Lucci decor 260918 Marx Table Lamp Instruction Manual

: June 4, 2024
: Lucci decor

Table of Contents

Lucci decor 260918 Marx Table Lamp
Warranty
Installation Requirements
Installation Directions
Safety Tips
Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Lucci decor 260918 Marx Table Lamp

Lucci-decor-260918-Marx-Table-Lamp-product

Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all instructions carefully before assembly, installation and use of this product. Please keep the instructions for future reference.

Warranty

This luminaire is covered by a 12-month warranty from the date of purchase. Please retain the proof of purchase.
Warranty will be void if there is any damage due to improper usage or modification to the luminaire.
Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void the warranty.

Installation Requirements

Select a suitable location for this luminaire:
- Ensure it is on a flat and stable surface.
- This product is suitable for indoor use only.
- Do not place flammable material near or over the luminaire.
- Ensure the luminaire is not installed in direct line of an air vent/system.
- If the luminaire is placed in an area prone to moisture, ensure that the area is well ventilated, and an appropriately rated exhaust fan is used if required. Damage or corrosion caused by moisture is not a product fault, and as such is not covered under warranty.
Do not exceed the maximum wattage rating.
Take care not to pull any electrical wires during unpacking as this may damage the connection.
Lay out all the components on a smooth surface and make sure no components are missing before assembling.
If parts are missing, return the complete product to the place of purchase for inspection or replacement.
Check whether the luminaire has been damaged during transport. Do not operate/install any product which appears damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
Do not plug into the mains power socket-outlet before or during assembly. Only do so after the portable lamp is
fully assembled with the globe installed and is ready to use for the first time.

Installation Directions

Remove all packaging material from the product.
Remove the lamp shade (C) from the lamp holder (A).
Install a globe (B – not included) onto the lamp holder.
NOTE: Do not exceed the maximum rated wattage 5W. Only LED globes are allowed.
Install the lamp shade (C) back onto the lamp holder.
NOTE: Install the glass lamp shade with care. Do not over tighten the lamp shade which may cause the glass to break.
Select a suitable location for the luminaire. See the installation requirements above.
Adjust the lamp head to your desired angle.
NOTE : DO NOT adjust the lamp head over 90° vertically & 350° horizontally as this may damage the internal wires.
Insert the plug into the mains power socket outlet and ensure it is fully plugged in.
Turn the power on at the mains power socket outlet.
Use the rocker switch on the lamp base to turn the lamp On/Off.
NOTE : The rocker switch will only turn off the power of the luminaire. Wireless charger & USB charger can still be used when the switch is off.

Wireless Charging:
Place your device on the wireless charging area. Make sure the device is over the circle symbol. Charging will activate automatically. Check the status of your device to ensure charging is activated.
NOTE : The wireless charger is rated 5V DC, 1A. And it is only compatible with Qi-compatible devices. Only charge your compatible devices. If unsure, check the user manual of your device.
NOTE : Slightly adjust the position of your device if charging is not activated.

USB Charging:
Charge your device via the USB outputs on the base of the luminaire. The rated output of the USB output is 5V DC, Max.2.1A. Refer to the instruction manual of your device for the required charge ratings.
NOTE : When the wireless charger and USB charger are used simultaneously, in some circumstances, the two devices might be drawing current over the rated Max.2.1A. As a result, the power of the wireless charger will be cut off and self-protected. This is not a product fault and will be recovered once the current reduces. Lucci-decor-260918-Marx-Table-Lamp-
fig-1

NOTE: DO NOT adjust lamp head over 90° vertically & 350° horizontally as this may damage the internal wires.

Safety Tips

Always ensure the power is OFF and the luminaire has cooled down before performing any maintenance, cleaning, changing the globe or making any adjustment to the luminaire.
The external flexible cable or cord of this luminaire cannot be replaced; if the cable or cord is damaged, the luminaire shall be destroyed.
To avoid injury or damage to the luminaire, ensure that power leads and screws are secure before connecting the power.
Young children should be supervised to ensure that they do not play with the portable lamp.
Handle the luminaire and shade with care to avoid any damage or breakage.
Select a suitable location away from liquids and hazards.
To clean, wipe with a soft damp cloth. Do NOT soak or immerse the product in water or other liquids.
Ensure that the luminaire does not come in contact with corrosive chemicals/solvents or abrasive cleaners etc