ALECOIL HHA100 Hot Water Hanging Unit Heater User Manual
- June 2, 2024
- ALECOIL
Table of Contents
ALECOIL HHA100 Hot Water Hanging Unit Heater
Product Information
Specifications:
- Model: HHA50, HHA100
- Capacity: 50,000 BTU (HHA50), 100,000 BTU (HHA100)
- Noise Level: 53 dBA (HHA50), 65 dBA (HHA100)
- Power Cord Length: 10 ft
- Port Size: 1 inch ID
- Heater Coil: Included
- Blower: Included
- Power: Voltage varies
- Airflow: Varies
- Coil Size: Varies
- Operating Temperature: Varies
- Design Pressure: Varies
- Test Pressure: Varies
Product Usage Instructions
Safety Considerations:
To ensure safe operation, please follow these guidelines:
- Observe all safety warnings and precautions.
- Maintain proper installation according to the manual.
- Regularly clean the filter to prevent damage.
Installation:
- Take out the mounting brackets, screws, and tapping screws from the package.
- Attach the mounting brackets to the unit with screws.
- Mount the unit to the ceiling or joists using tapping screws.
- Connect the unit’s inlet/outlet ports to your water pipes using appropriate adapters or connectors.
Filter Cleaning:
- Pull on the handle to remove the filter.
- Clean the filter and let it dry completely.
- Fit the filter back in place after ensuring it is dry.
FAQ (Frequently Asked Questions):
-
Q: How often should I clean the filter?
A: It is recommended to clean the filter regularly, at least once a month, to ensure proper functioning of the unit. -
Q: Can this unit be used in a greenhouse?
A: Yes, this unit is ideal for use in greenhouses among other spaces like living rooms, bedrooms, garages, etc.
Website: www.alecoil.com
Email: support@alecoil.com
800-958-1809
(8:00 am to 7:00 pm PST), Monday to Friday
Safety Considerations
To reduce the risk of fire, electric shock or personal injury, please observe the following.
WARNING
- Installation or repair of this equipment must be performed by a qualified service agency.
- Always disconnect the power supply before making wiring connections to prevent electrical shock and equipment damage.
- Any original factory wiring that requires replacement must be replaced with wiring material having a temperature rating of at least 221°F.
- When installing, the clearance for the back of the heater should be at least 6 inches from the wall.
- Do not start the unit without the filter installed to prevent debris from being drawn in and damaging the heater.
- Be sure no obstructions block air intake or air discharge of the heater.
General Information
Installation and service instructions in this manual apply to the ALECOIL hot
water hanging unit heaters which should be installed using proper applications
for their most effective function as a hanging unit heater. ALECOIL hot water
hanging unit heaters use the energy from a building’s hot water source to offer
efficient, whisper quiet operation, and come with a temperature control switch,
sensing the temperature of the water inlet to control the fan start/off,
reducing frequency of manual operations to save you time. The fan will
automatically start when the temperature of the water inlet side reaches the
preset value. The fan will automatically switch off when the temperature of the
water inlet side falls below the preset value. Once you have completed the
installation of your unit heater, preset your target temperature, open your
hot water valve, and ALECOIL heater will do the rest.
Ideal for use in living rooms, bedrooms, garages, warehouses and greenhouses.
Standard Features
Installation
Step 1: Take out the mounting brackets(Fig.1), screws(Fig.2) and tapping screws(Fig.3) from the package.
Step 2: Attach the mounting brackets to unit with screws. (Fig.4)
Step 3: Mount the unit to the ceiling or joists with tapping screws.
(Fig.5)
Step 4: Depending on your water pipes, choosing soldered or sweat adapters or push to fit connector to connect the unit inlet/outlet ports to your pipes.(Fig.6)
Filter Cleaning
ALECOIL hot water unit heater comes with a filter to prevent debris from being drawn in and causing damage to the interior of the unit. This filter can be washed and reused. Please clean the filter regularly to keep the unit functioning properly.
WARNING
- Do not remove the filter while the heater is operating.
- Do not start the machine without the filter properly in place prevent to prevent debris from being drawn in and damaging the heater.
- If the unit has not been used for a long time, clean the filter before turning it back on.
Step 1: Pull on the handle to remove the filter. (Fig.7)
Step 2: Clean the filter and let it completely dry.
Step 3: Push the top of the filter inward to fit it back in place after
ensuring it is completely dry. (Fig.8)
Dimensions
Model | A | B | C | D | E | F | G | H | Port |
---|---|---|---|---|---|---|---|---|---|
HHA50 | 16 (407) | 12.1 (307) | 10.5 (267) | 18.6 (471) | 17.4 (442) | 7.9 (200) | |||
12.9 (328) | 7.71 (196) | 1 (25.4) | |||||||
HHA100 | 20.1 (509) | 16.1 (409) | 13.5 (344) | 22.6 (573) | 21.4 (544) | 10.9 | |||
(277) | 16.9 (429) | 11.5 (292) | 1 (25.4) |
Circuit Diagram
Specifications
Component | Description | Model |
---|---|---|
HHA50 | HHA100 | |
**** Heater | Capacity | 50,000 BTU |
Noise | 53 dBA | 65 dBA |
Power Cord | 10 ft | 10 ft |
**** Coil | Port | 1″ ID |
Coil Size | 12″x12″ | 16″x16″ |
OP. Temp. | 32℉ – 350℉ | 32℉ – 350℉ |
Design Pressure | 175 psi | 175 psi |
Test Pressure | 263 psi | 263 psi |
**** Blower | Power | 60W |
Voltage | 120V | 120V |
Airflow | 500 CFM | 1500 CFM |
Warranty
ALECOIL ensures the product components will be free of material defects in the
workmanship of its materials for 3 years following the date of initial
purchase of this product by a customer. This warranty is limited to the repair
or replacement of defective equipment. If it is necessary to return a unit for
service, the customer is solely responsible for proper packaging and
transportation costs. Customers must initiate the warranty process by
contacting ALECOIL. Do not send any component or product back to ALECOIL
without a return material authorization. This limited warranty does not apply
to any part or component that is damaged in transit, been subject to misuse,
corrosion, chemicals, acts of God, has not been installed, operated, or
serviced according to the seller’s instructions, has been operated beyond the
factory rated capacity, or has been altered in any way. Routine maintenance is
not covered by this warranty. This limited warranty is void if defect(s)
result from failure to have this unit installed by a qualified heating and air
conditioning contractor. ALECOIL shall not be responsible for loss of function
of any product, loss of time, inconvenience, or damage to other equipment, or
any other indirect or consequential damage any to property whether as
a result of a breach of warranty, neglect, or otherwise.
Website: www.alecoil.com/warranty
Email: support@alecoil.com
800-958-1809
(8:00 am to 7:00 pm PST), Monday to Friday
WARRANTY QR CODE
Website:www.alecoil.com
Email:support@alecoil.com
800-958-1809
(8:00 am to 7:00 pm PST), Monday to Friday
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>