosage Page 35. If you dose manually, reduce the amount of detergent for the next washing cycle with the same load.

i-DOS cannot be ac- Intelligent dosing is not intended for this programme.

tuated.

Not a fault ­ no action required.

“Starting the programme with intelligent dosing

system”, Page 34

Programme progress does not allow intelligent dosing. No remedial action possible.

High spin speed not reached.

A low spin speed is selected. The next time you run a wash cycle, set a higher
spin speed.

is activated. Select the programmes that are suitable for the
type of fabric.

Unbalance load detection system is using a reduced spin speed to eliminate an unbalance. Redistribute the laundry in the drum.

50

Troubleshootingen

Fault High spin speed not reached.

Cause and troubleshooting Note: Where possible, mix large and small items in the drum. Different sized items of laundry distribute themselves better during the spin cycle.

The spin programme does not start.

Start the Centrif.(Spin) programme. Drain pipe or water outlet hose is blocked. Clean the drain pipe and the water outlet hose.

Drain pipe or water drain hose is caught or jammed. Ensure that the drain pipe and water drain hose are
not kinked or trapped.

The unbalanced load detection system has interrupted the spin cycle because the laundry is unevenly distributed. Redistribute the laundry in the drum.

Note: Where possible, mix large and small items in the drum. Different sized items of laundry distribute themselves better during the spin cycle.

Start the Centrif.(Spin) programme.

Water is leaking out at Water inlet hose is not correctly/securely connected. the water inlet hose. 1. Connect the water supply hose correctly.
“Connecting the water inlet hose”, Page 14 2. Tighten the screw connection.

Water is leaking out at The water outlet hose is damaged. the water outlet hose. Replace the damaged water outlet hose.

Water outlet hose is not connected correctly. Connect the water outlet hose correctly.
“Water outlet connection types”, Page 15

Insufficient cleaning.

Basic dosage not adjusted. If intelligent dosing is activated, adjust the basic
dosage Page 35.

Detergent or care products have congealed in dispensers of the intelligent dosing system. 1. Check whether the detergent used is suitable.
“Detergents and care products”, Page 31 2. Drain the dispenser.
“Cleaning the detergent drawer”, Page 39 3. Clean the dispenser. 4. Refill the dispenser.
“Filling the dispensers”, Page 35

Unsuitable detergent added to the dispenser of the intelligent dosing system.

51

enTroubleshooting

Fault Insufficient cleaning. The spin result is not satisfactory. The laundry is too wet/too damp.
Detergent residue on the damp washing.

Cause and troubleshooting 1. Check whether the detergent used is suitable.
“Detergents and care products”, Page 31 2. Drain the dispenser.
“Cleaning the detergent drawer”, Page 39 3. Clean the dispenser. 4. Refill the dispenser.
“Filling the dispensers”, Page 35
A low spin speed is selected. The next time you run a wash cycle, set a higher
spin speed. Start the Centrif.(Spin) programme.
is activated. Select the programmes that are suitable for the
type of fabric.
Drain pipe or water outlet hose is blocked. Clean the drain pipe and the water outlet hose. Drain pipe or water drain hose is caught or jammed. Ensure that the drain pipe and water drain hose are
not kinked or trapped.
The unbalanced load detection system has interrupted the spin cycle because the laundry is unevenly distributed. Redistribute the laundry in the drum. Note: Where possible, mix large and small items in the drum. Different sized items of laundry distribute themselves better during the spin cycle. Start the Centrif.(Spin) programme. Unbalance load detection system is using a reduced spin speed to eliminate an unbalance. Redistribute the laundry in the drum. Note: Where possible, mix large and small items in the drum. Different sized items of laundry distribute themselves better during the spin cycle. Start the Centrif.(Spin) programme. Detergents may contain water-insoluble substances that deposit on the laundry. Start the Sköljning(Rinse) programme. Unsuitable detergent added to the dispenser of the intelligent dosing system.

