movinglife ATTO SPORT Oxygen Bottle Holder and Case Fresh Air User Guide
- June 2, 2024
- movinglife
Table of Contents
movinglife ATTO SPORT Oxygen Bottle Holder and Case Fresh Air
Product Specifications
- Product Name: Oxygen Bottle Holder & Case
- Compatibility: Designed to work with ATTO / ATTO SPORT mobility scooters
- Material: Durable and lightweight materials
- Color: Black
- Function: Securely holds oxygen bottle for easy access during mobility scooter use
Product Usage Instructions
Installation Steps
- Unscrew the plastic knobs attached to the back seat.
- Insert the loop of the oxygen bottle holder rear section under the lift handle, and screw back the knobs.
- Pass the straps through the gap at the back of the chair and then through the straps on the oxygen bottle holder.
- Connect the straps together by threading a strap through the loop.
- Tighten the rear buckle to secure the bottle holder.
- Insert the oxygen bottle into the bottom of the bottle holder.
- Fasten the strap to the top of the container.
- The product is now ready to use.
Frequently Asked Questions (FAQ)
-
Q: Can I use this oxygen bottle holder with other mobility scooters?
A: The Oxygen Bottle Holder & Case is specifically designed to work with ATTO / ATTO SPORT mobility scooters and may not be compatible with other models. -
Q: How do I clean the oxygen bottle holder?
A: You can wipe the holder with a damp cloth using mild soap if needed. Avoid using harsh chemicals or abrasive materials to prevent damage. -
Q: Can I adjust the straps for different-sized oxygen bottles?
A: The straps on the bottle holder are adjustable to accommodate various sizes of oxygen bottles for a secure fit.
OXYGEN BOTTLE
HOLDER & CASE
FRESH AIR, EVERYWHERE
SEATING & SUPPORT
STORAGE
TECHNICAL
ATTO Accessories are
created specifically to enhance, support and work with the ATTO mobility
scootesr in all user modes; while driving, while wheeling along as trolley and
when folded for storage or transportation.
SCAN TO LEARN HOW TO COMBINE OUR ACCESSORIES
How to Use
OXYGEN BOTTLE HOLDER & CASE
- Unscrew the plastic knobs attached to the back seat. Insert the loop of the oxygen bottle holder rear section under the lift handle, and screw back the knobs
- Pass the straps through the gap at the back of the chair and then through the straps on the oxygen bottle holder
- Connect the straps together by threading a strap through the loop
- Tighten the rear buckle to secure the bottle holder
- Insert the oxygen bottle into the bottom of the bottle holder
- Fasten the strap to the top of the container
- The product is ready to use.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>