Altronix DCL2 DIN Rail Mounting Clip Installation Guide
- June 2, 2024
- Altronix
Table of Contents
Altronix DCL2 DIN Rail Mounting Clip
Overview
The Altronix DCL2 DIN Rail Mounting Clip allows for easy installation of Altronix adapters with screw mounting holes such as: Altronix VR series, eBridge, NetWay, and Pace adapters onto a standard DIN rail (Altronix models D10, D12, D19, or D24).
Installation Instructions
- Secure Altronix adapter to the DCL2 using included mounting screw. (Refer to Fig. 1).
- Snap DCL2 on to the DIN rail by utilizing the grooves of the clip.
Fig. 2
Description: A side view diagram of the DCL2 DIN Rail Mounting Clip with detailed measurements in inches. Measurements include:
- Width of the top flange: 2.787″
- Height of the raised section: 0.340″
- Height of the main body: 0.583″
- Depth of the side clip: 0.748″
- Thickness of the base: 0.075″
- Width of the mounting slot: 0.155″
- Width of the bottom flange: 0.062″
- Diameter of the hole through the clip: 0.100″
Specifications
| Feature | Specification |
|---|---|
| Product Code | DCL2 |
| Revision | 09/30/22 |
Altronix is not responsible for any typographical errors.
Contact Information
140 58th Street, Brooklyn, New York 11220 USA
- Phone: 718-567-8181
- Fax: 718-567-9056
- Website: www.altronix.com
- Email: info@altronix.com
FAQ
- What models of Altronix adapters can the DCL2 mounting clip support?
- The DCL2 mounting clip supports Altronix VR series, eBridge, NetWay, and Pace adapters, specifically models D10, D12, D19, or D24.
- How is the Altronix adapter secured to the DCL2?
- The adapter is secured to the DCL2 using the included mounting screw.
- How do you attach the DCL2 to the DIN rail?
- The DCL2 clips onto the DIN rail by utilizing the grooves of the clip.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>