52

Troubleshootingen

Fault Detergent residue on the damp washing.
Detergent residue on the dry laundry.
Drying programme does not start. The programme duration changes during the wash cycle.

Cause and troubleshooting 1. Check whether the detergent used is suitable.
“Detergents and care products”, Page 31 2. Drain the dispenser.
“Cleaning the detergent drawer”, Page 39 3. Clean the dispenser. 4. Refill the dispenser.
“Filling the dispensers”, Page 35 Basic dosage is not correctly adjusted. If intelligent dosing is activated, reduce the basic
dosage Page 35. Detergents may contain water-insoluble substances that deposit on the laundry. Brush out the laundry after washing and drying. Unsuitable detergent added to the dispenser of the intelligent dosing system. 1. Check whether the detergent used is suitable.
“Detergents and care products”, Page 31 2. Drain the dispenser.
“Cleaning the detergent drawer”, Page 39 3. Clean the dispenser. 4. Refill the dispenser.
“Filling the dispensers”, Page 35 Basic dosage is not correctly adjusted. If intelligent dosing is activated, reduce the basic
dosage Page 35. Door is not closed. Close the door. No drying programme is selected. Select a suitable drying programme.
“Programmes”, Page 26 The programme operation is optimised electronically. This may change the programme duration. Not a fault ­ no action required. The unbalanced load detection system eliminates an imbalance by repeatedly redistributing the laundry. Not a fault ­ no action required. Note: When loading, where possible, place large and small items of laundry together in the drum. Different sized items of laundry distribute themselves better during the spin cycle.

53

enTroubleshooting

Fault The programme duration changes during the wash cycle. Drum jerks after the programme starts. Fluff on the laundry.
The laundry is too damp.

Cause and troubleshooting Foam detection system switches on a rinse cycle if foam build-up is too high. Not a fault ­ no action required. This is caused by an internal motor test. Not a fault ­ no action required. Fluff has accumulated in the drum. Run the Bomull 90°(Cotton 90°) programme
without any laundry or detergent.
Unsuitable programme for the type of fabric. There has been a power cut. Check whether the lighting in your room or other
appliances are working.
The load is too large. After the end of the programme, warm laundry feels damper than it actually is. 1. Remove the laundry from the drum as soon as the
drying programme has finished. 2. Spread the items of laundry for cooling.
Drying target not adjusted. Load too small. Water tap is closed during the drying phase. Make sure that the water tap also remains open
during the drying phase.
The ambient temperature is greater than 30 °C. Ensure that the ambient temperature is below 30
°C.
Insufficient air circulation at the appliance’s installation location. Ventilate the appliance’s installation location. The water pressure is low. No remedial action possible. Laundry is not spun sufficiently. Always select the highest possible spin speed for
the washing programme in question.
Thick and multi-layered fabrics require a longer drying time. Set a timed programme for the subsequent drying.
“Programmes”, Page 26

54

Troubleshootingen

Fault

Cause and troubleshooting

Loud noises during the spin cycle.

Appliance is not correctly aligned. “Aligning the appliance”, Page 16

The appliance feet are not fixed. Secure the appliance feet.
“Aligning the appliance”, Page 16

Transit bolts have not been removed. “Removing the transit bolts”, Page 13.

Banging noises, rattling in the drain pump.

Foreign bodies have got into the drain pump. “Cleaning the drain pump”, Page 40

Slurping, rhythmical suction noise.

The drain pump is active, the detergent solution is pumped out. Not a fault ­ normal operating noise.

Fan noise during the Process fan is active.

washing phase.

Not a fault ­ normal operating noise.

Longer, whirring noise Intelligent dosing system dispenses detergent or care

before the start of the products.

wash cycle or fabric softening.

Not a fault ­ normal operating noise.

Brief whirring noise Intelligent dosing system carries out a function test.

after switching on the appliance.

Not a fault ­ normal operating noise.

Spin noise during the Thermal spinning is active. drying phase.

