Xiqi 2BDGD-LX-D3 Mini Printer User Manual
- June 2, 2024
- Xiqi
Table of Contents
Xiqi 2BDGD-LX-D3 Mini Printer
Thank you for choosing our printer!
For a better user experience, we strongly recommend that you read our user
manual before using the product!
Product Appearance
Indicator Light Description
- If you turn on the printer without a Bluetooth connection, the button light will constantly change from dark to bright.
- If you turn on the printer normally, the light button will steady on green.
- If the printer is lacking of paper, the green light will flash.
- If the printer head is overheating, the light button will turn red, please wait 5 minutes before the next printing.
- If the battery is too low, the red light will flash, please charge the printer in time.
Usage Guidelines
Download the “Funny Print” APP
Method 1
Open “APP Store”, search “Funny Print” APP and download it.
Method 2
Open the “Google Play ” directly search “Funny Print” APP and download it.
Method 3
The “Funny Print” APP QR code will be printed automatically when you double-
click the button after turning on the printer, you also can download it by
scanning the QR code on the paper.
Usage Steps
Tips
Please fully charge the printer for the first time, then unplug the charger
before use!
- Please press the button and hold on for 3 seconds to turn on the printer!
- Open the “Funny Print” APP and Log in
- Please turn on the Bluetooth of your phone
- Open the “Funny Print” APP and Click the “+ Add device” in the upper left corner to look for the printer device and connect it.
- After a successful connection, you can start using this printer
How to Replace The Printing Paper
-
Open the cover of the print pod, remove the old printer paper Confirming the direction of paper roll placement
(NOTE: The paper should be exposed to the bin 2cm long so that the machine can automatically absorb paper when closing the bin box) -
Put the printer cover on then the machine can be used normally.
Warning
- Input Parameter: 5V 1A, Fast charger is strictly prohibited.
- Prohibited from disassembling, assembling, compressing, or throwing into fire.
- If the battery is severely inflation, do not continue to use it.
- Do not place the product in a high-temperature environment.
- It is strictly prohibited to use it if the printer is immersed in water
- Replacing batteries with the wrong type poses a risk of explosion, be sure to dispose of used batteries according to the instructions.
Precaution
- Unplug the charging cable promptly after charging is completed.
- Improper charging may cause damage to the print head.
- Do not touch the print head to avoid burns due to overheating.
- Insert or remove the charging cable gently to prevent damage to the port due to excessive force.
- Continuous printing may cause the print head to overheat and stop working. This is not a machine malfunction, and the printer can be used again after the print head cools down.
- To avoid danger, do not use or charge in high-temperature, high-humidity, excessive smoke and dust environments, such as in the bathroom, sauna room, near open flames, etc.
Question & Answer
Scan the OR code to download the “Funny Print” APP
How to deal with Bluetooth connection failure?
- To re-enable Bluetooth on your phone
- To restart your mini printer
- To reinstall the app and agree to all permission prompts
- Try using another phone.
- The machine cannot be connected to two phones at the same time, so do not be connected to other phones.
- If the app cannot connect to the machine, you can double-click the power button to print a test page, which has a QR code. Scan the QR code, follow the prompts to redownload the app, and reconnect it again.
If you still have any questions, please feel free to contact us, we will reply to you promptly within 24 hours!
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used by the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user
is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
RF warning for Portable device
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>