ASMAX Z1 Bluetooth Communication System User Guide
- May 15, 2024
- ASMAX
Table of Contents
Z1 mode
ASMAX English
Quick Start Guide
PMN: Bluetooth
Communication System
Buttons
GETTING STARTED
-
Installation Device
-
Download ASMAX APP from
Official website、App store 、Google Play Store
https://www.asmax.net/download -
Power on/off
Hold Intercom Button and Function Button to ON/OFF -
Phone Pairing Hold Function Button to Red and Blue LED Flash alternate. Select ASMAX Z1 in the list of Bluetooth devices detected.
-
Music Controls Press Function Button to On/Off Hold Volume + for Previous Song Hold Volume – for Next Song
-
Mobile Phone
(1)Answer a Call (2)End a Call Press Intercom Button
(3)Reject a Call Hold Intercom Button
(4)Open/ Close Automatically answer Hold Volume + and Volume – to open automatically answer
(5)Phone call
Say “Hi Max, call XX” Or Operation on the phone.
More detail information about phone call integration function please check Basic Function Overview on PHONE CALL part. -
Group Mode Hold Intercom Button to ENTRY/EXIT Group Mode, then Press Intercom Button confirm to join in group.
-
Freedom Mode Press Intercom Button to ENTRY/EXIT freedom mode
-
Bridge Mode
(ASMAX connect with other brand)
Hold Function Button , then,Press twice Intercom Button ENTRY to bridge mode. After successful, Press twice Function to start to intercom. Press twice Function Button to Exit -
Bridge Intercom Mode
Firstly, Bridge Pairing with Non ASMAX device (do not start intercom). Then, Z1 Connect with others as a group, Z1 Press twice Function button to start intercom.
Z1 Press twice Function Button to shut down NON ASMAX device. -
Switch between different Mode Press Intercom Button to switch between the Freedom Mode, Group Mode(used to joined to group) and Standby states
-
Knocking Function Press twice Function Button to unlock “Knocking Function”, then, knock two or three times to start to join in a group.
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information:
This device meets the government’s requirements for exposure to radio waves.
The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety margin designed
to assure the safety of all persons regardless of age or health. FCC RF
Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg
averaged over one gram of tissue. Device types: Bluetooth Communication System
(FCC ID: 2BEH5-Z1) has also been tested against this SAR limit. This device
was tested for typical body-worn operations with the back of the device kept
0mm from the body. To maintain compliance with FCC RF exposure
requirements, use accessories that maintain a 0mm separation distance between
the user’s body and the back of the Bluetooth Communication System. The use of
belt clips, holsters and similar accessories should not contain metallic
components in its assembly. The use of accessories that do not satisfy these
requirements may not comply with FCC RF exposure requirements, and should be
avoided.
ISED Statement
This device complies with Industry Canada license exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not
cause interference, and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
The digital apparatus complies with Canadian CANICES – 3 (B)/NMB – 3(B).
This device meets the exemption from the routine evaluation limits in section
2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain
Canadian information on RF exposure and compliance.
This equipment complies with Canada radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance Ocm
between the radiator & your body.
Specific Absorption Rate (SAR) information:
This device meets the government’s requirements for exposure to radio waves.
The guidelines are based on standards that were developed by independent
scientific Organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety margin designed
to assure the safety of all persons regardiess of age or health. SED RF
Exposure Information and Statementthe SAR limit of Canada(|SED) is 1.6 W/kg
averaged over one gram of tissue. Devicetypes: Device
has also been tested against this SAR limit. This device was tested for
typical body-worn operations with the back of the phone kept Omm from the
body. To maintain compliance with ISED RF exposure requirements,
useaccessories that maintain an Omm separation distance between the user’s
body andthe back of the Bluetooth Communication System. The use of bet clips,
holsters and similar accessories shouldnot contain metallic components in its
assembly. The use of accessories that do notsatisf these requirements may not
comply with ISED RF exposure requirements, andshould be avoided.
Global Intelligent Communication
Equipment Brand
For Outdoor Sports
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>