Rushing, hissing noise.

Water is flushed under pressure into the detergent drawer. Not a fault ­ normal operating noise.

Water inlet noise during the drying phase.

Drying phase requires water. 1. Not a fault. 2. Make sure that the water tap also remains open
during the drying phase.

Odours have formed in the appliance.

Humidity and detergent residue may promote the formation of bacteria. “Cleaning the drum”, Page 38 If you are not using the appliance, leave the door
and detergent drawer open so that residual water can evaporate.

55

enTransportation, storage and disposal
19.1Emergency release
Releasing the door Requirement: The drain pump is empty. Page 40 1. ATTENTION! Escaping water may
cause material damage. Do not open the door if you can
see water through the glass. Pull the emergency release downwards with a tool and release.

20.2Inserting the transit bolts
Secure the appliance before transportation using transit bolts in order to prevent transport damage. 1. Use a screwdriver to remove the 4
cover caps.

a The door lock is released. 2. Insert the maintenance flap and
lock it into place. 3. Close the maintenance flap.
20Transportation, stor- Transportation,storageanddisposal age and disposal

Transportation, storage and disposal

20.1Removing the appliance
1. Turn off the tap. 2. Empty the water inlet hose. 3. Switch off the appliance.
“Switching off the appliance”, Page 33 4. Unplug the appliance’s mains plug. 5. Drain the water. “Cleaning the drain pump”, Page 40 6. Detach the hoses. 7. Empty the dispensers. 56

Keep the cover caps. 2. Insert the 4 transit bolts.
“Removing the transit bolts”, Page 13
20.3Using the appliance again
For further information, see “Installation and connection”, Page 12 and “Starting an empty washing cycle”, Page 19.

20.4Disposing of old appliance
Valuable raw materials can be reused by recycling.
WARNING Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. Do not install the appliance behind
a door as this may obstruct the appliance door or prevent it from opening. With redundant appliances, unplug the power cord. Then cut through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close. 1. Unplug the appliance from the mains. 2. Cut through the power cord. 3. Dispose of the appliance in an environmentally friendly manner. Information about current disposal methods are available from your specialist dealer or local authority.
This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

Customer Service

21Customer Service CustomerService
Function-relevant CustomerService genuine spare parts according to the corresponding Ecodesign Order can be obtained from Customer Service for a period of at least 10 years from the date on which your appliance was placed on the market within the European Economic Area. Note: Under the terms of the manufacturer’s warranty the use of Customer Service is free of charge. Detailed information on the warranty period and terms of warranty in your country is available from our aftersales service, your retailer or on our website. If you contact Customer Service, you will require the product number (ENr.) and the production number (FD) of your appliance. The contact details for Customer Service can be found in the enclosed Customer Service directory or on our website.
21.1Product number (E-Nr.) and production number (FD)
You can find the product number (ENr.) and the production number (FD) on the appliance’s rating plate. Depending on the model, the rating plate is located: ¡ On the inside of the door. ¡ On the inside of the maintenance
flap. ¡ On the rear of the appliance. Make a note of your appliance’s details and the Customer Service telephone number to find them again quickly.

57

enConsumption values

22Consumption values Consumptionvalues

The Consumptionvalues following information is provided in accordance with the EU Ecodesign Regulation. The values specified for programmes other than Eco 40-60 are only given as a guide and were determined in accordance with the applicable standards EN60456 and EN62512. The automatic dosing function has been deactivated for this purpose. Note on the comparison test: Deactivate the automatic dosing function unless this function is the object of the test.

