Wking X10 Wireless Speaker User Manual

**Wking X10 Wireless Speaker User Manual

**

Thank you for purchasing the W-KING X10 Wireless Speaker. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and order number.
Amazon E-mail: [email protected]

Package Contents

X10 Wireless Speaker
USB A to USB C Charging Cable
3.5mm Audio Cable
User Manual

Product Diagram

Specifications

V1.2;AVCIP V1.2
Power Input| DC 5V
Frequency Range| £50Hz-20KHz
Signal-to-Noise Ratio| ..?80cIB
Charging Time| 8.5-9 hours
Operating Range| Up to 10m / 33ft
Battery Type| Li-ion 7.2V 7800mAh
Operating Temperature| 0°C – 45°C / 32°F – 113°F
Dimensions| 324 x 148 x 146mm / 12.75″ x 5.83″ x 5.75″
Net Weight| 3000g / 105.8oz
Waterproof| IPX6
True Wireless Stereo| Support
Phone/Tablet Charging| Support
TF Card Play| Support
|

Charging

Fully charge this speaker before first use. Used our provided USB Type-C charging cable fo charge your speaker. When there are 3 solid white lights, your speaker i fully charged and ready for use. Charging takes around 8.5-9 hours.

Note
USB Power adapter is NOT INCLUDED.
Power On / Off

Power On/Off
Long press the ON/OFF button for 2-3 seconds to power on or off (LED indicator flashes blue or off)
Pairing

1. When you turn on the speaker, the speaker will automatically enter pairing mode and the LED indicator will start to flash blue rapidly
2. Active the pairing function on your phone or other compatible device and select “W-KING X10” 3. If a code or pin is required for pairing, please enter “0000”
3. When successfully paired, the LED indicator will stay blue

Notes

• To reset the speaker (to clear the pairing list or any program errors). use a straightened paper clip or a toothpick to carefully short-press the reset hole
• The speaker will automatically shut down after 10 minutes in pairing mode if no devices are paired If your paired device is switched off or manually disconnected, the speaker will enter pairing mode and automatically shut down after 10 minutes
• If the speaker or connected device exceeds the operating range, the speaker will disconnect. The connection to the last successfully connected device will be re-established once you re-enter wireless range within 10 minutes. To connect to other devices, please repeat the previous “Pairing” steps

Playing Audio via Audio Input Connection

1. Connect the X10 to your PC, laptop, or other device with audio output port using the included 3.5mm audio cable
2. Long press the on/off button for 2-3 seconds to turn on, and the LED indicator will light up solid green

TF Card Function

1. Insert a TF card into the TF card slot on X10
2. Green LED confirms that the speaker has enter TF card mode

Notes

• The speaker wil disconnect from your phone or other paired device when an audio cable is plugged into the audio input jock
• When playing audio using the audio input jack, press the volume + / – to adjust the volume and short-press play/pause fo pause or resume. Next / previous frack conirol on the speaker s disabled in audio input mode
• For some computers, you may need fo access the audio control panel fo manually set the speaker as the default audio device

Charging Phone / Tablet

1. Connect your phone / tablet to the type-c port of the X10 speaker
2.  Turn on fhe speaker, your device will be charged automatically
3. Tum off the speaker fo discharge your device

Adjust Sound Effect
Short press the Equalizer button ” T | 1″ to switch between indoor or outdoor mode
True Wireless Stereo Pairing

True Wireless Stereo Pairing

1. Turn on both of your X10 speaker simultaneously, you will see blue LED indicator flashes rapidly on fhe two devices

2. Select one speaker as the leading speaker, double press the ON / OFF button fo start pairing,

3. After successfully paired, the blue LED indicator of the leading  speaker floshes slowly and the secondary speaker LED keeps bright blue

4. Tum on your phone’s Bluetooth, search “W-KING X10” and connect.
   The blue LED indicator of the leading speaker keeps bright. The two speakers will play music simultaneously when complete pairing

5. To disconnect True Wireless Stereo pairing, press the volume button “+” and *-” at the same fime. you wil see blue LED fiashes rapidly on the secondary speaker, that means True Wireless Stereo unpaired successfully

We have two version X10 speakers. “W-KING X10-1” and “W-KING X10” are the different version speaker.The W-KING X10 is an upgraded version of the W-KING X10-1.They could not be paired in True Wireless Stereo mode.True Wireless Stereo function only works under the same Bluetooth name.

Controls & LED Indicators

Functions

| Instructions
---|---
Adjust Volume|

Short press volume button + / –

Pause / Resume

| Short press play/pause button
Next / Previous track|

Long press + / – to Next / Previous track

Cancel pairing

| When connected, press volume button + and – at the same time
Answer / End a call|

Short press the play/pause button once

Reject an incoming call

|

Long press the play/pause button for 2 seconds

Blue Flashing Rapidly

|

Pairing mode / Disconnected

Solid Blue

|

Connected / Outdoor mode

Solid Green

|

Audio input mode

White Lights Flashing

|

Charging

White Lights On (after charging)|

Fully charged

Product Care & Use

• Keep away from liquids, extreme heat, and strong magnetic fields + Do not use this speaker at high volume for extended periods, as this may cause permanent hearing damage or loss

Warranty & Customer Support

For questions, support, or warranty claims, contact us at Amazon E-mail: [email protected] Please contact us with your region, order number and product model.
*** Please note, W-KING can only provide after sales service for products purchased directly from our official online store. If you have purchased from a different seller, please contact them directly for service or warranty issues.
Notice for US**
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.  This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation

FCC Rules This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help

Caution
Changes or modifications made to this device not expressly approved by W-KING may void the FCC authorization to operate this equipment.

W-KING® is a registered trademark in the U.S. and European Union. All rights reserved.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>