Programme Load (kg)

Eco 40-602 Eco 40-602 Eco 40-602 Eco 40-60 +
+ 2 Eco 40-60 +
+ 2 Bomull(Cotton) 20 °C Bomull(Cotton) 40 °C Bomull(Cotton) 60 °C Bomull(Cotton) 40 °C +

10.5 5.3 2.5 6.0
3.0
10.0
10.0
10.0
10.0

Programm e duration (hr:min )1 3:59 2:59 2:25 8:40

Energy consumption (kWh/ cycle)1 1.110 0.440 0.200 3.820

Water consumption (l/ cycle)1
78.0 52.0 37.0 100.0

Max- Spin imum speed temper- (rpm)1 ature (°C) 5 mins1

41

1400

28

1400

22

1400

23

–

Residual moisture (%)1
53.00 53.00 53.00 -0.1

5:00 1.920 55.0 21

–

-0.1

4:05 0.550 90.0 25

1400 50.00

4:05 1.300 90.0 40

1400 50.00

4:05 2.200 90.0 60

1400 50.00

4:25 1.500 105.0 40

1400 50.00

Syntet(Easy 4.0 Care) 40 °C

2:35 0.900 68.0 43

1400 30.00

Mix 40 °C

4.0

1:10 0.750 50.0 41

1400 45.00

1 Due to the influence of water pressure, hardness and inlet temperature, ambient temperature, type, amount and soiling of laundry, detergent used, fluctuations in the power supply and the selected additional functions, the actual values may deviate from the stated values.
2 Test programme in accordance with the EU Ecodesign Directive and the EU Energy Labelling Regulation with cold water (15 °C).

58

Technical dataen

Programme

Load (kg)

Programm e duration (hr:min )1

Energy consumption (kWh/ cycle)1

Water consumption (l/ cycle)1

Max- Spin imum speed temper- (rpm)1 ature (°C) 5 mins1

Residual moisture (%)1

Ylle/

2.0

Handtvätt

(Wool/Hand-

wash) 30 °C

0:41 0.180 45.0 22

800

30.00

1 Due to the influence of water pressure, hardness and inlet temperature, ambient temperature, type, amount and soiling of laundry, detergent used, fluctuations in the power supply and the selected additional functions, the actual values may deviate from the stated values.
2 Test programme in accordance with the EU Ecodesign Directive and the EU Energy Labelling Regulation with cold water (15 °C).

23 Technical data Technicaldata

Technical data
Appliance height Appliance width Appliance depth Appliance depth with door closed Appliance depth with door open Weight Maximum load Mains voltage
Minimum installation protection Nominal power Power consumption

84.8 cm 59.8 cm 59.0 cm 63.5 cm
107.2 cm
79.4 kg 10.5 kg 220-240 V, 50 Hz 10 A
1900-2300 W ¡ Off mode:
0.50 W ¡ Left-on mode:
0.50 W

Water pressure

¡ Minimum: 100 kPa (1 bar)
¡ Maximum: 1000 kPa (10 bar)

Length of the wa- 150 cm ter inlet hose

Length of the wa- 150 cm ter outlet hose

Length of the power cord

210 cm

This product contains light sources from energy efficiency class F. These light sources are available as a spare part and must only be replaced by trained specialist staff. You can find more information about your model online at https:// eprel.ec.europa.eu/1. This web address is linked to the official EU EPREL product database. Please then follow the instructions on searching for the model. The model identifier is made up of the characters before the slash in the product

1 Only applies to countries in the European Economic Area 59

enTechnical data number (E-Nr.) on the rating plate. Alternatively, you can also find the model identifier in the first line of the EU energy label.
60

Thank you for buying a Bosch Home Appliance!
Register your new device on MyBosch now and profit directly from:
· Expert tips & tricks for your appliance · Warranty extension options · Discounts for accessories & spare-parts · Digital manual and all appliance data at hand · Easy access to Bosch Home Appliances Service
Free and easy registration ­ also on mobile phones: www.bosch-home.com/welcome

Looking for help? You’ll find it here.

Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.

BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY www.bosch- home.com
A Bosch Company
9001846757
9001846757 (030725) en

Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom

References

• Home Appliances Global Website | Bosch
• Home Appliances Global Website | Bosch
• Bosch Service | Service worldwide
• Welcome to MyBosch

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>